Author Topic: strynboens 550 (Read 43848 times)

strynboen · « **Reply #25 on:** June 10, 2010, 12:27:16 PM »

hey thanks for kind vords..i have a littel troppel vith vrong mount of that caliber..vrong side,,but show must go on,,

75cb550 (kyle) · « **Reply #26 on:** June 10, 2010, 12:29:54 PM »

yeah. i saw that... i started to put my forks on backwards when i did my fork seals

it happens to the best of us

strynboen · « **Reply #27 on:** June 19, 2010, 12:36:57 PM »

my marchalls have some rust..got to weld it and paint..do they have other name in usa..

MasterChief750 · « **Reply #28 on:** June 19, 2010, 12:59:09 PM »

mufflers? i think thats the image

strynboen · « **Reply #29 on:** January 21, 2011, 02:25:16 AM »

got engine parts and can mowe on..think there are hope for driving this spring..i missed it last ....

strynboen · « **Reply #30 on:** January 30, 2011, 09:33:24 AM »

have put the engine back in frame...have put some flamingo in frame..set engine on it..and broke it in peases at to get the bolts in.....its easy to move the engine to the right place..and easy to remove ..

strynboen · « **Reply #31 on:** February 01, 2011, 07:14:59 AM »

made egnision plate and oil pump..have to put new viring and flex on the generator and magenet

strynboen · « **Reply #32 on:** February 06, 2011, 10:56:41 AM »

have pistons and cilender on ..

strynboen · « **Reply #33 on:** February 08, 2011, 10:29:07 AM »

have vorked on the elektro chop in weekend..and put new viring and give the stator new lacqer???

strynboen · « **Reply #34 on:** February 19, 2011, 04:18:02 AM »

here are some pics of my 400 four exh..it is stanles steel..no numbers or fabrikation mark..can see mounts are tig weldet on..så it are home work..think from an smaller model

kpier883 · « **Reply #35 on:** February 19, 2011, 07:05:22 AM »

Quote from: strynboen on November 24, 2009, 11:37:53 AM

make a littel office in end of my garage..vith heat and internet..

AND music!

strynboen · « **Reply #36 on:** February 19, 2011, 08:39:17 AM »

yes music...just as need as tools

strynboen · « **Reply #37 on:** February 22, 2011, 08:46:09 AM »

got oil on..and up...
have to get nev adjustnings tappets screws..,they are broke

strynboen · « **Reply #38 on:** March 11, 2011, 10:39:37 AM »

finish the paint job on my yamaha fs1 76"dx..that yellow are a hell to get right..still wait for the valvet tappets skrevs..from cms.nl

my helmet match the ýamaha

Gman · « **Reply #39 on:** March 12, 2011, 10:59:10 AM »

Looking good - and, du kan snakker engelsk mye bedre en min dansk! Keep it up. Cheers, Gman

-CB-Jamie- · « **Reply #40 on:** March 13, 2011, 03:53:59 PM »

Some nice looking work your doing there Strynboen, I can't wait to see this coming along

strynboen · « **Reply #41 on:** April 10, 2011, 11:49:36 AM »

got the kaburators ready,,had to weld konnektions arm for choker.it have worked loose..så 2 caps have more choke then rest..all those damed springs and small things

...but got it work..

strynboen · « **Reply #42 on:** April 10, 2011, 11:54:27 AM »

strynboen · « **Reply #43 on:** April 13, 2011, 11:02:27 AM »

its alive...P1010001

MasterChief750 · « **Reply #44 on:** April 14, 2011, 04:59:04 AM »

awesome man. great feeling isnt it.

strynboen · « **Reply #45 on:** April 16, 2011, 10:35:32 AM »

hey thief,,yes its somthing special..after 2 years work..to hear it.wrommmmm..and no clicking ortakking saunds

have weldet the exhostings system..vas some holes behind the clamps..but kut it off fix the holes and veldet the clamps back..painted it and get it on again..
alså got the tank kleaned..and painted

strynboen · « **Reply #46 on:** April 17, 2011, 11:20:21 AM »

have test drive..and it runs fine..have to vaccum syncro the carps..to get the last noising aut of it..
hamred an nylon blok in starter hole..have the starter engine on job for test

strynboen · « **Reply #47 on:** April 21, 2011, 09:43:51 AM »

have elektric starter on and painted the tank finish..

SixGun · « **Reply #48 on:** April 23, 2011, 11:13:20 AM »

Looking good

Guess you are ready for the streets now?

strynboen · « **Reply #49 on:** April 23, 2011, 11:22:58 AM »

ha ha just have to get the drive licens next month...its kost a month gage to be taken,, this days. .så better get that lisens
ones for all..still have some adjusts..shuts back in kabureters..have to thek firing time and vaccum syncro

News:

Author Topic: strynboens 550 (Read 43848 times)