Topic: What did you do to your bike today ?

[tweakin]

I really like the pipe, I have had a few now.  You will more than likely need to re-jet and tune your carbs to fit the pipe.  Both times I have ran the pipe it has been on non- stock bikes (836 & 915) so I can't speak to the tuning changes needed going to the motogp pipe with a stock engine.
 

Finished the K1

Beautiful, how do you like that pipe. I've been thinking of grabbing a pipe from motogp werks, they look so sharp in stainless steel. Did you have to do any major tuning or jetting?

[strynboen]

got the 500 twin on a short trip..gearshift vas not smooth..so it vent on the lifttabel..
 somone have veldet  the gearpedal on..and the clip missing so it can be pulled/pushed ca 10 mm .. have to weld a nev end vith splines on..have some spares  ends from a moped..but have to take it aut for insp..hope to veld it direkt on the skifter arm..make it easyer to line up
lot of power in this 500 twins

have no idea hvat to make aut of it..crome are shot ,,paint are gone seat loks like #$%*..it runs have "new" tires chain /spokes..so can be running easy
but vill kost a lot to make as new..


but sell a 500t?? no"one ...like this bastars...somone say ...cafe it...to get the money free

[750K]

I really like the pipe, I have had a few now.  You will more than likely need to re-jet and tune your carbs to fit the pipe.  Both times I have ran the pipe it has been on non- stock bikes (836 & 915) so I can't speak to the tuning changes needed going to the motogp pipe with a stock engine.
 

Finished the K1

Beautiful, how do you like that pipe. I've been thinking of grabbing a pipe from motogp werks, they look so sharp in stainless steel. Did you have to do any major tuning or jetting?

Cheers, I'm on the fence as the 4-1 I'm currently running is in good shape and I like the sound of it. I'm jetted almost prefect but I need to do a touch more mid range tuning, has a tiny stumble in the 1/2 to 3/4 range.

[MCRider]

Tweakin: Very nice!

Query: Do the Joker valve caps foul the petcock?

They fit great, no interference.

I know they are pricey. But I may have to get set.   

[tweakin]

Tweakin: Very nice!

Query: Do the Joker valve caps foul the petcock?

They fit great, no interference.

I know they are pricey. But I may have to get set.   

They are pricey but I am a sucker for freshly machined parts.  The fit is close but works well. 

[Stev-o]

Took my RD350 to the Austin F1 track yesterday, wish I could have ridden on the track!



My brother had a test day in his IMSA lites race car, he had four 25 min sessions on this awesome 3.427 mile track. Top speed on the long straight to turn #1 is approx 160 mph.





There was a light drizzle in the morning, but perfect conditions in the afternoon.
Was a good day, no problems or damage to the race car, prolly cuz I wasn't the driver!

[tweakin]

^^^ Nice Stev-O.  I forgot you had an RD.

[Stev-o]

^^^ Nice Stev-O.  I forgot you had an RD.

Thanks. It's my toy, kinda like your 350.  Perfect pit bike. For some reason, I get more comments about this bike when I'm out on it than any of my other bikes.

[tweakin]

Yep, people are always drawn to the 350.  I get so many offers to purchase it.

^^^ Nice Stev-O.  I forgot you had an RD.

Thanks. It's my toy, kinda like your 350.  Perfect pit bike. For some reason, I get more comments about this bike when I'm out on it than any of my other bikes.

[goldarrow]

So shiny!

[MoMo]

^^^ Nice Stev-O.  I forgot you had an RD.

Thanks. It's my toy, kinda like your 350.  Perfect pit bike. For some reason, I get more comments about this bike when I'm out on it than any of my other bikes.

weird like that Steve,  I get more comments when I am out on the Suzi S32 than any other bike I've had...Larry

[Hon3ybadger]

Today I... adjusted the valves, installed the valve cover with new hardware and sanded down the tappet covers for polishing. Then I ordered 300+ in new parts. I love tax returns.

[mjstone]

Won't be riding for a while.  Bike died on the way to work this morning.  -7F temps around 4:30 this morning.  Was pulling into the gas station and it stalled out.  Couldn't get the kick starter to turn the engine over.  It appears that the engine may be seized.

MJ

[alacrity]

I rode mine for about 80miles around town to meetings.  I also fitted a bit of cotton rope around the well next to plug #4 because one of the rocker shaft cover o-rings is leaking again :-(.  Except for that , it RAILS. :-)


Sent from my iPhone using Tapatalk

[dave500]

Took my RD350 to the Austin F1 track yesterday, wish I could have ridden on the track!



My brother had a test day in his IMSA lites race car, he had four 25 min sessions on this awesome 3.427 mile track. Top speed on the long straight to turn #1 is approx 160 mph.





There was a light drizzle in the morning, but perfect conditions in the afternoon.
Was a good day, no problems or damage to the race car, prolly cuz I wasn't the driver!

i want that bike man!great for embarrasing so much larger bikes,which is where its at!

[Stev-o]

Took my RD350 to the Austin F1 track yesterday, wish I could have ridden on the track!



My brother had a test day in his IMSA lites race car, he had four 25 min sessions on this awesome 3.427 mile track. Top speed on the long straight to turn #1 is approx 160 mph.





There was a light drizzle in the morning, but perfect conditions in the afternoon.
Was a good day, no problems or damage to the race car, prolly cuz I wasn't the driver!

i want that bike man!great for embarrasing so much larger bikes,which is where its at!

It's a fun little bike.   Come and pick it up - it's yours Dave!

[dave500]

thanks stevo ill be right over.

[mrbreeze]

Yeah Steve......you would sh!t if he showed up at your door 2 days from now pullin' an empty trailer!!

[750K]

Started pulling the 72 750 apart, parting it out and I'm keeping the motor and carbs. Amazing how quick they come apart vs. go back together. Had the crash bar, pipes, carbs, wiring and cables etc etc off in under an hour, will pull the motor on fri. Too bad the hm341's were so rotten.

[fire113]

...completed the K0 carbs and the exchange K0 seat lock arrived ÄÄÄHHHHHHHMMMM nope! inside the package was a K1 seat lock   

[fire113]

...stopped the winter sleep from the K1, cleaned her and drove all day 

[fire113]

...as I came back I woke up Candy from the winter sleep, did 2 kicks and the engine was running.
Came back in the moon light, it's #$%*ing cold without the sun 

 

[Terry in Australia]

...stopped the winter sleep from the K1, cleaned her and drove all day 

That's a sweet K1 Georg, I love those bar-end blinkers, but I can't see any on the back? Do you not need rear blinkers with those ones on your bars? Cheers, Terry.

[fire113]

G'Day Terry,

...THX and nope, no rear blinkers needed wit this "Ochsenauge" at the front, it has two lenses for the back and the front.
https://www.google.de/search?q=ochsenaugen+blinker+hella&tbm=isch&tbo=u&source=univ&sa=X&ei=B6obU6_sBoHetAaywoHgBQ&ved=0CDcQsAQ&biw=1504&bih=887

Have a good one...Georg

[Ace]

Finally took the K1 out with Hastenbrucke for a coffee. About a 20 mile ride to his place, up the coast then home again.  All up I did about 100 miles. Weather was finally cool.