« previous next »
Pages: 1 ... 675 676 [677] 678 679 ... 1333   Go Down

Author Topic: What did you do to your bike today ?  (Read 3205982 times)

0 Members and 7 Guests are viewing this topic.

Offline Proto

  • Enthusiast
  • **
  • Posts: 164
  • 1976 CB750F
Re: What did you do to your bike today ?
« Reply #16900 on: March 16, 2014, 02:42:51 PM »
Put a new tire on the F1 today.  Went with a cheap one as an experiment.  Last two quality tires lasted a little over 5000 miles each.  Will try this one out and see what it will do.  I don't hot rod this bike but I sure go through tires like I did on my K1 back in high school!
Logged
1976 Honda CB-750F1
2013 Harley Davidson Ultra Classic

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,545
  • Bike almost back to the 70's 2015
Re: What did you do to your bike today ?
« Reply #16901 on: March 16, 2014, 02:44:29 PM »
Quote from: nccb on March 16, 2014, 02:29:52 PM
PeWe, that is an awesome color.
Thanks, I agree ;)
Candy Sapphire Blue from Yamiya750.... My bike had Candy Sapphire Blue from the very beginning but more turquoise tone. This is closer to sapphire gem stone and look much  better :)
Honda DAX was often in Candy Sapphire Blue
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: What did you do to your bike today ?
« Reply #16902 on: March 16, 2014, 03:28:44 PM »
I sanded down my rear wheel hub with 500g, phew! feels like a loooong day's worth of work...
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: What did you do to your bike today ?
« Reply #16903 on: March 16, 2014, 05:27:43 PM »
Quote from: edwardmorris on March 16, 2014, 03:28:44 PM
I sanded down my rear wheel hub with 500g, phew! feels like a loooong day's worth of work...
By hand?  :o
That's what a large nylon wheel is for  ;)
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: What did you do to your bike today ?
« Reply #16904 on: March 16, 2014, 07:13:22 PM »
Quote from: flybox1 on March 16, 2014, 05:27:43 PM
Quote from: edwardmorris on March 16, 2014, 03:28:44 PM
I sanded down my rear wheel hub with 500g, phew! feels like a loooong day's worth of work...
By hand?  :o
That's what a large nylon wheel is for  ;)
Yes, unfortunately by hand.



P.S. Have you stopped kicking at the dogs yet  :P
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: What did you do to your bike today ?
« Reply #16905 on: March 16, 2014, 07:15:52 PM »
Anyway, you got rid of those nasty spoke scars.  ;D
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: What did you do to your bike today ?
« Reply #16906 on: March 16, 2014, 07:18:35 PM »
Quote from: MCRider on March 16, 2014, 07:15:52 PM
Anyway, you got rid of those nasty spoke scars.  ;D
That's what ate up most of the time and sanding sheets. I eventually sped it up a little by sanding them down with 240 grit dremel attachment, but without digging in one spot. Hard to explain how, it was tricky but glad that its not uneven anymore...
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: What did you do to your bike today ?
« Reply #16907 on: March 16, 2014, 09:17:16 PM »
Quote from: edwardmorris on March 16, 2014, 07:18:35 PM
Quote from: MCRider on March 16, 2014, 07:15:52 PM
Anyway, you got rid of those nasty spoke scars.  ;D
That's what ate up most of the time and sanding sheets. I eventually sped it up a little by sanding them down with 240 grit dremel attachment, but without digging in one spot. Hard to explain how, it was tricky but glad that its not uneven anymore...
I paid a "pro" (begins with "Carp..") to polish my hub.  he did a great job except he didn't take out the scars. Even though they are partially hidden by the spokes themselves, you can still see them or at least I can. I did the same thing and sanded them out, then repolished the sanding.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,545
  • Bike almost back to the 70's 2015
Re: What did you do to your bike today ?
« Reply #16908 on: March 17, 2014, 03:42:06 AM »
The spoke scars guided me how to lace the wheels :)
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: What did you do to your bike today ?
« Reply #16909 on: March 17, 2014, 07:21:07 AM »
Quote from: edwardmorris on March 16, 2014, 07:13:22 PM
Quote from: flybox1 on March 16, 2014, 05:27:43 PM
Quote from: edwardmorris on March 16, 2014, 03:28:44 PM
I sanded down my rear wheel hub with 500g, phew! feels like a loooong day's worth of work...
By hand?  :o
That's what a large nylon wheel is for  ;)
Yes, unfortunately by hand.

