Author Topic: Frame mod cb 750 (Read 75589 times)

754 · « **Reply #175 on:** December 26, 2013, 09:39:32 pm »

They will work as long as you can roll a 3/16 drill around the tube, in any area where the connector will be positioned,and things are close ie portions of the carbs.
Stock is fine, only thing so far that may be an issue is VM 29 or other non factorycarbs if close to the coupler clamp..easy to check.
Should be available end of first week of January.

Nic · « **Reply #176 on:** December 27, 2013, 02:42:23 pm »

I'm in for a set if pos.

KrautKoffin · « **Reply #177 on:** December 27, 2013, 03:16:55 pm »

I'm still in, can we get the specs of where to cut before the kit is ready? If like to cut and work on my top end and finish with installing this kit.

754 · « **Reply #178 on:** December 29, 2013, 12:12:39 pm »

I will go over that a bit more in next day or two, front looks like width of stock ignition switch bracket in position plus 1.3 inches rearward.

754 · « **Reply #179 on:** January 07, 2014, 03:01:53 pm »

Got a whole pile of them, nearly finished..should be ready to ship Friday or Monday, will get shipping prices in next day or two.

Nic · « **Reply #180 on:** January 07, 2014, 03:10:33 pm »

Cool

KrautKoffin · « **Reply #181 on:** January 07, 2014, 05:16:10 pm »

Yay! Can't wait for mine. Any word on installation instructions?

754 · « **Reply #182 on:** January 07, 2014, 07:53:10 pm »

I will go out in the snow and look at a frame with carbs and motor in it. Front looks like it will be 3.3 inches back from front weld will look it over Wed..

KrautKoffin · « **Reply #183 on:** January 07, 2014, 10:56:13 pm »

Quote from: 754 on January 07, 2014, 07:53:10 pm

I will go out in the snow and look at a frame with carbs and motor in it. Front looks like it will be 3.3 inches back from front weld will look it over Wed..

Don't get frostbite on my account!

Terry in Australia · « **Reply #184 on:** January 08, 2014, 02:11:07 am »

Looking good Frank!

754 · « **Reply #185 on:** January 09, 2014, 10:47:44 pm »

First few are done, just have to make more flatbar straps for the triangle

KrautKoffin · « **Reply #186 on:** January 09, 2014, 11:39:01 pm »

Frank, let me give you my money!

Nic · « **Reply #187 on:** January 10, 2014, 12:06:25 am »

I'm ready to pay as well, let us know paypal addy and price with shipping to Oz please maaaatttee.

timbo750 · « **Reply #188 on:** January 10, 2014, 12:47:27 am »

Ready to pay when I know the cost to aus. Can I have 2 please, one for the next project?

Sent from my GT-I9505 using Tapatalk

martin99 · « **Reply #189 on:** January 10, 2014, 01:26:18 am »

Can you work out a price for the UK too please?

754 · « **Reply #190 on:** January 10, 2014, 07:15:40 am »

I will pm you withbshipping price.

martin99 · « **Reply #191 on:** January 10, 2014, 11:33:52 am »

Thanks mate

Hooligan · « **Reply #192 on:** January 10, 2014, 03:09:04 pm »

Please send info on pricing. Need a Kit ASAP. Thanks!

754 · « **Reply #193 on:** January 10, 2014, 08:38:36 pm »

I will pm everyone with shipping prices in the am, just got back late.

Nic · « **Reply #194 on:** January 11, 2014, 01:00:59 pm »

Just paid for mine. Thanks again Frank.

KrautKoffin · « **Reply #195 on:** January 11, 2014, 01:12:10 pm »

$ sent, thanks frank!

martin99 · « **Reply #196 on:** January 11, 2014, 01:49:00 pm »

Same here Frank, thanks.

754 · « **Reply #197 on:** January 12, 2014, 09:50:20 am »

I should mention a couple of things.
If your frame is powdercoated,try to measure diameter of the frame tubes. . If the buildup is thick there are two options. Either the frame tube gets sanded down to regular. Paint thickness, or. I will have to make some collars with additional clearance.
The stock frames I have measured. Are about 1.006 in size.
The other thing is I have been using black fasteners that can and will rust, i will be getting zinc plated fasteners later in the week, they are more cost, but I feel it is a better way to go overall. It will push shipping back to the end of the coming week, if you want those included

timbo750 · « **Reply #198 on:** January 12, 2014, 10:16:08 am »

Frank, I would rather wait for the zinc.

Sent from my GT-I9505 using Tapatalk

KrautKoffin · « **Reply #199 on:** January 12, 2014, 10:20:21 am »

Zinc here too

News:

Author Topic: Frame mod cb 750 (Read 75589 times)

Nic

Nic

Nic

Nic