Author Topic: What did you do to your bike today ?  (Read 3192883 times)

0 Members and 16 Guests are viewing this topic.

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,883
    • http://forums.sohc4.net/index.php?PHPSESSID=uk7re22sv3nkiggndgk1kg6m06&/topic,60973.0.html
Re: What did you do to your bike today ?
« Reply #18425 on: September 04, 2014, 07:53:18 am »
senter stand are  nice..if  one the wheels need to be taken off..or any other work on the bike.. ???
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,276
Re: What did you do to your bike today ?
« Reply #18426 on: September 04, 2014, 08:44:48 am »
senter stand are  nice..if  one the wheels need to be taken off..or any other work on the bike.. ???
[/quote/]

I agree, I don't think anything is gained by lopping them off. They are nearly invisible and you don't have to run the stand all the time. I run a bare bracket and just pop the pivot bolt and stand in for when I want to do maintenance
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: What did you do to your bike today ?
« Reply #18427 on: September 04, 2014, 09:45:21 am »
senter stand are  nice..if  one the wheels need to be taken off..or any other work on the bike.. ???
[/quote/]

I agree, I don't think anything is gained by lopping them off. They are nearly invisible and you don't have to run the stand all the time. I run a bare bracket and just pop the pivot bolt and stand in for when I want to do maintenance

I did this on my first 550 build. Worst thing one can possibly do IMO.
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline Jerm

  • Full Member
  • *
  • Posts: 6
Re: What did you do to your bike today ?
« Reply #18428 on: September 04, 2014, 10:46:33 am »
made a little bracket and put on some mini turns

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #18429 on: September 05, 2014, 12:30:07 am »
senter stand are  nice..if  one the wheels need to be taken off..or any other work on the bike.. ???
[/quote/]

I agree, I don't think anything is gained by lopping them off. They are nearly invisible and you don't have to run the stand all the time. I run a bare bracket and just pop the pivot bolt and stand in for when I want to do maintenance

I did this on my first 550 build. Worst thing one can possibly do IMO.

What? Worse than fitting pods? You old farts should be locked away in a nursing home the way you carry on............ ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline albertaboy

  • No way I'm a
  • Hot Shot
  • ***
  • Posts: 396
Re: What did you do to your bike today ?
« Reply #18430 on: September 05, 2014, 01:30:01 am »
senter stand are  nice..if  one the wheels need to be taken off..or any other work on the bike.. ???
[/quote/]

I agree, I don't think anything is gained by lopping them off. They are nearly invisible and you don't have to run the stand all the time. I run a bare bracket and just pop the pivot bolt and stand in for when I want to do maintenance

I did this on my first 550 build. Worst thing one can possibly do IMO.

What? Worse than fitting pods? You old farts should be locked away in a nursing home the way you carry on............ ;D

Terry, I have to laugh. When I am working night shifts, we are always up about the same time reading the forum. We're just half a world apart is all.  Im on a "night off" right now, sitting at home but I have to keep my internal clock switched over and Im up all night.  Slightly off topic,  ok I took my bike in for a government safety inspection and It passed.  Whahoooo, :)
1975 CB750K
No where to go and all day to get there.
My build thread: http://forums.sohc4.net/index.php?topic=131424.0

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: What did you do to your bike today ?
« Reply #18431 on: September 05, 2014, 06:13:11 am »
senter stand are  nice..if  one the wheels need to be taken off..or any other work on the bike.. ???
[/quote/]

I agree, I don't think anything is gained by lopping them off. They are nearly invisible and you don't have to run the stand all the time. I run a bare bracket and just pop the pivot bolt and stand in for when I want to do maintenance

I did this on my first 550 build. Worst thing one can possibly do IMO.

What? Worse than fitting pods? You old farts should be locked away in a nursing home the way you carry on............ ;D

Lol ! In worse I mean it makes regular maintenance a PITA with no center stand.
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,625
  • Endeavor to persevere
Re: What did you do to your bike today ?
« Reply #18432 on: September 05, 2014, 01:34:44 pm »
Nothing, for the same reason as usual. Working on the MG. But I thought I would provide photo evidence of my efforts for your amusement.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #18433 on: September 05, 2014, 05:08:53 pm »
senter stand are  nice..if  one the wheels need to be taken off..or any other work on the bike.. ???
[/quote/]

I agree, I don't think anything is gained by lopping them off. They are nearly invisible and you don't have to run the stand all the time. I run a bare bracket and just pop the pivot bolt and stand in for when I want to do maintenance

I did this on my first 550 build. Worst thing one can possibly do IMO.

What? Worse than fitting pods? You old farts should be locked away in a nursing home the way you carry on............ ;D

Lol ! In worse I mean it makes regular maintenance a PITA with no center stand.

