Topic: Fuel IV

[Beans]

OK so was messing with the bike and well got mad the gas tank was always in my way when I wanted to tune the carbs.  so I made a fuel IV with some common stuff I had lying around.  theirs 5 things you need and most of you have them in your garage.


1.Lawn mower gas can.   the one or 2 gallon one is what I used.
2. Old cb petcock.
3. fuel line.  clean is my choice so I can see if gas is flowing.
4. 5 minute epoxy.  
5.  zip tie, string or bungee cord to hand it above the bike.


OK so I took my lawn mower can and drilled a whole just big enough to put the petcock made up some 5 minute epoxy to hold it all in. added the fuel lines and hung it from my garage door with a bungee cord.   works great and I can still use it for my lawn mower if I choose too.  here are some pics I took after I built it.








Hope this helps someone in the future during their build.

[wannabridin]

gotta love the home made mods!  great job, i might be using a similar setup to bench tune my motor and break it in...  either way, nicely done!!

[Toxic]

shortly after seein this, my neighbor was throwing out a LawnBoy.
The gas tank is in perfect shape and the fuel outlet looks like it is the correct size.

Good score.