Author Topic: What did you do to your bike today ? (Read 3208231 times)

longshanks · « **Reply #8200 on:** November 10, 2011, 10:56:01 AM »

Quote from: CycleRanger on November 10, 2011, 07:23:37 AM

Quote from: CBNJ74 on November 10, 2011, 06:53:04 AM
I rode down to AL's dinner and jumped a tank filled with sharks.

Fonzie Jumps the Shark

Aaayyyyyyyyy!

Always remember to wear your leather jacket when water skiing.

Greggo · « **Reply #8201 on:** November 10, 2011, 11:44:35 AM »

Pulled those sh1tty Red Wing shocks off the back so I can give them back to my co worker. Put the surprisingly better CycleX shorty shocks back on until I find a set of Koni's I can afford.

thrutheframe · « **Reply #8202 on:** November 10, 2011, 03:26:03 PM »

Put the 650 away, then rode the 360 back to the house. I'm in San Antonio for 8 days the Florida for 3 days. When I get back the 360 is going inside for the duration of the winter.

Dimitri13 · « **Reply #8203 on:** November 10, 2011, 04:17:01 PM »

Rode the hell out of it, about 100 miles. Didn't break down on me once (except when I forgot to turn the petcock back on), a step in the right direction. Still running lean though >:|

Radam · « **Reply #8204 on:** November 10, 2011, 04:51:46 PM »

Here's a couple pics for you Terry.

I really need to get some better ones.

mjstone · « **Reply #8205 on:** November 10, 2011, 05:03:55 PM »

Quote from: Greggo on November 10, 2011, 11:44:35 AM

Pulled those sh1tty Red Wing shocks off the back so I can give them back to my co worker. Put the surprisingly better CycleX shorty shocks back on until I find a set of Koni's I can afford.

Hey, Greggo, how did that exhaust of yours work out?

MJ

Brown Bomber · « **Reply #8206 on:** November 10, 2011, 05:48:23 PM »

Quote from: Radam on November 10, 2011, 04:51:46 PM

Here's a couple pics for you Terry.

I really need to get some better ones.

Good looking Beemer!

Greggo · « **Reply #8207 on:** November 11, 2011, 01:07:18 AM »

Quote from: mjstone on November 10, 2011, 05:03:55 PM

Quote from: Greggo on November 10, 2011, 11:44:35 AM
Pulled those sh1tty Red Wing shocks off the back so I can give them back to my co worker. Put the surprisingly better CycleX shorty shocks back on until I find a set of Koni's I can afford.

Hey, Greggo, how did that exhaust of yours work out?

MJ

I fooled with it for a while, fitting the pipes this way and that. Even at its best, it didn't fit real well, and I wasn't happy with it. So, I put it back on ebay (where I got it from), and it sold in less than an hour to some reseller. Needed the dough for the 750 project. I'm going to fit a Hooker 4-1 that I've been saving - looks brand new, and has some crazy looking equal length headers.

Terry in Australia · « **Reply #8208 on:** November 11, 2011, 03:39:42 AM »

Quote from: Radam on November 10, 2011, 04:51:46 PM

Here's a couple pics for you Terry.

I really need to get some better ones.

Hey that looks great mate, I'd never seen one with aftermarket wheels before, but they really give it a clean look. If your wife ever tells you to get rid of it, let me know right away! Cheers, Terry.

Tree · « **Reply #8209 on:** November 12, 2011, 02:23:30 PM »

Changed the Fork Oil to a 20 Weight. Like it much better. Learned everything about how to do it right here Yea Forum!

mjstone · « **Reply #8210 on:** November 12, 2011, 02:55:17 PM »

Rode two up to Goodrich to pay some more on the new bike. My son hadn't seen it in the flesh yet. On the way back I had it up to 7 grand in third before popping it up into fifth. Didn't want to get carried away or get a ticket!

MJ

DJ_AX · « **Reply #8211 on:** November 12, 2011, 03:05:28 PM »

Got squirrly on the freeway...

On my way to work today while changing lanes on the freeway @ 70mph... I hit a row of pot holes that made the bike go squirrly pretty bad (tank slapper style?) ... it happened so fast I didn't have time to be scared but only to observe in slow motion. It started correcting itself right away, getting less and less, but seemed to take a while to completely stop. I almost thought for a minute my rim was bent or my tire was flattened. But it turned out to be fine. Glad I was using my blinkers and not hand signaling at the time. Phew...