Ha ha, I know mate, I was just trying to lighten things up. What I did on the 750 I'm building for a customer (who wanted the centre stand tabs lopped off) is use a couple of cheap car Jack stands under the passenger footpeg hangers with shop towels to avoid scratching the newly powdercoated frame, and it works as well as a centre stand for removing the rear wheel, adjusting the chain etc. I wouldn't do it on one of my own bikes, but that's a personal preference. Cheers, Terry. ;D

I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: What did you do to your bike today ?
« Reply #18434 on: September 05, 2014, 05:34:39 pm »
are the stands stored in the open triangle area Terry?   :P   Couldn't imagine a bike sans center stand...Larry

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #18435 on: September 05, 2014, 05:43:43 pm »
are the stands stored in the open triangle area Terry?   :P   Couldn't imagine a bike sans center stand...Larry

Aaahhh, you old farts are still out there, sitting up in your rocking chairs with your shawls draped over your shoulders to keep the grim reaper at bay, intermittently dribbling into your adult diapers, and mumbling incoherently about the war.

Get with the program Larry, lots of bikes don't even come from the factory with centre stands nowadays, but (shock horror) somehow folks are still able to work on them? Silly old bugger.............. ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: What did you do to your bike today ?
« Reply #18436 on: September 05, 2014, 05:50:17 pm »
Old?????????????  and cranky too btw.   to go with the PC Golf Cart you so disdain I purchased one VW Golf-all decked out with a fart sounding muffler and stupidly expensive aftermarket wheels and to top it off a personalized gear shift knob.  That's right, says MoMo right on the knob...Larry

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: What did you do to your bike today ?
« Reply #18437 on: September 05, 2014, 07:23:00 pm »
Installed steering stem races, got tires mounted.

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: What did you do to your bike today ?
« Reply #18438 on: September 05, 2014, 07:37:21 pm »
Nothing, for the same reason as usual. Working on the MG. But I thought I would provide photo evidence of my efforts for your amusement.

Ah...MGB rust isn't it wonderful.  How are your door posts, and rockers??
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #18439 on: September 06, 2014, 12:09:45 am »
'Twas a magnificent spring day here in Oz, so after several hours of mowing and weed whacking (Fathers Day tomorrow, so I have to be good) I decided to install the "Ricks Electrics" solid state Regulator/Rectifier on my K1 to try to get some electricity back into my battery.

Sadly it was all for nought, I suspected that it was my stator all along, but had to try the new unit to confirm it, but at least I know it's all good, and that the old OEM items will go to a good home in Mike's bike. Cheers, Terry. ;D

I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #18440 on: September 06, 2014, 12:14:04 am »
Old?????????????  and cranky too btw.   to go with the PC Golf Cart you so disdain I purchased one VW Golf-all decked out with a fart sounding muffler and stupidly expensive aftermarket wheels and to top it off a personalized gear shift knob.  That's right, says MoMo right on the knob...Larry

Ha ha, I don't mind those Golf's Larry, Georg (our German K0 wizard) sent me pics of his monster turbo Golf that bungs out around 400 BHP from memory, I wouldn't mind taking that one out on an Autobahn for some high speed fun! I think it's got a Momo steering wheel Larry, it's not yours is it? ;D
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,776
  • Northern Virginia
Re: What did you do to your bike today ?
« Reply #18441 on: September 06, 2014, 01:58:45 am »
Nothing, for the same reason as usual. Working on the MG. But I thought I would provide photo evidence of my efforts for your amusement.

Ah...MGB rust isn't it wonderful.  How are your door posts, and rockers??

The owner of the shop I worked for a while was going to install LS7 in old MG with Corvette transmission and rear half axles and Ford steering - not sure if he finished it but sure was a cool project.

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: What did you do to your bike today ?
« Reply #18442 on: September 06, 2014, 02:07:35 am »
Old?????????????  and cranky too btw.   to go with the PC Golf Cart you so disdain I purchased one VW Golf-all decked out with a fart sounding muffler and stupidly expensive aftermarket wheels and to top it off a personalized gear shift knob.  That's right, says MoMo right on the knob...Larry

Ha ha, I don't mind those Golf's Larry, Georg (our German K0 wizard) sent me pics of his monster turbo Golf that bungs out around 400 BHP from memory, I wouldn't mind taking that one out on an Autobahn for some high speed fun! I think it's got a Momo steering wheel Larry, it's not yours is it? ;D






Old?????????????  and cranky too btw.   to go with the PC Golf Cart you so disdain I purchased one VW Golf-all decked out with a fart sounding muffler and stupidly expensive aftermarket wheels and to top it off a personalized gear shift knob.  That's right, says MoMo right on the knob...Larry

Ha ha, I don't mind those Golf's Larry, Georg (our German K0 wizard) sent me pics of his monster turbo Golf that bungs out around 400 BHP from memory, I wouldn't mind taking that one out on an Autobahn for some high speed fun! I think it's got a Momo steering wheel Larry, it's not yours is it? ;D





Looks like I'll be in the market for a new steering wheel ::).     I am not a VW fan but I do like this little car, zips around corners and is fast enough for a 67 year old cranky, old man, best part is the 1500 price.....Larry

Offline juan_carlito

  • Lost & Lovin It!
  • Full Member
  • *
  • Posts: 55
Re: What did you do to your bike today ?
« Reply #18443 on: September 06, 2014, 02:14:29 am »
I cleaned up my carbs up some more which involved pulling old silicone from PO out of the air cut off valve ports . . . Thanks PO…. so now I believe they are ready to put back together once I get some more answers in regards to the carbs.
Then I decided it was about time to make my own build thread as well as introduction on here . . . and another forum lol
Now its 2:15 am and sleep is most definitely needed!

