Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 620663 times)

Sam Green Racing · « **Reply #75 on:** June 24, 2010, 01:08:04 AM »

7 months have passed and things are moving on, CycleX have dispatched a drum to disc conversion for the rear brake with twin calipers to make sure the auto dosen't creep forward when the power is wound on in the staging beams. http://www.cyclexchange.net/index%20pics/Diskconver4.JPG
A few other parts are needed such as clip ons, footrest and an oil cooling system so as to be in place for when I arrive in Boston on the 3rd August to start the build.
I hope Ken's new shipping manager is up to speed when I place the order for the remaining bits.

Sam.

Retro Rocket · « **Reply #76 on:** June 24, 2010, 04:35:34 AM »

Any pics yet Sam? What are you running for wheels?

Mick

Sam Green Racing · « **Reply #77 on:** June 24, 2010, 05:00:07 AM »

Quote from: andy750 on April 10, 2010, 05:27:13 PM

So today Mike (MRieck) opened up Sams engine....lots of oil

Afterwards...

Now how to put it all back together!

Andy

Not since the ones that Andy posted of it strewn all over one of Mike's work benches. Hope he remembers how it came apart.

Mike is just starting his school hols so may have time to post some progress.

I'm using the stock aloys with wire spokes to make it roll, the motor should make it rock and roll.

Sam.

Sam Green Racing · « **Reply #78 on:** June 24, 2010, 05:02:07 AM »

I hope he didn't throw the oil out, it'd only done a few thou.

Sam.

Bill/BentON Racing · « **Reply #79 on:** June 24, 2010, 06:25:55 PM »

Sam,AMA Dragbike ceases to exist as of today. Bummer!!!!! I hope you still want to go RACING!! I do! Maybe someone will pick up the series.Damn'it Gumby I'm PO'd.

Bill

KB02 · « **Reply #80 on:** June 25, 2010, 04:44:19 AM »

The AMA was, at one point, looking to sell all of it's racing interests to NASCAR. Not sure wheat ever happened to that.

Sam Green Racing · « **Reply #81 on:** June 26, 2010, 08:56:44 AM »

Quote from: bellcow54 on June 24, 2010, 06:25:55 PM

Sam,AMA Dragbike ceases to exist as of today. Bummer!!!!! I hope you still want to go RACING!! I do! Maybe someone will pick up the series.Damn'it Gumby I'm PO'd. Bill

Don't worry Billy, I'll look at options on Monday and get back to you, sad news all the same

Sam.

bwaller · « **Reply #82 on:** June 26, 2010, 10:25:49 AM »

Too bad. Hopefully something positive comes of it.

I've almost completely lost interest in American roadracing or what's left of it, isn't this run by Nascar now?

I remember back in the seventies here in Canada the CMA just about ruined Canadian racing.

Sam Green Racing · « **Reply #83 on:** June 27, 2010, 11:11:45 PM »

Hey guys, It's not the AMA that's to blame, they only sanction the series and provide insurance.
The people that run the events have been doing a great job but due to the economic down turn over the last two years, they have got to the stage where they will start loosing money if they carry on.
Entry fees to race are very reasonable but due to the fact that the 8 events are spread over a very large area, a lot of competitors can't travel to all of them due to the so called (in the US) high cost of gas.
Even I was only planning on doing the southern rounds because of it.

Sam.

Sam Green Racing · « **Reply #84 on:** July 01, 2010, 08:54:15 AM »

Mike just posted this and it seems to have vanished.

Sam asked me to post some pics of the drum to disc conversion from CycleX. It is certainly stout but weighs a ton, but on the plus side, it's dead in the centre of the tyres footprint where it might be needed.

MRieck · « **Reply #85 on:** July 01, 2010, 09:30:19 AM »

Some pics of Sam's drum to disc conversion. It's stout but heavy.