Retro Rocket · « **Reply #8212 on:** November 12, 2011, 03:12:44 PM »

Quote from: DJ_AX on November 12, 2011, 03:05:28 PM

Got squirrly on the freeway...

On my way to work today while changing lanes on the freeway @ 70mph... I hit a row of pot holes that made the bike go squirrly pretty bad (tank slapper style?) ... it happened so fast I didn't have time to be scared but only to observe in slow motion. It started correcting itself right away, getting less and less, but seemed to take a while to completely stop. I almost thought for a minute my rim was bent or my tire was flattened. But it turned out to be fine. Glad I was using my blinkers and not hand signaling at the time. Phew...

And there is the reason why i like steering dampers, no headshakes.....

Cqyqte · « **Reply #8213 on:** November 12, 2011, 04:44:57 PM »

Fiberglassed the cafe hump for my CB450

Tews19 · « **Reply #8214 on:** November 12, 2011, 07:04:34 PM »

Finally fixed a fuel leak from my petcock that occurred a few days ago.. Bought an rubber o ring from ace hardware for .49 cent..... Hasnt leaked since then took her for a lil ride to meet up with a buddy.

CycleRanger · « **Reply #8215 on:** November 12, 2011, 08:55:17 PM »

It was a beautiful day for a ride but I stayed home and worked on the XL250s.

Reassembled the forks, and began the reconstruction.

mrbreeze · « **Reply #8216 on:** November 13, 2011, 12:42:06 PM »

Yesterday.........took advantage of the weather bein' nice and put about 50 miles on.
Today......bought some goodies from Joker Machine for her......black tank emblems, cool lookin' brake stay rod, and a t shirt to add to my never ending collection!!!

mono · « **Reply #8217 on:** November 13, 2011, 01:19:33 PM »

Painted my seat pan today with DupliColor. Must have missed cleaning a spot during prep, cause the paint lifted after the 2nd coat. Now i have to wait for it to get bone dry so i can sand it - blargghhhh.

WhyNot2 · « **Reply #8218 on:** November 13, 2011, 03:27:47 PM »

Stripped the paint from my CB350F fuel tank...................

Install the rear turn signals on my 750K5.

Wanting to paint the CB350F the Honda orange color, any help on where I can get the paint from is much appreciated.

Thanks

Stev-o · « **Reply #8219 on:** November 13, 2011, 03:38:24 PM »

Paint from Don:

http://www.vintagehondapaint.com/SITE/VINTAGEHONDAPAINT.html

WhyNot2 · « **Reply #8220 on:** November 13, 2011, 03:45:55 PM »

Quote from: Stev-o on November 13, 2011, 03:38:24 PM

Paint from Don:

http://www.vintagehondapaint.com/SITE/VINTAGEHONDAPAINT.html

Thanks bro...............

fastbroshi · « **Reply #8221 on:** November 13, 2011, 04:57:06 PM »

Had the front tire rebalanced, seems the tire manufacturer's placement of the red dot is still a mystery to some. Also changed the sparkplugs, cleaned the air filter on the VFR. What a pain in the butt that was.

Magpie · « **Reply #8222 on:** November 13, 2011, 07:00:57 PM »

Working on a friends CB750 K6 to get it running after he lost some interest after having sit unloved for 6 years. Turned a pile of small pieces into a right hand switch. Thanks to those that posted info about doing this! Cliff.

70CB750 · « **Reply #8223 on:** November 13, 2011, 07:33:29 PM »

Woke her up after a week. Took her for a short spin. Cleaned front disc, replaced pads and later on replaced sprockets and the chain. Tsubaki rules!

grcamna2 · « **Reply #8224 on:** November 13, 2011, 08:45:06 PM »

I replaced my 1 Heavy,gas filled carb float w/ a new one & installed the carbs,I then installed some Works Performance dual rate front fork springs(Very nice products!) & put on the correct lighter springs for my Hagon rear shocks and took it for a RIDE...she handles real nice now & doesn't whack me in the back over those "Frost Heaves" any more.

News:

Author Topic: What did you do to your bike today ? (Read 3208231 times)