...changed the rusted ignition plate and only two kicks later the K1 engine was running but it sounds strange
Cylinder #1 stayed cold
Checked everything but no heat and no sound from Cylinder 1
7 Minutes later I saw that one little screw ( sync.-connector) at the carb 1 was missing, put a new screw in and
everything was ok
Engine was done by the PO
Fresh bore/hone and new pistons he said and that the engine
only run for 10 Minutes after the rebuild. Seems to be true
Took an endoscope and saw new Pistons inside and today
I was going to change the oil but it came out golden ! Engine sounds real good, has good oil pressure and no noise from
the head, the bike is running real quiet but not the HM 300
Have a good one...Georg