Author Topic: Quick question: Can I remove a main jet w/o removing carbs?  (Read 995 times)

0 Members and 1 Guest are viewing this topic.

Offline Gorms

  • Barkeep! Give me a beer and a
  • Hot Shot
  • ***
  • Posts: 534
Quick question: Can I remove a main jet w/o removing carbs?
« on: October 28, 2009, 07:17:41 AM »
For starters I just need to remove one jet to see if a shop has that type in stock.  Can I drain the bowl on carb 4, remove the float, unscrew the main jet emulsion tube, and remove the jet from that.  Do I risk any harm?  Bike is a '77 cb550 with the screw in type main jets.

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,828
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Quick question: Can I remove a main jet w/o removing carbs?
« Reply #1 on: October 28, 2009, 07:27:10 AM »
For starters I just need to remove one jet to see if a shop has that type in stock.  Can I drain the bowl on carb 4, remove the float, unscrew the main jet emulsion tube, and remove the jet from that.  Do I risk any harm?  Bike is a '77 cb550 with the screw in type main jets.

Yes, and it's not even that hard: just remove the bowl, dump the gas into a small container so you can return it to the gas tank (I'm cheap!  ;D ), and work on the jets.
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline Gorms

  • Barkeep! Give me a beer and a
  • Hot Shot
  • ***
  • Posts: 534
Re: Quick question: Can I remove a main jet w/o removing carbs?
« Reply #2 on: October 28, 2009, 07:37:25 AM »
Ya I went out to see how hard it could be, planning to stop if I rean into a snag.  You're right. quite easy.