Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 619048 times)

Old Scrambler · « **Reply #4300 on:** May 22, 2014, 03:04:54 PM »

The napkin is precious............

jweeks · « **Reply #4301 on:** May 22, 2014, 06:58:52 PM »

Too cheap for a quarter fairing. Next best thing (smaller than Sam's head) is having the tach break the wind....

dragracer · « **Reply #4302 on:** May 22, 2014, 08:36:43 PM »

Is everybody ready to race in Virginia next month??? We've only got about 30 days left for preparation. Heck, I'm so far behind on maintenance it's a crime. Billy, do you have a good 77/78 F model tranny in your parts stash on case I need one???

Sam Green Racing · « **Reply #4303 on:** May 23, 2014, 03:06:30 AM »

Napkin is in the bin, the final rendering,

Bill/BentON Racing · « **Reply #4304 on:** May 23, 2014, 04:14:17 AM »

Too cool! 55+ one needs big gauge with big numbers!

J.T. Awesome!

Bill

dusterdude · « **Reply #4305 on:** May 23, 2014, 11:15:38 AM »

Now thats funny

Sent from my iPhone using Tapatalk

Bill/BentON Racing · « **Reply #4306 on:** May 23, 2014, 01:33:50 PM »

Quote from: dragracer on May 22, 2014, 08:36:43 PM

Is everybody ready to race in Virginia next month??? We've only got about 30 days left for preparation. Heck, I'm so far behind on maintenance it's a crime. Billy, do you have a good 77/78 F model tranny in your parts stash on case I need one???

For you, find me a Kaw big bore kit yet? Trade.......? Ready, yeh, I charged Samauto battery, detuned it after seeing JT's pic, Haha! He might not be able to handle dem 11's!

jweeks · « **Reply #4307 on:** May 24, 2014, 03:59:38 PM »

Quote from: dragracer on May 22, 2014, 08:36:43 PM

Is everybody ready to race in Virginia next month??? We've only got about 30 days left for preparation. Heck, I'm so far behind on maintenance it's a crime. Billy, do you have a good 77/78 F model tranny in your parts stash on case I need one???

I just found out that I need intake valve pockets to go with the exhaust valve pockets that I got done on the last trip to the machine shop. The first trip started with machining the rod pocket on the bottom of the CBX pistons so the rods would fit. CBX rods taper at the top. With a stock K cam, the valves cleared with a stock head. I'm now using a ported head that may have had some milling done. With the 295 cam, the intake valve hits now. I'll be at this up to the last minute it looks like.

Sam Green Racing · « **Reply #4308 on:** May 24, 2014, 04:54:33 PM »

Good luck Jon boy, you have to make it.

Sam.

Bill/BentON Racing · « **Reply #4309 on:** May 24, 2014, 07:53:11 PM »

If all else fails.....it won't! You can do it! Samauto went from 836cc on a Sunday night to a 915 on the dyno on that Friday morning! And that was after doing the bottom end Sat and Sun.When we saw 87.07 rwhp.....it was worth it!

when you in staging next to the " one and only " Sam Green, it'll all be worth it, where the arrow points will be up to you and Sam! Sam will be leaving first! Haha! K. Bill
You need anything let me know...I got a dremel tool!

Bill/BentON Racing · « **Reply #4310 on:** May 24, 2014, 09:40:22 PM »

I wish I was working on " my" race bike! But at least this ones about done! Nice K0 with 27,399 miles. Been sitting for 15-20 years.Before and now, not quite done yet.

Bill/BentON Racing · « **Reply #4311 on:** June 01, 2014, 04:43:19 PM »

Man, I been busy getting ready for Va race. I didn't forget about the trailer though. Put on TWO of these!

kmb69 · « **Reply #4312 on:** June 01, 2014, 05:29:10 PM »

Um......the trailer. Does it have a new axel and wheels?

Sam Green Racing · « **Reply #4313 on:** June 01, 2014, 05:31:54 PM »

I think that should be, TWO AXELS and WHEELS,

Sam.

Bill/BentON Racing · « **Reply #4314 on:** June 01, 2014, 06:19:31 PM »

Axle and tires...maybe yes! And bearings repacked. No axels, no tyres!Two spares, both flat tread auto tires like we put on down there....it's z best I can do!

The tire we put on in Valdosta showed no wear after trip home, other axles and wheels got sold!

Bill

Fastbike · « **Reply #4315 on:** June 01, 2014, 07:25:35 PM »

Bill, you'd better keep it below 60mph!

Hope you guys do good. I am sure I will not make it to Virginie. Somthing to do with money and conflicting schedules. Would like to improve on the points, though. Currently 9th in SuperComp. Oh well, there is Atlanta and the second Valdosta Race. Good luck Sam and Bill.

Sam Green Racing · « **Reply #4316 on:** June 02, 2014, 03:56:31 AM »

Thanks Dave, we'll make it one way or another.

Sam.

Bill/BentON Racing · « **Reply #4317 on:** June 02, 2014, 04:31:17 AM »

Yes we will!

Dave you win @ Commerce that weekend and keep that points lead, we'll do the best we can, Bill

dragracer · « **Reply #4318 on:** June 02, 2014, 02:20:35 PM »

Still haven't touched mine. Last minute thrash as usual I suppose. We'll have an instrument to play with the band one way or the other at VMP.

Bill/BentON Racing · « **Reply #4319 on:** June 02, 2014, 02:35:38 PM »

I resemble that remark....why's it always this way? Jon's cylinder went to shop for bore job today!! We'll make it somehow! K.

Bill

dragracer · « **Reply #4320 on:** June 03, 2014, 08:53:51 AM »

Bill,
Both your bikes ready
??

Bill/BentON Racing · « **Reply #4321 on:** June 03, 2014, 12:35:58 PM »

Haha......haha. You funny! I been working..... They will be! Trying to take Calendar Girl to Commerce Friday night for a little test and tune!

Sam Green Racing · « **Reply #4322 on:** June 03, 2014, 01:05:42 PM »

How are we for race fuel Billy ? seem to remember not a lot left.

Sam.

Bill/BentON Racing · « **Reply #4323 on:** June 03, 2014, 02:02:39 PM »

Time to buy 5 gallons, $130.00! Ouch!

Sam Green Racing · « **Reply #4324 on:** June 03, 2014, 03:14:36 PM »

I'll reimburse you or do you want me to paypal it ?

Sam.

News:

Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 619048 times)