« previous next »
Pages: 1 ... 844 845 [846] 847 848 ... 1332   Go Down

Author Topic: What did you do to your bike today ?  (Read 3161516 times)

Biffer and 28 Guests are viewing this topic.

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: What did you do to your bike today ?
« Reply #21125 on: February 17, 2016, 04:28:18 am »
Quote from: Retro Rocket on February 17, 2016, 04:02:55 am
Quote from: kghost on February 17, 2016, 01:11:27 am
I've actually never seen Retro Rocket on a bike......you ever gonna finish and ride one?

Well seeings though I've only ever seen you about 4, maybe 5 times in my life, that really doesn't surprise me, I've never seen you fly a plane either.. You do your thing and i'll do mine... 8)  You got any CB900 F2c parts {boomerang comstars} ..? I need a speedo drive....

I may have very well have flown over your house...so perhaps you have seen me.

By all means do your own thing....didn't really answer the question though did ya?
Logged
Stranger in a strange land

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,492
  • Bike almost back to the 70's 2015
Re: What did you do to your bike today ?
« Reply #21126 on: February 17, 2016, 11:43:23 am »
Opened the cases after work. ("After work" is usually beers, food and women....but not for me)

I got a reminder to NEVER use Hondabond as extra sealer around the oil seals. I'll use athin layer of Hylomar blue next time around theese seals as before.

REAL PITA to remove the upper case when the crank followed and stucked with prim chains. Crank oil seal at ign side and final outgoing axis, crank was stucked in upper case due to the glued by hondabond oil seals.

I had to use brutal force to hammer down the crank, a soft distance between the opened cases made it possible
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,257
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #21127 on: February 17, 2016, 12:17:04 pm »
Ha ha, looking at your pic reminded me that I've got a great workbench under piles of crap that I've never cleaned off in years PeWe, I really must get my garage in some kind of order, I'm picking up my latest CB750 purchase today, and my work bench is big enough to lay the whole bike out on, if I could just expend the energy to clean it up first............ ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,492
  • Bike almost back to the 70's 2015
Re: What did you do to your bike today ?
« Reply #21128 on: February 17, 2016, 01:30:33 pm »
Same here....the workbench was full of junk 2 weeks ago. I removed all stuff so I could do the oil pump restore. It's too easy that the bench and other work areas fills with parts, garbage, tools etc.
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: What did you do to your bike today ?
« Reply #21129 on: February 17, 2016, 01:41:08 pm »
Quote from: kghost on February 17, 2016, 04:28:18 am
Quote from: Retro Rocket on February 17, 2016, 04:02:55 am
Quote from: kghost on February 17, 2016, 01:11:27 am
I've actually never seen Retro Rocket on a bike......you ever gonna finish and ride one?

Well seeings though I've only ever seen you about 4, maybe 5 times in my life, that really doesn't surprise me, I've never seen you fly a plane either.. You do your thing and i'll do mine... 8)  You got any CB900 F2c parts {boomerang comstars} ..? I need a speedo drive....

I may have very well have flown over your house...so perhaps you have seen me.

By all means do your own thing....didn't really answer the question though did ya?

Nope, because it's no one elses business.... ;D
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline hotdog

  • Hot Shot
  • ***
  • Posts: 345
Re: What did you do to your bike today ?
« Reply #21130 on: February 17, 2016, 02:51:29 pm »
Not a cb sohc, but another ongoing project...
It is a sohc....does that help?





















Sent from my HTC_M9u using Tapatalk

Logged
Instagram - LUMPY CAM MOTORCYCLES
FB - LUMPY CAM Motorcycles

Offline Desert-SOHC

  • Expert
  • ****
  • Posts: 1,015
  • It's old
Re: What did you do to your bike today ?
« Reply #21131 on: February 17, 2016, 05:30:36 pm »
Figured out why my neutral light was flickering and then died, LED bulb gave up.  Got some decent used gaskets for the stock fork ears, think I'll do those in the morning.
Logged
90 F350 Lariat CS S/C Dually
90 S&S 11SC Cabover Camper
97 FLHTP (under construction)
11 Ranger S/C 2wd

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,257
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #21132 on: February 18, 2016, 12:16:06 am »
Quote from: hotdog on February 17, 2016, 02:51:29 pm
Not a cb sohc, but another ongoing project...
It is a sohc....does that help?


Yeah yeah, good work mate, nice tools (looks way too clean for my liking though......) but more importantly, what's that bike with the STP sticker on the tank? Post some pics of that sucker, will you? Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,748
  • Northern Virginia
Re: What did you do to your bike today ?
« Reply #21133 on: February 18, 2016, 03:59:12 am »
How do you like those Neway cutters?
Logged

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: What did you do to your bike today ?
« Reply #21134 on: February 18, 2016, 04:46:21 am »
Quote from: Retro Rocket on February 17, 2016, 01:41:08 pm
Quote from: kghost on February 17, 2016, 04:28:18 am
Quote from: Retro Rocket on February 17, 2016, 04:02:55 am
Quote from: kghost on February 17, 2016, 01:11:27 am
I've actually never seen Retro Rocket on a bike......you ever gonna finish and ride one?

