Author Topic: What did you do to your bike today ? (Read 3209341 times)

Greggo · « **Reply #4150 on:** November 28, 2010, 11:39:22 AM »

Bought new 4-2 pipes for her

Think I'll have to re-jet going to this from a 4-1 on my '71 CB500?

famoussas1 · « **Reply #4151 on:** November 28, 2010, 11:59:52 AM »

popped on some new black drag bars on my 74 550. new grips, wrapped my levers in black tape and lettin the hairspray dry now (gonna try it)...gotta grind a little off my gauge bracket but should be good to go, next is fabricating a small luggage type rack for longer trips.

Tintop · « **Reply #4152 on:** November 28, 2010, 06:23:50 PM »

Took the 550 outside, and fired it up for the 1st time in fresh air.

Video in the build thread.

Terry in Australia · « **Reply #4153 on:** November 28, 2010, 06:34:38 PM »

Quote from: Magpie on November 27, 2010, 04:28:54 PM

Put the seat on. Cliff.

That's a nice seat Cliff, I need a K0 seat mate, where'd you get it? Cheers, Terry.

Really? · « **Reply #4154 on:** November 28, 2010, 07:29:38 PM »

Drove it around the block.

going4speed · « **Reply #4155 on:** November 28, 2010, 07:38:53 PM »

Striped down to the frame. Nearly ready for powdercoat. Waiting on a few quotes.

seaweb11 · « **Reply #4156 on:** November 28, 2010, 09:30:08 PM »

I was going to post what I got done yesterday, but my new camera has mysteriously disappeared

Jerry Rxman Griffin aka MuthaF'er · « **Reply #4157 on:** November 28, 2010, 09:35:39 PM »

Quote from: seaweb11 on November 28, 2010, 09:30:08 PM

I was going to post what I got done yesterday, but my new camera has mysteriously disappeared

You shouldn't have turned off the light maybe. At least YOU got something accomplished

socalenduro · « **Reply #4158 on:** November 28, 2010, 11:29:01 PM »

finally installed my cafe ace parts.... what a pita with the internal wires....

tango911 · « **Reply #4159 on:** November 29, 2010, 09:08:21 AM »

pulled forks apart. gotta get some seals and oil.

wardenerd · « **Reply #4160 on:** November 29, 2010, 09:50:16 AM »

rode the 650 to work 30*. Will pick up the 550 this afternoon and get them back under one roof. The 650 also got a new tachometer holder and indicator light box as those were the last damaged parts. I also rubbed the plastic with peanut oil and restored the dark color and actually cleared up th fogged up indicator light cover. amazing

OldSchool_IsCool · « **Reply #4161 on:** December 04, 2010, 02:14:25 PM »

Winterized 2 of the 4 bikes and tucked them into the corner of the garage for their long winter's nap. The other two bikes will each be spending time on the lift this winter.

Come on Spring!!

Really? · « **Reply #4162 on:** December 04, 2010, 02:25:06 PM »

Ordered a rectifier from that Oregon guy. $52 shipped. I would rather plug it in than make one.

http://www.oregonmotorcycleparts.com/rectifiers3p.html

Brown Bomber · « **Reply #4163 on:** December 04, 2010, 03:18:53 PM »

Quote from: TipperT on December 04, 2010, 02:25:06 PM

Ordered a rectifier from that Oregon guy. $52 shipped. I would rather plug it in than make one.

http://www.oregonmotorcycleparts.com/rectifiers3p.html

I bought one from him this summer, good quality.

tango911 · « **Reply #4164 on:** December 04, 2010, 05:55:59 PM »

put the center stand and kick on. wheeled out the fork housings and ready to put the front end back togetha.

going4speed · « **Reply #4165 on:** December 04, 2010, 06:06:11 PM »

Cleaned up the frame and some other parts getting ready for the powder coater.

Tore the motor down to the bottom end. Cleaned many parts and bagged and labeled everything. Everything except one bolt and one nut

Quote from: tango911 on December 04, 2010, 05:55:59 PM

put the center stand and kick on. wheeled out the fork housings and ready to put the front end back togetha.

Grnrngr · « **Reply #4166 on:** December 04, 2010, 10:21:54 PM »

Quote from: TipperT on December 04, 2010, 02:25:06 PM

Ordered a rectifier from that Oregon guy. $52 shipped. I would rather plug it in than make one.

http://www.oregonmotorcycleparts.com/rectifiers3p.html

I bought some other electric stuff from him last summer, he's local so I saved shipping and got to meet him. Nice Guy...

dave500 · « **Reply #4167 on:** December 04, 2010, 11:32:57 PM »

had a play with the new 500,between rain,its non stop now for two days,placed an order with david silvers,he should be able to retire after this one!

dreamed of it finished

cut the spokes out of both rims

and dropped a few parts into the mollasses tub,ill post an after shot of this battery cradle

one week in mollasses and a quick scrub over,ill dunk it again for another week

Tintop · « **Reply #4168 on:** December 05, 2010, 05:39:58 PM »

Finished the hookup of my rear brake cable setup on the 550. Also received my new filter and did a trial fitting. This is going to work great.

Stev-o · « **Reply #4169 on:** December 05, 2010, 05:47:15 PM »

Charged the battery so I could start it. Then took it for a ride on a beautiful fall day.
I may need to get a new battery.

CycleRanger · « **Reply #4170 on:** December 05, 2010, 06:36:18 PM »

Quote from: Stev-O on December 05, 2010, 05:47:15 PM

I may need to get a new battery.

Nah, you just need to ride it more!

Stev-o · « **Reply #4171 on:** December 05, 2010, 07:19:04 PM »

Quote from: CycleRanger on December 05, 2010, 06:36:18 PM

Quote from: Stev-O on December 05, 2010, 05:47:15 PM
I may need to get a new battery.

Nah, you just need to ride it more!

So true! I try to at least one a week, but doesn't always happen.

Trav-i · « **Reply #4172 on:** December 05, 2010, 07:24:27 PM »

Today I started making the to do list on my 78 SS. So far I have about a half a dozen things to do before I get to riding it. Most of it is just tune related stuff, a couple of oil seals to change, clean the fuel tank, and put on a new rear tire. I can't wait to start riding it.

seaweb11 · « **Reply #4173 on:** December 05, 2010, 10:23:15 PM »

Cleaned and painted a few more parts off of the GS1100.

Zaipai · « **Reply #4174 on:** December 06, 2010, 06:52:07 PM »

Cleaned up the GS1000 and put the carbs back on. Started it up and she ran like a champ until the little gas that was left in the tank ran out. Tomorrow I fill the tank back up and give it a nother go with the air filter on.

Started and sat on the CB550F because it was 9 degrees out side.. sigh..

.: Scott :.

News:

Author Topic: What did you do to your bike today ? (Read 3209341 times)