Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 631201 times)

Sam Green Racing · « **Reply #575 on:** February 28, 2011, 08:32:13 AM »

Not being a techy, I haven't a clue what your talking about

We are in your hands

Sam.

Bill/BentON Racing · « **Reply #576 on:** March 01, 2011, 05:58:25 AM »

It means the video from Sunday is in cyberspace!

Damn,it was a good one,but I believe Big Jim has got it down now.

More tomorrow evening,PROMISE!,Bill

Sam Green Racing · « **Reply #577 on:** March 01, 2011, 06:17:36 AM »

dragracer · « **Reply #578 on:** March 01, 2011, 08:51:59 PM »

Dang it fellas, didn't i tell you we should all chip in and buy Bill a camera about 22 pages back-lol. One with video capabilities would have been best. Now we have to wait. Again!!!!

Well, i'll just wait to see the bike in person in about 10 days.

Sam Green Racing · « **Reply #579 on:** March 01, 2011, 10:13:37 PM »

I seem to remember you did Frank

It's count down time now

Sam.

Bill/BentON Racing · « **Reply #580 on:** March 02, 2011, 02:34:38 PM »

Sam,Mike,Jon and all the rest of you,I rode it.Jim has video,here it comes.Time to pull carbs and install return spring,etc.Pingel petcock came in while we were testing. 8)Bill(thanks Jim) Jim has to go home and download ,send to me and then we all pray we can post!

,Bill

Sam Green Racing · « **Reply #581 on:** March 02, 2011, 03:36:36 PM »

Did it frighten you.

Sam.

P.S. would Mark stop locking this thread

we've been waiting ages for this video.

Bill/BentON Racing · « **Reply #582 on:** March 02, 2011, 04:56:29 PM »

I'm still shaking!

I think it'll run quicker and faster than last time.

I think the rear brake will more than do the job.
F/brake lever feel awesome,old NOS b/pads felt glazed.
Would like better pads!
No fluid leaks....anywhere,way to go Mike.
Jim took tank and petcock to machine adapter.
Oil pressure fine,50-60 @ idle,70-80 when revved.
Needs oil changed and plugs checked/replaced.
Bike feels light,need to weigh it.
C'mon Jim,it's time!

,Bill

Jim F · « **Reply #583 on:** March 02, 2011, 05:43:05 PM »

down loading video as I type this
then it goes to bills to put in to photo shop
hopefully it can be posted
video not so great as it was done with my smart phone but you will get the idea

Jim

scottly · « **Reply #584 on:** March 02, 2011, 05:55:16 PM »

I waited anxiously 2 weekends ago, then again last weekend. Jim, you're killing me with the suspense!!

popslady · « **Reply #585 on:** March 02, 2011, 06:17:34 PM »

Bring this BIKE or any HONDAMATIC to THUNDER IN THE VALLEY race at BRISTOL, TENN. Promotor just said on DRAGBIKE.COM Hondamatic's can run in STREET ET. Real test for your weather stations = up to 3800'......... better bring jets or a DIAL-A-JET system, got some dial-a-jet kits for a few bikes and they were invented by a college graduated of " THE OHIO STATE UNIVERSITY " my home town. He also invented LEAK PROOF FORK SEALS sold both inventions for big bucks $$$$$$$$$$.

POPS BK911 ST/ET NHRA
Suzuki also had a 450 Automatic......... 1982-83

Bill/BentON Racing · « **Reply #586 on:** March 02, 2011, 06:27:39 PM »

Quote from: scottly on March 02, 2011, 05:55:16 PM

I waited anxiously 2 weekends ago, then again last weekend. Jim, you're killing me with the suspense!!

No more suspense! Samauto runs! Living proof

Hope you enjoy,been a lot of blood,sweat,tears

,Ok hard work and $$$.Bill Click on the picture,should take you to photobucket video.

Jim F · « **Reply #587 on:** March 02, 2011, 06:29:28 PM »

More to come guys

good job bill

Jim

scottly · « **Reply #588 on:** March 02, 2011, 06:37:11 PM »

THANKS!!!

Old Scrambler · « **Reply #589 on:** March 02, 2011, 06:44:13 PM »

Congrats everyone............!!! You could put a lot of miles on before Sam shows up......you know........break in the tires and set the rings! I love the tail light!

