Author Topic: What did you do to your bike today ? (Read 3260459 times)

Stev-o · « **Reply #20400 on:** August 18, 2015, 09:13:06 PM »

Quote from: Jerry Rxman Griffin aka MuthaF'er on August 18, 2015, 06:58:52 PM

Quote from: Stev-o on August 18, 2015, 03:38:49 PM
Quote from: mrbreeze on August 18, 2015, 12:23:18 PM
I agree with the blue to the gold wheels.

+1. But don't you already have a blue bike?

It's blue if I want it blue Or maybe orange if I'm feeling that

Oh yeah, now I remember, you have two sets of bodywork for the bike that has been through 3 wives!

Jerry Rxman Griffin aka MuthaF'er · « **Reply #20401 on:** August 18, 2015, 10:07:25 PM »

4 sets

and I returned one blue E-bay purchase to W. VA. that was fraudulently advertised as NOS. Gotta have more for the bike than I have ex-wives. 2 blue, 1 orange and the presto red.

Short shins · « **Reply #20402 on:** August 19, 2015, 01:32:34 AM »

Well not today..
Been quite a productive winter break
Before

So after 2 punctures on 2 different trips It was time to roll Ermintrude into the Garage for the Winter tidy up

1st laced up a Gold wing alloy rim and fitted a new Bridgestone BT45, plus new tube and rim tape

Next I had a look at the weeping tank after a bit of sanding and digging I decided all this tank needs is a new tank

The lawn mower fund was looking good after a successful sale of one of my long term projects
I had a look on Ebay. I could not find anything nice and for a good price, I remembered that Wobbly (forum member) had a Tank/side cover set which he was willing to sell for what I considered a good price. A couple of emails later a deal was done.
The lawn mower fund took a hit with the purchase of Headlamp ears (Thanks Guvnors Bridge M/C UK) Indicators, and other bits ex David Silver Spares UK.
So one nice Winters day the sun came out and Erintrude rolled out for a photoshoot

Still to do. Paint the headlight bucket, grips, mirrors, front garnish stay, maybe even a set of pipes, I know Wobbly is keen to see a set on the bike

PeWe · « **Reply #20403 on:** August 20, 2015, 12:45:23 PM »

New tires today. Rear was flat, 1- 0.5mm left, front not in balance. Old tires were Metzeler Laser Tec rear-front. I had higher expectations. Rear worn out before 5000km's! About 4000km.
New tires are Dunlop Arrowmax StreetSmart. Bike feels better when not flat rear.

Terry in Australia · « **Reply #20404 on:** August 21, 2015, 02:53:03 AM »

Yep, I'm not a fan of metzlers either mate, I had 'em on most of my BMW's and I found that they tracked all over the place, slid on wet white lines, followed road contours, and if the road had been "scoured" in preparation for a new layer of bitumen, it was downright dangerous.

I binned them and replaced them with just about anything else, and they were better. Interestingly I've got them on my Trumph Rocket III, and I've had no issues like I've described above. Even with 7000 miles on them, they're only slightly worn, (I was originally told that I'd probably have to replace them at 5000 miles, which is "normal" for Rocket III's) and should be good for a few thousand more. Horses for courses? Cheers, Terry.

PeWe · « **Reply #20405 on:** August 21, 2015, 03:17:36 AM »

The rear tire Metzeler ME99 back in the 80's was good! Good handling, grip. I made about 8000km's with them.

Terry in Australia · « **Reply #20406 on:** August 21, 2015, 03:39:16 AM »

Yep, I'm guessing it really depends on which bike you fit them to Pewe, I had them on my 1979 R100RS, and they were crap. I replaced them with Bridgestone BT45's, and they were excellent. Cheers, Terry.

Stev-o · « **Reply #20407 on:** August 21, 2015, 07:25:30 AM »

Quote from: Terry in Australia on August 21, 2015, 03:39:16 AM

I replaced them with Bridgestone BT45's, and they were excellent.

Have BT45's on my K4, excellent.

Heard a rumor they are stopping production?

evanphi · « **Reply #20408 on:** August 21, 2015, 07:54:56 AM »

A good alternative is the Bridgestone S11 Spitfire. That is what I have on mine.

goldarrow · « **Reply #20409 on:** August 21, 2015, 10:27:30 AM »

Quote from: flybox1 on August 18, 2015, 11:29:58 AM

Blue.
You already have a red rocket there in the garage
..and orange w the gold lesters might not compliment each other.

Here's orange and gold for visual

goldarrow · « **Reply #20410 on:** August 21, 2015, 10:32:22 AM »

Quote from: Gene on August 18, 2015, 08:25:34 PM

Red and Gold . . . could work if you're a USC fan. Might look craZY COOL.

Here are red and gold for visual

jeffg · « **Reply #20411 on:** August 21, 2015, 03:27:51 PM »

Rode my bike,
Its a survivor!
lost all my other bikes, my house, to much stuff to even cry about.
had a bankruptcy
pulled off a house buy with all cash
and rode my lone survivor today.
now I.m probably going to sell it to pay for a certification exam fee.
Oh well by by baby.

seanbarney41 · « **Reply #20412 on:** August 21, 2015, 11:55:05 PM »

Jeff that #$%* sucks. But don't worry too much...just gotta re-up and there are plenty more where that came from.

OldSchool_IsCool · « **Reply #20413 on:** August 22, 2015, 07:06:47 AM »

Quote from: jeffg on August 21, 2015, 03:27:51 PM

Rode my bike,
Its a survivor!
lost all my other bikes, my house, to much stuff to even cry about.
had a bankruptcy
pulled off a house buy with all cash
and rode my lone survivor today.
now I.m probably going to sell it to pay for a certification exam fee.
Oh well by by baby.