Sam Green Racing · « **Reply #86 on:** July 01, 2010, 09:40:28 AM »

Quote from: MRieck on July 01, 2010, 09:25:17 AM

Quote from: SamCB750A on July 01, 2010, 08:54:15 AM
Mike just posted this and it seems to have vanished.

Sam asked me to post some pics of the drum to disc conversion from CycleX. It is certainly stout but weighs a ton, but on the plus side, it's dead in the centre of the tyres footprint where it might be needed.
Because this Mac computer is total BS when it comes to posting pics Sam. Clayton just got home...I'll try again.

Don't go blaming the computer, stick to doing what you do best and leave the techy stuff to the children like I do with Ben

Nice pics Clayton, see ya soon.

Sam.

bwaller · « **Reply #87 on:** July 01, 2010, 10:00:20 AM »

Looks like you're planning to make some heavy forward thrust to need such a binder in the rear!

Quite a lump of braking power there Sam, should be cool.

Mike I wonder if Clayton would rent himself out for a few hours? We're in need of someone..........well younger to solve some electronic woes!

Sam Green Racing · « **Reply #88 on:** July 01, 2010, 10:08:28 AM »

Hey Brent, don't go drinking to much tonight but have a good one, happy Canada day.

My love to Debs, Sam.

Sam Green Racing · « **Reply #89 on:** July 02, 2010, 08:10:36 AM »

Quote from: MRieck on July 01, 2010, 09:30:19 AM

Some pics of Sam's drum to disc conversion. It's stout but heavy.

Take a look at this Mike, from the same company, thought I'd heard the name as well now that I've seen it.

http://www.pmfronline.com/rear_brake_components.php

Sam.

Sam Green Racing · « **Reply #90 on:** July 29, 2010, 09:32:26 AM »

I hope this bike will be super consistent when it's done, I've just chalenged Walter Sprout to a grudge race.

Walt nearest the camera.

Seb Domingo in the far lane.

Sam.

bwaller · « **Reply #91 on:** July 29, 2010, 10:07:03 AM »

That's it Sam...jump in with both feet!

Sam Green Racing · « **Reply #92 on:** July 30, 2010, 08:02:55 AM »

He's a mate Brent, top bloke to boot.

Sam.

Sam Green Racing · « **Reply #93 on:** July 30, 2010, 08:08:11 AM »

he's accepted, oh $hit, better get some practice in on the lights.

Sam.

Bill/BentON Racing · « **Reply #94 on:** July 30, 2010, 04:21:32 PM »

Yeah,A 2 second 60 won't get it!

......Valdosta Nov. 2009....that's right, I forgot bike was slow

Mike's already hidden the good stuff....said you got to earn it working on CB750A! We want update and PICS!!!

,Bill

Sam Green Racing · « **Reply #95 on:** August 04, 2010, 04:35:49 PM »

Hey Billy, we're down to bare frame, forks and wheels, time to start building.
Clipons and oil filter/cooler addapter arrived today.
Mike started to build the motor, has anyone seen a stage 12 head.

Sam.

bwaller · « **Reply #96 on:** August 04, 2010, 05:28:27 PM »

Stage 12....aka Peterbilt ports?

andy750 · « **Reply #97 on:** August 04, 2010, 05:52:17 PM »

Ill be around on Saturday to make sure you are making progress Sam

welcome back!
cheers
Andy

Bill/BentON Racing · « **Reply #98 on:** August 05, 2010, 03:10:52 AM »

K! Sam,glad to know you arrived safe.Stage 12 huh? WOW! Andy,make sure and crack the whip,all he's been doing is riding in a chair so he should be plenty rested up and ready to spin some wrenches! Pics Sam!!Good Luck,Bill.........MR,Thanks!

Sam Green Racing · « **Reply #99 on:** August 07, 2010, 12:08:48 PM »

Today I've been getting the RC swingarm modified to fit. The guy doing the job was responsable for the 1000cc billet blocks.
While he was making new bushes, the machine that made the blocks was making spare parts for itself.

Sam.

News:

Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 620663 times)