Cleaned the chain with brake cleaner, and oiled up with 20-50 wt oil.
I know its probably not the right way to do it, but, its all I have at this time.
Better than nothing IMO.
Also took the front wheel off cause it squeals and tightens up when turning. When off, noticed the axle was loose on the wheel its self and that the caliper wasn't adjust properly, tightened and adjusted..............works alittle better.
Needs pads, and maybe a caliper rebuild, will do in the very near future. Would really prefer to replace the entire front braking system (MC, Caliper, Hoses/lines and possibly the brake switch).
Rode it to work, front end seems a little more stabile, doesn't hop as much when cornering. Doesn't squeal except on braking, not while moving anymore.