Certification exams are such a fvcking ripoff, there only to make $$ for the testing provider and to enable hiring managers slide on doing REAL applicant vetting! I've been in my line of work for about 28 years. I know many a worker who hold the same certifications that I have yet I wouldn't let them near any piece of work I care about! You want to prove to me that you can do the work? Then don't show me sone pimped up piece of paper, SHOW ME YOUR SCARS!

End-rant

Terry in Australia · « **Reply #20414 on:** August 23, 2015, 05:35:57 PM »

'Scuse my ignorance, but what's a certification exam? Don't you guys get a certificate when you finish whatever course it is you do? How much is the fee? Cheers, Terry.

Bobby_B · « **Reply #20415 on:** August 23, 2015, 06:02:04 PM »

Spent two months bringing a 76 cb550f back to life from PO that did many things wrong.. After rebuilding the motor and getting everything back together, today i started it and after about 20 kicks it started up and was running great. Until i noticed oil coming from the alternator cover. After looking around i noticed that there is a hair line crack above crankshaft. Bitter sweet day today. Tomorrow JB Weld.

Terry in Australia · « **Reply #20416 on:** August 23, 2015, 06:08:50 PM »

G'Day Bobby, that's a shame mate, but sounds like you can fix it easy, so pretty much normal for a resto, you gotta expect a few problems on your maiden voyage. I didn't know that the smaller SOHC4's had oil bathed alternators like the CB750 though, I thought they had a seal on that end of the crank? Cheers, Terry.

Bobby_B · « **Reply #20417 on:** August 23, 2015, 06:29:52 PM »

Quote from: Terry in Australia on August 23, 2015, 06:08:50 PM

G'Day Bobby, that's a shame mate, but sounds like you can fix it easy, so pretty much normal for a resto, you gotta expect a few problems on your maiden voyage. I didn't know that the smaller SOHC4's had oil bathed alternators like the CB750 though, I thought they had a seal on that end of the crank? Cheers, Terry.

Well 550 shouldn't be oil bathed hahaha. The oil is seeping out of the crack and filling up the cover. But the motor did start and run so its a good day.

Terry in Australia · « **Reply #20418 on:** August 23, 2015, 07:33:45 PM »

Quote from: Bobby_B on August 23, 2015, 06:29:52 PM

Quote from: Terry in Australia on August 23, 2015, 06:08:50 PM
G'Day Bobby, that's a shame mate, but sounds like you can fix it easy, so pretty much normal for a resto, you gotta expect a few problems on your maiden voyage. I didn't know that the smaller SOHC4's had oil bathed alternators like the CB750 though, I thought they had a seal on that end of the crank? Cheers, Terry.

Oh, OK, so the engine case is cracked? I'm not sure if I get you? Sorry mate, I'm just a poor old grunt..........

Well 550 shouldn't be oil bathed hahaha. The oil is seeping out of the crack and filling up the cover. But the motor did start and run so its a good day.

OldSchool_IsCool · « **Reply #20419 on:** August 24, 2015, 05:54:41 AM »

Quote from: Terry in Australia on August 23, 2015, 05:35:57 PM

'Scuse my ignorance, but what's a certification exam? Don't you guys get a certificate when you finish whatever course it is you do? How much is the fee? Cheers, Terry.

In my profession, a certification exam is about 100 multiple choice (guess) questions with a pass/fail threshold. The questions are on features and functions of the software. There's not a whole lot of real-world questions like, "your database is slow, causing the website to crash, costing your company $1M per hour. What do you do?" So it's a multiple-choice exam in an essay question world!

As for the fee, mine are $250 a shot. My company will cover it, if I pass. Fail and it's my dime! Definitely make for an incentive to study up, but I can't, cuz the database is slow, causing the web site to crash and costing the company $1M an hour....

PeWe · « **Reply #20420 on:** August 24, 2015, 01:28:47 PM »

Yesterday a wonderful trip 140km away from home on really beautiful curvy roads on the countryside, a wonderful landscape. Nice place to eat, drink, coffee. Back home nice too. Slow speed, mostly 50-70 and 70-90kmh. The carbs pilot circuit had to work most of the time when the throttle lift was really low most of the time. 6 other bikes were Victory and similar HD style. Carbs became better.

EXCEPT for the increasing wrist pain that became really bad after 150km in slow speed. I understood that it was time to replace the handle bar. The clubman has wrong angles. Drag bar is much better when I had that style back in the days during long tourings.

Changed bar today. This together with new tires is WOW!! Much better handling and bike control, no pain in my wrists!

joeyvans · « **Reply #20421 on:** August 24, 2015, 02:04:21 PM »

Quote from: PeWe on August 24, 2015, 01:28:47 PM

Drag bar is much better when I had that style back in the days during long tourings.

Changed bar today. This together with new tires is WOW!! Much better handling and bike control, no pain in my wrists!

I am also a big fan of drags (look and function). The only time my wrists hurt from drags on my 550 was after my first 50 miles. And that was after a 5 year layoff from riding ANY bikes.

mkoski · « **Reply #20422 on:** August 27, 2015, 01:01:59 PM »

I stripped her down. Time to move the engine into my house for the rebuild during the cold winter months!

mkoski · « **Reply #20423 on:** August 27, 2015, 01:05:12 PM »

I also wanted to share this with everyone, a short writeup on my RFID ignition system for anyone who wants to replicate it and install it on their CB750.

http://koskoski.com/?p=1

-MJK

Desert-SOHC · « **Reply #20424 on:** August 27, 2015, 01:19:40 PM »

Unfortunately not much.....its been just to frikin hot to ride or work on anything around here.

News:

Author Topic: What did you do to your bike today ? (Read 3260459 times)