P.S. Have you stopped kicking at the dogs yet  :P
Looks good Edward.  ;D fresh metal always looks good.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: What did you do to your bike today ?
« Reply #16910 on: March 17, 2014, 07:46:01 AM »
Quote from: PeWe on March 17, 2014, 03:42:06 AM
The spoke scars guided me how to lace the wheels :)
Well, there's that.

Actually you have a point, they do help.   :D
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline mcswny

  • Hot Shot
  • ***
  • Posts: 548
Re: What did you do to your bike today ?
« Reply #16911 on: March 17, 2014, 10:36:12 AM »

Quote from: Terry in Australia on February 22, 2014, 03:26:49 AM
This will probably upset some of the members here, so I apologise in advance, but Cafe Racers suck! Well, the riding position does suck when you're a fat broken almost 54 year old anyways. After riding mine for shorter and shorter distances in recent years, I decided to swap sleek and sheik, for comfy and practical.

I wanted to swap the front end over to a GL1000 setup anyway, so while I was at it, I took the opportunity to swap the Laverda Jota bars for a pair of Superbike bars, and ditched the Cafe seat for a nice new K0 repro that's actually comfortable.



The forks already had nice progressive springs fitted, so I just added a NOS S&W air kit with remote gauge, and of course, new seals. Surprisingly, after 2 weeks since I installed them, they're still holding air!



I couldn't use my K2 gauges (no "Rhino Horn" on the Goldwing top triple) so I used some K4 gauges, but of course they're not a bolt on, so I chopped up the K4 bracket and the GL1000 bracket and welded them together, and am happy with the result.




And similarly, I mated my K6 (?) fender to the GL1000 fender bracket and riveted them together. There's a little more clearance than I'd like as the GL1000 bracket is a tad taller, but it'll do to get the bike thru the roadworthy inspection.



I've still gotta get some spokes to lace the matching Borrani rear rim to another hub, but the guys at Buchanan's aren't being all that helpful, I sent them an email asking what heavy duty stainless spoke kit I needed to lace my Borrani WM5 18" rim to a K1-K6 rear hub, and they came back to say that it depended what the inside diameter of my rim is? I thought that they'd know all that stuff? Oh well, I guess I'll have to do their job for them.......... Cheers, Terry. ;D
I'm 25 (and presumably not broken) and I still prefer comfy and practical.



Sent from my iPhone using Tapatalk
Logged
1972 CB750 K2
1997 XR600r (street legal)
1975 XL250
198 XR80

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,545
  • Bike almost back to the 70's 2015
Re: What did you do to your bike today ?
« Reply #16912 on: March 17, 2014, 01:52:13 PM »
OEM foot pegs might increase comfort too
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,289
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #16913 on: March 18, 2014, 02:18:14 AM »
Thanks guys, and yep, the OEM pegs are going back on it too. Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,545
  • Bike almost back to the 70's 2015
Re: What did you do to your bike today ?
« Reply #16914 on: March 18, 2014, 03:47:17 AM »
Terry, the 4-1 look nice!  Yoshimura from the old days?
« Last Edit: March 19, 2014, 12:04:32 AM by PeWe »
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline atm cycles

  • Hot Shot
  • ***
  • Posts: 323
Re: What did you do to your bike today ?
« Reply #16915 on: March 18, 2014, 01:46:10 PM »
Finished mock up of rear set brackets. Finished welding cleaned up awaiting powder coat.


