Author Topic: 1972 CB350 K4 Parts List Manual  (Read 5467 times)

0 Members and 1 Guest are viewing this topic.

jack1980

  • Guest
1972 CB350 K4 Parts List Manual
« on: November 13, 2009, 09:12:08 am »
Does anyone have or can lead me to a pdf copy or hardcopy of a Parts list manual for the Cb350 Twins?  More specifically the K4 twin.

I can find shop manuals left and right but not an actual parts list.

Any help would be greatly appreciated!
Thanks

Offline old76cr

  • Enthusiast
  • **
  • Posts: 179
cb750 k5                                                                     76 Husqvarna 250cr                                                       77 Can-Am 175   1973 honda SL125

jack1980

  • Guest
Re: 1972 CB350 K4 Parts List Manual
« Reply #2 on: November 16, 2009, 11:10:35 am »
I appreciate the help! 

But I'm looking for an actual hardcopy, or electronic copy I can print out to have in the shop.  It's nice to have the full size page for the dwgs and parts list.

Offline TomC

  • Hot Shot
  • ***
  • Posts: 325
Re: 1972 CB350 K4 Parts List Manual
« Reply #3 on: November 16, 2009, 04:06:24 pm »
Hi Jack1980
     This does seem to be a problem. I have been looking for one too. I can find a number of links to CB350 Four Honda Parts Lists that can be down loaded. But so far nothing for the twins.
          TomC in Ohio
I appreciate the help! 

But I'm looking for an actual hardcopy, or electronic copy I can print out to have in the shop.  It's nice to have the full size page for the dwgs and parts list.
TomC in Ohio
76 CB750 F1 Daily Rider
76 CB550 stalled project
76 CB400F Injured Reserve

Offline mick7504

  • Old Timer
  • ******
  • Posts: 3,740
Re: 1972 CB350 K4 Parts List Manual
« Reply #4 on: November 16, 2009, 07:44:27 pm »
Here is a link to another site which may be of some help.
Between this site and the CMSNL site is probably the best you can do for now.

http://www.hdlparts.com/fiche_select2.asp?category=Motorcycles&make=Honda&year=1972&fveh=2905

You can right click on the images and then save them to a folder and the part numbers can be highlighted and copied and pasted into a folder as well.
It's a bit of work but sometimes it is the only way.
If I was you
I'd be worried about me.