For those interested see my build thread for the questions at hand as well as some photos so far
http://forums.sohc4.net/index.php?topic=140963.0

OR

See this thread with the carb specific questions only
http://forums.sohc4.net/index.php?topic=140919.0
I bought a bike that didn't run to force myself to learn the ropes! She runs now ;)
Join me as I take my first ever bike and turn her into what I picture in my head!
https://www.youtube.com/juancarlitoonline

My Build Thread: http://forums.sohc4.net/index.php?topic=140963.0

-1979 CB650 (First bike-Bobber Project)

Offline fire113

  • Expert
  • ****
  • Posts: 1,008
Re: What did you do to your bike today ?
« Reply #18444 on: September 06, 2014, 08:41:46 am »
Old?????????????  and cranky too btw.   to go with the PC Golf Cart you so disdain I purchased one VW Golf-all decked out with a fart sounding muffler and stupidly expensive aftermarket wheels and to top it off a personalized gear shift knob.  That's right, says MoMo right on the knob...Larry

Ha ha, I don't mind those Golf's Larry, Georg (our German K0 wizard) sent me pics of his monster turbo Golf that bungs out around 400 BHP from memory, I wouldn't mind taking that one out on an Autobahn for some high speed fun! I think it's got a Momo steering wheel Larry, it's not yours is it? ;D

...did the Autobahn-thing with the Golf MK1   ??? but something was wrong  :P fixed it and did the Autobahn-thing again  ;D
After it I started the gas tank that still needs the decor to be complete.


Have a good one...Georg
Honda CB750 K0 & K0 & K1 & K1 & K2 & K2 & K6

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: What did you do to your bike today ?
« Reply #18445 on: September 06, 2014, 08:46:35 am »
^^  very nice tank you have, should look great when done...Larry

Offline mcswny

  • Hot Shot
  • ***
  • Posts: 548
Re: What did you do to your bike today ?
« Reply #18446 on: September 06, 2014, 09:30:57 am »
Spliced in new copper spark plug wire, new caps and plugs. Purring like a kitten.
1972 CB750 K2
1997 XR600r (street legal)
1975 XL250
198 XR80

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,625
  • Endeavor to persevere
Re: What did you do to your bike today ?
« Reply #18447 on: September 06, 2014, 10:47:38 am »
Nothing, for the same reason as usual. Working on the MG. But I thought I would provide photo evidence of my efforts for your amusement.

Ah...MGB rust isn't it wonderful.  How are your door posts, and rockers??

The door posts and floors are solid. The rockers are bad at the ends, but appear solid in the middle. I have 3 or the 4 pieces to replace the right side. I have the outer rocker for the left side, but based on what I am seeing I need to order the middle stiffener piece for that side as well.

The several days I am working on it this week turned into mostly demo. I will have to weld in the new metal over the next several weekends.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,273
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #18448 on: September 06, 2014, 04:14:20 pm »

Looks like I'll be in the market for a new steering wheel ::).     I am not a VW fan but I do like this little car, zips around corners and is fast enough for a 67 year old cranky, old man, best part is the 1500 price.....Larry

I know what you mean Larry, last year I had to give my son our "spare" car so he could get to work after he had some problems with his own car, and after a couple of weeks I realised that I needed another car to replace it.

Not wanting to spend a lot of dough on a car that I'd only use on weekends, (I've got a company truck to drive to and from work, but it's too much of a hassle to use after hours, tax implications etc) I did an internet search for a cheapie and found a 1995 Subaru Liberty (Legacy in the US) that was a non-runner, but for $450.00, worth a look.

The owners had spent some money on it, and it was running fine until they hired a "Mobile Mechanic" to replace a leaking cam seal, and the cam belts. Once he'd done the work, he couldn't get it running, so he told them that it was just flooded, and to leave the spark plugs out overnight, and it'd be fine in the morning. It didn't start the next day, so they called him again, and this time he told them that the crank position sensor would need replacing, and quoted them 500 bucks to fix it, which they couldn't afford.

Bottom line was he'd messed up the cam timing, so after a few weeks they gave up trying to get it running and bought another car. I liked the look of it, so I paid them and asked if I could come back in a couple of days and try to get it running. Thanks to the guys on one of the US Subaru sites I was able to get some info on how to properly time it, so went back to their place, re-set the valve timing, and drove it home.

I did have a couple of issues with a bad water pump and the typical Subaru air lock in the cooling system, but ace mechanic "Trueblue" here told me how to fix that, and nothing's gone wrong with it since. I've never owned a Subaru before, but it's a great little car, and I actually prefer to drive it over our other cars, as does my wife and oldest son, so the way things are going, I might have to buy another one! Cheers, Terry. ;D     
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: What did you do to your bike today ?
« Reply #18449 on: September 06, 2014, 05:17:00 pm »
Something something daaark siiide....something something KOM-pleete