Sent from my iPhone using Tapatalk
Logged

Offline rb550four

  • Master
  • *****
  • Posts: 2,472
  • I'm nobody's slave and nobody's master
Re: What did you do to your bike today ?
« Reply #16916 on: March 18, 2014, 03:56:18 PM »
I went to visit my machines and kicked them all over so they don't get stuck. All good so far.
Looks like it'll be a while here before I can fire them up and take 'em for ride.
Logged
A few Honda 500's, a few Honda 550's, a few Honda 650's, '72 cb 450, a couple 500/550/650 hybrids, and 2001 750. 
  550 Snowbike -Somebody had to do it.
  http://forums.sohc4.net/index.php/topic,101678.0.html             
http://forums.sohc4.net/index.php/topic,137317.msg1550907.html#msg1550907

Offline dchautin

  • 1978 CB750k
  • Full Member
  • *
  • Posts: 23
    • My Facebook Page
Re: What did you do to your bike today ?
« Reply #16917 on: March 18, 2014, 08:00:25 PM »
I went in my garage and looked at mine while the dog peed. Lol. Riding tomorrow
Logged
Registered Architect
Wannabe cool biker. :)

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,100
  • I love to restore & travel. Keep'em Going Strong !
Re: What did you do to your bike today ?
« Reply #16918 on: March 18, 2014, 08:12:50 PM »
I like that "riding tomorrow"  ;). I'm still looking forward to them street sweeping ALL that sand and gravel off of the roads & 40+ degrees.
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: What did you do to your bike today ?
« Reply #16919 on: March 19, 2014, 03:22:52 AM »
2nd day this week of riding to work ;D...Larry
Logged

Offline fire113

  • Expert
  • ****
  • Posts: 1,011
Re: What did you do to your bike today ?
« Reply #16920 on: March 19, 2014, 03:55:43 PM »
...did the storage thing
Logged
Honda CB750 K0 & K0 & K1 & K1 & K2 & K2 & K6

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,100
  • I love to restore & travel. Keep'em Going Strong !
Re: What did you do to your bike today ?
« Reply #16921 on: March 19, 2014, 06:19:03 PM »
stackable & organized.  ;)
I NEED more bench space in my storage locker/shop... and when I get everything out of boxes...,I'll be doing better.
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: What did you do to your bike today ?
« Reply #16922 on: March 19, 2014, 06:22:00 PM »
Quote from: MoMo on March 19, 2014, 03:22:52 AM
2nd day this week of riding to work ;D...Larry


Unfortunately rode home in the rain
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,274
  • Central Texas
Re: What did you do to your bike today ?
« Reply #16923 on: March 19, 2014, 07:08:06 PM »
Quote from: MoMo on March 19, 2014, 06:22:00 PM
Quote from: MoMo on March 19, 2014, 03:22:52 AM
2nd day this week of riding to work ;D...Larry


Unfortunately rode home in the rain


Saw a guy riding a PC today on my way home.  That bike is very quiet.
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

DH

  • Guest
Re: What did you do to your bike today ?
« Reply #16924 on: March 19, 2014, 07:15:30 PM »
Since I like to build things, and because I have too much time on my hands, I built
me a genuine "Jim's" version of an updated fuse holder/box. I got the idea elsewhere, but gathered all the parts and did research to come up with what you see here. It's made out of a "metri pack 280" connector to hold the fuses. Had to go to 2 different places to get all the components, but it turned out pretty good. Now
featuring "ATO" style mini fuses. Got crimp pliers from VINTAGECONNECTIONS.COM
The tool should work for ALL connectors on the SOHC4 of any displacement.
And believe me, if you aint got the tool, you wish you did. Excellent price/quality/fast service. I felt so good, I ordered me up some extra male and female 3.5mm Honda
connectors for future electrical adventures :)..Haven't tested it yet. Let's see if I can start a fire....I'll post results ;)
Logged
Pages: 1 ... 675 676 [677] 678 679 ... 1333   Go Up
« previous next »