« previous next »
Pages: [1]   Go Down

Author Topic: I want these bars!  (Read 2853 times)

0 Members and 1 Guest are viewing this topic.

Offline BigBoi

  • Enthusiast
  • **
  • Posts: 239
  • It's a jungle out there.
I want these bars!
« on: December 12, 2009, 10:19:36 AM »
Can anyone tell me what they are/where I can get them?! I'd like the identical ones...love the look:


(Good vid too! Although I'm sure you've all seen it...)

Cheers,
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: I want these bars!
« Reply #1 on: December 12, 2009, 10:34:45 AM »
Those are superbike bars.  You should be able to pick them up locally at most motorcycle accessory stores.  If not they're definitely available at a lot of online shops.
Logged

Offline mcpuffett

  • Master
  • *****
  • Posts: 2,354
Re: I want these bars!
« Reply #2 on: December 12, 2009, 01:13:30 PM »
They are uk spec handlebars if you want genuine Honda ones you could try David silver spares here in the UK or Cmsnl in the Netherlands  ;) cheers Mick.
Logged
Honda CB750 KO 1970,   Honda VTX 1300 2006, Lancaster England.

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
Re: I want these bars!
« Reply #3 on: December 12, 2009, 01:44:23 PM »
those are the bars i have on my k4 750, i went to those from a set of 10 degree tomaselli clip ons, then a set of the laverda adjustable clubmans. they allow me to ride for more than 45 minutes or so at a time and still be able to walk upright after a ride. it took a few miles to get used to not crouching over like a monkey guarding his nuts, but the extra length of these bars over the clip ons or laverda adjustable clubmans makes for better leverage, MUCH easier sitting position too. it also doesnt look too odd having the airtech cr750 styled seat and viper fairing and best of all i can spend hours on the bike and still be able to move later that day.
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894

Offline ironbutter

  • Enthusiast
  • **
  • Posts: 113
  • 1971 CB750 K1 ~ JDM ~ Polynesian Blue ~ 8K mi
Re: I want these bars!
« Reply #4 on: December 12, 2009, 01:53:08 PM »
Nice bars.... so would those be different than JDM bars?
« Last Edit: June 24, 2010, 10:42:16 PM by ironbutter »
Logged
"Most motorcycle problems are caused by the nut that connects the handlebars to the saddle."

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,235
  • ROCK & ROLL
Re: I want these bars!
« Reply #5 on: December 12, 2009, 04:36:55 PM »
IMO these are the best bars for the old Honda's, i have had these on all my old 4's and have a set for my latest build, comfortable yet still sporty... ;)

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Hinomaru

  • Guest
Re: I want these bars!
« Reply #6 on: December 12, 2009, 07:57:02 PM »
Quote from: BigBoi on December 12, 2009, 10:19:36 AM
Can anyone tell me what they are/where I can get them?! I'd like the identical ones...love the look:

If your looking for the real thing ... The Honda part number is: 53100-300-610 and those bars were used on the CB750K models found in England, Germany, France, Netherlands and European Direct bikes.

That part number does not show up in the North American or JDM CB750K parts books.

Logged

Offline BigBoi

  • Enthusiast
  • **
  • Posts: 239
  • It's a jungle out there.
Re: I want these bars!
« Reply #7 on: December 13, 2009, 10:45:25 AM »
Quote from: bucky katt on December 12, 2009, 01:44:23 PM
those are the bars i have on my k4 750, i went to those from a set of 10 degree tomaselli clip ons, then a set of the laverda adjustable clubmans. they allow me to ride for more than 45 minutes or so at a time and still be able to walk upright after a ride. it took a few miles to get used to not crouching over like a monkey guarding his nuts, but the extra length of these bars over the clip ons or laverda adjustable clubmans makes for better leverage, MUCH easier sitting position too. it also doesnt look too odd having the airtech cr750 styled seat and viper fairing and best of all i can spend hours on the bike and still be able to move later that day.

Thanks for the info. Where did you pick them up?
Logged

Offline BigBoi

  • Enthusiast
  • **
  • Posts: 239
  • It's a jungle out there.
Re: I want these bars!
« Reply #8 on: December 13, 2009, 10:47:58 AM »
Quote from: retro rocket on December 12, 2009, 04:36:55 PM
IMO these are the best bars for the old Honda's, i have had these on all my old 4's and have a set for my latest build, comfortable yet still sporty... ;)

Mick

Mick...where do you always get them?
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,050
Re: I want these bars!
« Reply #9 on: December 13, 2009, 10:56:48 AM »
 K & N superbike bars, were made in black and shiny chrome.

 BMW lo rise bars, maybe came on R69 or Euro models.

 Honda 400-4 bars, certain years

 Early small Hondas, caution, may be narrower OAWidth
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline jhasewhite

  • Enthusiast
  • **
  • Posts: 137
  • my best vacation is your worst nightmare
Re: I want these bars!
« Reply #10 on: December 13, 2009, 11:18:12 AM »
Rizoma aluminum superbike bars are awesome on a cb750....


..so are flat track bars.
Logged
slow and steady does nothing.

Offline nippon

  • Hot Shot
  • ***
  • Posts: 570
    • Classic Cycle City
Re: I want these bars!
« Reply #11 on: December 13, 2009, 12:32:10 PM »
You cannot get the Honda European model bars from Honda anymore.
Search eBay Germany for "Fehling" handlebars, they come very close to the European CB750 bars.

nippon
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,235
  • ROCK & ROLL
Re: I want these bars!
« Reply #12 on: December 13, 2009, 02:58:22 PM »
Quote from: BigBoi on December 13, 2009, 10:47:58 AM
Quote from: retro rocket on December 12, 2009, 04:36:55 PM
IMO these are the best bars for the old Honda's, i have had these on all my old 4's and have a set for my latest build, comfortable yet still sporty... ;)

Mick

Mick...where do you always get them?

To be honest, where ever i can. In the 80's i use to buy RD and RZ 250 Yamaha bars as they were the same, i have done several searches over the last 12 months and there seems to be plenty of places in the US that sell them. Just google "super bike bars" and there are heaps of links just like this one.

http://www.sideroadcycles.com/ImportedMotorcycles/ImportHandlebars/ImportCafe/78ClubmanCafe.html

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.
Pages: [1]   Go Up
« previous next »