Author Topic: monoshock 750 (Read 52703 times)

sander · « **Reply #25 on:** November 11, 2009, 02:00:09 PM »

Quote from: fastbroshi on November 11, 2009, 07:43:27 AM

Cool! Looking good my friend. Might as well add some gussets and one of Gordon's (I think) frame mods while you're at it. Almost forgot to ask, is that a 16 or 17 inch front wheel?

Thanks! It's a 16 inch front wheel.

Alan F. · « **Reply #26 on:** November 12, 2009, 05:10:47 AM »

Looking good Sander.
-Alan

sander · « **Reply #27 on:** November 25, 2009, 02:29:44 AM »

Oke i finally got some work done yesterday... I've made some brackets to mount the rearsets. Unfortunately my migwelder broke down so i had to do some stickwelding... great fun

As you can see the forks need to be shortened by an inch or so.

Sander

J.Webster Designs · « **Reply #28 on:** November 25, 2009, 04:00:51 AM »

what is the overall length of that swing arm, Center of the pivot bolt to Center of the adjustment slots?

cdoggy81 · « **Reply #29 on:** November 25, 2009, 06:37:29 AM »

Sander, very cool bike & ideas! I will be following this one!

( midnight08, I should have known you would be too

)

sander · « **Reply #30 on:** November 25, 2009, 09:04:52 AM »

Quote from: midnight08 on November 25, 2009, 04:00:51 AM

what is the overall length of that swing arm, Center of the pivot bolt to Center of the adjustment slots?

The bike is at my parents place... next time i'm there i will measure it for you. Probably next week.

sander · « **Reply #31 on:** December 02, 2009, 02:26:14 AM »

Quote from: midnight08 on November 25, 2009, 04:00:51 AM

what is the overall length of that swing arm, Center of the pivot bolt to Center of the adjustment slots?

It's 52cm center to center... so 20,5 inch

HedNut · « **Reply #32 on:** December 02, 2009, 04:47:11 AM »

NICE!! Mono-rear...that's bad-ass

sander · « **Reply #33 on:** May 29, 2010, 04:11:46 AM »

Hi there!

It's been a while since i've done something on my bike. We bought a new house and had to do some extensive rebuilding to it...

Anyways, here are the pics...

I have mounted the engine and lined everything up to see how much offset i need on the front sprocket to clear the 180 tire. A nice 520 chain 17 tooth 9mm offset sprocket is on it's way! Right now i'm rebuilding the brake calipers and mastercylinder for a save ride.

By the way, the suspension has just the right sag with the weight of the engine included.

Sander

captaincrash80 · « **Reply #34 on:** May 29, 2010, 05:46:34 AM »

Coming along nicely. What's that black bike you've got hiding in the background?

sander · « **Reply #35 on:** May 29, 2010, 10:10:04 AM »

Thanks! That's my previous project, a Honda VT700 Shadow. I cut out the original backbone to fit a sporty tank, home made exhaust and 2 in 1 carb manifold, suicide clutch, jockeyshift, etc...

Sander

Alan F. · « **Reply #36 on:** May 30, 2010, 02:31:17 PM »

This is a very inspiring bike, thanks for the updates. I can't wait for the next update when your chain and sprockets have arrived.
-Alan F.

Retro Rocket · « **Reply #37 on:** May 30, 2010, 03:30:00 PM »

Curious to see how this bike handles, that rear arm looks to be around 4 inches {100mm} longer than standard....

Mick

sander · « **Reply #38 on:** June 01, 2010, 12:35:38 PM »

Oh I can't wait to see how it handles! i don't know the stock length of the stock swingarm but this one is 20,5 inch (52cm).

Sander

Alan F. · « **Reply #39 on:** June 03, 2010, 04:33:32 PM »

I'm not sure but that doesn't sound much longer, maybe a couple inches at most.

There's a thread around somewhere with pics of the various 750 swingarms with measurements.

Retro Rocket · « **Reply #40 on:** June 03, 2010, 04:59:12 PM »

Quote from: Alan F. on June 03, 2010, 04:33:32 PM

I'm not sure but that doesn't sound much longer, maybe a couple inches at most.

There's a thread around somewhere with pics of the various 750 swingarms with measurements.

Alan, have a look at a standard bike and look at the gap between the front of the rear wheel and the rear frame downtube, on this bike the gap looks to be around 4 inches bigger than stock. Just an observation.

Mick

traveler · « **Reply #41 on:** June 03, 2010, 05:31:49 PM »

You should think about painting that swingarm black....it is out of proportion with the frame. It makes the frame look puny.

~Joe

Pinhead · « **Reply #42 on:** June 03, 2010, 06:50:30 PM »

Very slick looking!

void909 · « **Reply #43 on:** June 03, 2010, 08:25:34 PM »

very cool!!!

sander · « **Reply #44 on:** June 09, 2010, 06:27:41 AM »

Brakes are ready...

I'm almost done with the wiring, only thing left is the dyna ignition and the taillight. The seat is now black. I also installed the tacho from my shadow on the cb. It's pulse driven and looks a lot better than the original one. I was looking at some koso units, but they are way to expensive! Maybe later...

jaguar · « **Reply #45 on:** June 09, 2010, 06:44:11 AM »

what pistons are those?
30 or 32 mm?

sander · « **Reply #46 on:** June 09, 2010, 07:47:02 AM »

30mm pistons

jaguar · « **Reply #47 on:** June 09, 2010, 02:26:43 PM »

dont look like oem pistons

Tintop · « **Reply #48 on:** June 09, 2010, 05:55:38 PM »

This is a period mono shock that raced in Canada in the 70's. This one has a 550, there was at least one built with a 750 that was raced. It uses a TZ style arrangement with the shock laying horizontal over the engine. Helps keep the wheel base very compact.

A 'continuation' frame / swingarm by the original builder (around my 78 550), is planned to start this fall.

rickmoore24 · « **Reply #49 on:** June 09, 2010, 06:23:06 PM »

This is insane! Very cool build so far, can't wait to see her all done.

News:

Author Topic: monoshock 750 (Read 52703 times)

traveler