I think my head gasket is shot... I've been getting more oil on the jug's top fins enough to cause a little puddle when on the side stand.
Looks like an engine removal is my future this winter...
Or, better yet...
Is 754's weldless frame kit a good product? Can I cut the frame with the engine still in?
It could also be your pucks. They leak like nothing else, a real pain. It does look like the head gasket area, it could be both.
Either way once you get down there any of those leaks will be getting fixed up anyway
I already know the pucks are a problem. They are leaking out the 2/3 spark plug area. They've been like that since I got the bike, but just a gentle film on the upper fins.
This is a new leak that started last week, and is much more of a dripping leak. It has soaked my kick starter rubber and pools in the area around the oil pressure switch.
I've also noticed that idle is funny since the leak started. Bounces between 700-1000RPM, dial up to 1100 (prev good setting), rev to be sure... back down to 700-1000 again. Hmph. Good thing winter is coming so I can get to this project.