Well seeings though I've only ever seen you about 4, maybe 5 times in my life, that really doesn't surprise me, I've never seen you fly a plane either.. You do your thing and i'll do mine... 8)  You got any CB900 F2c parts {boomerang comstars} ..? I need a speedo drive....

I may have very well have flown over your house...so perhaps you have seen me.

By all means do your own thing....didn't really answer the question though did ya?

Nope, because it's no one elses business.... ;D

Maybe you just need some poking, prodding and encouragement......

After all isn't that what community is all about?

Come on....you ever gonna finish?

The Panama Canal only took 10 yrs......

Maybe you're going for the Sydney Opera house....it only took 14 yrs....
Logged
Stranger in a strange land

Offline Mantree

  • Hot Shot
  • ***
  • Posts: 596
Re: What did you do to your bike today ?
« Reply #21135 on: February 18, 2016, 07:56:16 am »
New petcock fuel filter and lines


Sent from my SM-G900V using Tapatalk

Logged

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: What did you do to your bike today ?
« Reply #21136 on: February 18, 2016, 08:45:24 am »
hotdog those things are the most robust engines. Tree trunks for valve stems and studs. They too get hammered though!
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: What did you do to your bike today ?
« Reply #21137 on: February 18, 2016, 12:05:01 pm »
Quote from: kghost on February 18, 2016, 04:46:21 am
Quote from: Retro Rocket on February 17, 2016, 01:41:08 pm
Quote from: kghost on February 17, 2016, 04:28:18 am
Quote from: Retro Rocket on February 17, 2016, 04:02:55 am
Quote from: kghost on February 17, 2016, 01:11:27 am
I've actually never seen Retro Rocket on a bike......you ever gonna finish and ride one?

Well seeings though I've only ever seen you about 4, maybe 5 times in my life, that really doesn't surprise me, I've never seen you fly a plane either.. You do your thing and i'll do mine... 8)  You got any CB900 F2c parts {boomerang comstars} ..? I need a speedo drive....

I may have very well have flown over your house...so perhaps you have seen me.

By all means do your own thing....didn't really answer the question though did ya?

Nope, because it's no one elses business.... ;D

Maybe you just need some poking, prodding and encouragement......

After all isn't that what community is all about?

Come on....you ever gonna finish?

The Panama Canal only took 10 yrs......

Maybe you're going for the Sydney Opera house....it only took 14 yrs....

I need no prodding mate, i'm not rich and its all about priorities. You should drop Mick in Darwin a few words of encouragement, he's been going longer on his silver 750 than me, and he started with a full bike... ;D If you really are interested, I'm currently waiting on some spacers I've ordered so I can finish fitting the wheels  to the 41mm forks I'm using, picked up the axle and bearings last week. You didn't answer my question either, Any Idea where I can get me hands on a speedo drive for a late model 900 boldor or cb1100f, must be for an 18 inch front wheel  ..?
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,081
  • Sunny Central Florida
Re: What did you do to your bike today ?
« Reply #21138 on: February 18, 2016, 03:49:23 pm »
Draped it with some swag that came in the mail today...







 ;)  ;)
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline hotdog

  • Hot Shot
  • ***
  • Posts: 345
Re: What did you do to your bike today ?
« Reply #21139 on: February 18, 2016, 04:22:42 pm »
Quote from: Terry in Australia on February 18, 2016, 12:16:06 am
Quote from: hotdog on February 17, 2016, 02:51:29 pm
Not a cb sohc, but another ongoing project...
It is a sohc....does that help?


Yeah yeah, good work mate, nice tools (looks way too clean for my liking though......) but more importantly, what's that bike with the STP sticker on the tank? Post some pics of that sucker, will you? Cheers, Terry. ;D
Here you go uncle tez, the bastardized child...it's/was an xs650 I built around 5 years ago...
Not for the purists this one. However they might get some comfort knowing the entire bike was scrap worthy prior to this.
Rebuilt engine to standard specs ( not like the other one) but has been rephased to a 277° firing interval instead of the standard 360°, sounds ducati-ish.

Hall effect ignition and vm34 carbs and custom 2-1 pipe. Surprising how fast this little #$%* is....