Bill/BentON Racing · « **Reply #590 on:** March 02, 2011, 06:57:59 PM »

The start of Samauto Take Two!

Remember click on the pic.Bill

Jim F · « **Reply #591 on:** March 02, 2011, 07:03:21 PM »

Quote from: bellcow54 on March 02, 2011, 06:57:59 PM

The start of Samauto Take Two! Remember click on the pic.Bill

glad I don't make my living shooting videos

oh well

Bill/BentON Racing · « **Reply #592 on:** March 02, 2011, 08:49:32 PM »

Yes Sir!

You mean it don't sound quite right? It will!

,Bill

Sam Green Racing · « **Reply #593 on:** March 03, 2011, 12:17:53 AM »

Quote from: bellcow54 on March 02, 2011, 04:56:29 PM

I'm still shaking! I think it'll run quicker and faster than last time.
I think the rear brake will more than do the job.
F/brake lever feel awesome,old NOS b/pads felt glazed.
Would like better pads!
No fluid leaks....anywhere,way to go Mike.
Jim took tank and petcock to machine adapter.
Oil pressure fine,50-60 @ idle,70-80 when revved.
Needs oil changed and plugs checked/replaced.
Bike feels light,need to weigh it.
C'mon Jim,it's time! ,Bill

When you stop shaking, put the tank on and weight it.

ya need a steady hand.

Cool vid but it's a noisy MF.

Sam.

Sam Green Racing · « **Reply #594 on:** March 03, 2011, 12:22:43 AM »

Quote from: big-jim on March 02, 2011, 05:43:05 PM

down loading video as I type this
then it goes to bills to put in to photo shop
hopefully it can be posted
video not so great as it was done with my smart phone but you will get the idea

Jim

Sounds smart enough to me.

Sam.

Sam Green Racing · « **Reply #595 on:** March 03, 2011, 12:24:15 AM »

Quote from: scottly on March 02, 2011, 05:55:16 PM

I waited anxiously 2 weekends ago, then again last weekend. Jim, you're killing me with the suspense!!

Hope he didn't kill you before you saw it.

Sam.

Sam Green Racing · « **Reply #596 on:** March 03, 2011, 12:26:56 AM »

Quote from: Old Scrambler on March 02, 2011, 06:44:13 PM

Congrats everyone............!!! You could put a lot of miles on before Sam shows up......you know........break in the tires and set the rings! I love the tail light!

Tail light is real old school Dennis, I got it from some old guy up north.

Thanks Sam.

Sam Green Racing · « **Reply #597 on:** March 03, 2011, 12:35:53 AM »

Quote from: popslady on March 02, 2011, 06:17:34 PM

Bring this BIKE or any HONDAMATIC to THUNDER IN THE VALLEY race at BRISTOL, TENN. Promotor just said on DRAGBIKE.COM Hondamatic's can run in STREET ET. Real test for your weather stations = up to 3800'......... better bring jets or a DIAL-A-JET system, got some dial-a-jet kits for a few bikes and they were invented by a college graduated of " THE OHIO STATE UNIVERSITY " my home town. He also invented LEAK PROOF FORK SEALS sold both inventions for big bucks $$$$$$$$$$.

POPS BK911 ST/ET NHRA
Suzuki also had a 450 Automatic......... 1982-83

Hi Rich, I think Jon may have a dial a jet system or something similar, We'll have to wait see.
Perhaps Billy will bring it up to Bristol in the summer, we just need to get it all sorted first.

Sam.

Bill/BentON Racing · « **Reply #598 on:** March 03, 2011, 02:35:18 AM »

The first road trip with no Sam?

Big Jim and I talked about trying to make Bristol.Bill
Let's get it right first.

Sam Green Racing · « **Reply #599 on:** March 03, 2011, 03:27:06 AM »

Quote from: MRieck on March 02, 2011, 07:27:48 PM

Get that thing running on all four.

Sounded like it was on 4 then 3 then 2 and then 1 and then none, could it have anything to do with not having a gat tank on it.

Sam.

News:

Author Topic: CB750A Street ET bracket drag bike. A year to build it. (Read 631201 times)