Sent from my HTC_M9u using Tapatalk

Logged
Instagram - LUMPY CAM MOTORCYCLES
FB - LUMPY CAM Motorcycles

Offline hotdog

  • Hot Shot
  • ***
  • Posts: 345
Re: What did you do to your bike today ?
« Reply #21140 on: February 18, 2016, 04:29:02 pm »
Quote from: 70CB750 on February 18, 2016, 03:59:12 am
How do you like those Neway cutters?
I find them excellent, easy to use and do a great job - if you take your time.
Used to do lots of evo Harley heads with them with great success.
You need to make sure the pilots are a good fit for concentric seats, new pilots can be expensive I just spin my own in the lathe.
Using them infrequently at the moment but will be advertising for work soon at my modest shop, depending of levels of work I get, I may upgrade to a single blade cutter system for my mill.

Regards.

Sent from my HTC_M9u using Tapatalk

Logged
Instagram - LUMPY CAM MOTORCYCLES
FB - LUMPY CAM Motorcycles

Offline hotdog

  • Hot Shot
  • ***
  • Posts: 345
Re: What did you do to your bike today ?
« Reply #21141 on: February 18, 2016, 04:31:08 pm »
Quote from: bwaller on February 18, 2016, 08:45:24 am
hotdog those things are the most robust engines. Tree trunks for valve stems and studs. They too get hammered though!
Yes they are over-engineered, Yamaha's first 4st.
This one's hopped up a bit....

Sent from my HTC_M9u using Tapatalk
« Last Edit: February 18, 2016, 06:08:40 pm by hotdog »
Logged
Instagram - LUMPY CAM MOTORCYCLES
FB - LUMPY CAM Motorcycles

Offline Desert-SOHC

  • Expert
  • ****
  • Posts: 1,015
  • It's old
Re: What did you do to your bike today ?
« Reply #21142 on: February 18, 2016, 06:43:37 pm »
Put on the stock fork ears, badge, and changed the fork oil to Belray 10w.

Logged
90 F350 Lariat CS S/C Dually
90 S&S 11SC Cabover Camper
97 FLHTP (under construction)
11 Ranger S/C 2wd

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: What did you do to your bike today ?
« Reply #21143 on: February 18, 2016, 07:00:51 pm »
Quote from: Retro Rocket on February 18, 2016, 12:05:01 pm
Quote from: kghost on February 18, 2016, 04:46:21 am
Quote from: Retro Rocket on February 17, 2016, 01:41:08 pm
Quote from: kghost on February 17, 2016, 04:28:18 am
Quote from: Retro Rocket on February 17, 2016, 04:02:55 am
Quote from: kghost on February 17, 2016, 01:11:27 am
I've actually never seen Retro Rocket on a bike......you ever gonna finish and ride one?

Well seeings though I've only ever seen you about 4, maybe 5 times in my life, that really doesn't surprise me, I've never seen you fly a plane either.. You do your thing and i'll do mine... 8)  You got any CB900 F2c parts {boomerang comstars} ..? I need a speedo drive....

I may have very well have flown over your house...so perhaps you have seen me.

By all means do your own thing....didn't really answer the question though did ya?

Nope, because it's no one elses business.... ;D

Maybe you just need some poking, prodding and encouragement......

After all isn't that what community is all about?

Come on....you ever gonna finish?

The Panama Canal only took 10 yrs......

Maybe you're going for the Sydney Opera house....it only took 14 yrs....

I need no prodding mate, i'm not rich and its all about priorities. You should drop Mick in Darwin a few words of encouragement, he's been going longer on his silver 750 than me, and he started with a full bike... ;D If you really are interested, I'm currently waiting on some spacers I've ordered so I can finish fitting the wheels  to the 41mm forks I'm using, picked up the axle and bearings last week. You didn't answer my question either, Any Idea where I can get me hands on a speedo drive for a late model 900 boldor or cb1100f, must be for an 18 inch front wheel  ..?

Since I work at a bike shop/wrecker 2 days a week I should probably look huh?

I need some pictures for encouragement......
Logged
Stranger in a strange land

Offline Kenzo

  • Enthusiast
  • **
  • Posts: 244
Re: What did you do to your bike today ?
« Reply #21144 on: February 18, 2016, 09:07:18 pm »
Ditched the chrome shock covers. Shocks felt decent...fast compression, rebound dampened well. Only 14K on the 40 years old shocks. :)


Cheers,
Kenzo

Logged
H-Town, Tejas
>1976 CB550F SuperSport (Work In Progress)
MotoGP Werks Exhaust, Uni Pods
>2006 KTM EXC 453 (EXC 400 w/ Short Stroke Big Bore Kit)

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: What did you do to your bike today ?
« Reply #21145 on: February 18, 2016, 09:24:59 pm »
Quote from: kghost on February 18, 2016, 07:00:51 pm
Quote from: Retro Rocket on February 18, 2016, 12:05:01 pm
Quote from: kghost on February 18, 2016, 04:46:21 am
Quote from: Retro Rocket on February 17, 2016, 01:41:08 pm
Quote from: kghost on February 17, 2016, 04:28:18 am
Quote from: Retro Rocket on February 17, 2016, 04:02:55 am
Quote from: kghost on February 17, 2016, 01:11:27 am
I've actually never seen Retro Rocket on a bike......you ever gonna finish and ride one?

Well seeings though I've only ever seen you about 4, maybe 5 times in my life, that really doesn't surprise me, I've never seen you fly a plane either.. You do your thing and i'll do mine... 8)  You got any CB900 F2c parts {boomerang comstars} ..? I need a speedo drive....

I may have very well have flown over your house...so perhaps you have seen me.

By all means do your own thing....didn't really answer the question though did ya?

Nope, because it's no one elses business.... ;D

Maybe you just need some poking, prodding and encouragement......

After all isn't that what community is all about?

Come on....you ever gonna finish?

The Panama Canal only took 10 yrs......

Maybe you're going for the Sydney Opera house....it only took 14 yrs....

I need no prodding mate, i'm not rich and its all about priorities. You should drop Mick in Darwin a few words of encouragement, he's been going longer on his silver 750 than me, and he started with a full bike... ;D If you really are interested, I'm currently waiting on some spacers I've ordered so I can finish fitting the wheels  to the 41mm forks I'm using, picked up the axle and bearings last week. You didn't answer my question either, Any Idea where I can get me hands on a speedo drive for a late model 900 boldor or cb1100f, must be for an 18 inch front wheel  ..?

Since I work at a bike shop/wrecker 2 days a week I should probably look huh?

I need some pictures for encouragement......

If you could have a look it would be much appreciated, I want to run a stock speedo and the rolladoor speedo drive  is a 2240:60, just like the old Honda. I'll get the son to take some pics, I don't have a camera. {old phone}..
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,257
  • So, what do ya wanna talk about today?
Re: What did you do to your bike today ?
« Reply #21146 on: February 19, 2016, 04:21:05 am »
Quote from: hotdog on February 18, 2016, 04:22:42 pm
Quote from: Terry in Australia on February 18, 2016, 12:16:06 am
Quote from: hotdog on February 17, 2016, 02:51:29 pm
Not a cb sohc, but another ongoing project...
It is a sohc....does that help?


Yeah yeah, good work mate, nice tools (looks way too clean for my liking though......) but more importantly, what's that bike with the STP sticker on the tank? Post some pics of that sucker, will you? Cheers, Terry. ;D
Here you go uncle tez, the bastardized child...it's/was an xs650 I built around 5 years ago...
Not for the purists this one. However they might get some comfort knowing the entire bike was scrap worthy prior to this.
Rebuilt engine to standard specs ( not like the other one) but has been rephased to a 277° firing interval instead of the standard 360°, sounds ducati-ish.

Hall effect ignition and vm34 carbs and custom 2-1 pipe. Surprising how fast this little #$%* is....









Sent from my HTC_M9u using Tapatalk



Ha ha, that is sweet! One bike I've never owned, but I've ridden a couple of Yammy 650's, and they were a great bike, God, I remember them when they were new! I love that bike mate, if you ever get sick of it, send it to me! Cheers, Terry. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline mick7504

  • Old Timer
  • ******
  • Posts: 3,740
Re: What did you do to your bike today ?
« Reply #21147 on: February 19, 2016, 06:48:07 am »
I took a picture  of my crank and Carrillos.
Does that count.  ;D

Logged
If I was you
I'd be worried about me.

Wobbly

  • Guest
Re: What did you do to your bike today ?
« Reply #21148 on: February 19, 2016, 07:14:41 am »
Quote
Any Idea where I can get me hands on a speedo drive for a late model 900 boldor or cb1100f, must be for an 18 inch front wheel  ..?

Attn.: retro rocket

If you find anything on this side of the pond, I can get it for you, mailing it to you with domestic USPS mail.

http://www.ebay.de/sch/i.html?_from=R40&_trksid=p2055119.m570.l1313.TR0.TRC0.H0.Xtachoantrieb+cb900+honda.TRS0&_nkw=tachoantrieb+cb900+honda&_sacat=0
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,492
  • Bike almost back to the 70's 2015
Re: What did you do to your bike today ?
« Reply #21149 on: February 19, 2016, 11:49:17 am »
Quote from: mick7504 on February 19, 2016, 06:48:07 am
I took a picture  of my crank and Carrillos.
Does that count.  ;D



Yes, thats a good start! It has the stamped detail too? Mine is on the way in....

« Last Edit: February 19, 2016, 11:54:51 am by PeWe »
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967
Pages: 1 ... 844 845 [846] 847 848 ... 1332   Go Up
« previous next »