Author Topic: so i've got my back wheel off...  (Read 1002 times)

0 Members and 1 Guest are viewing this topic.

Offline domer

  • I got a bridge for sale, and it was built by a
  • Expert
  • ****
  • Posts: 902
  • everything is better with a bag of weed!
so i've got my back wheel off...
« on: December 25, 2009, 09:31:35 PM »
for paint and polish mostly, but since its off is there anything i should check for? chain is new, wheel bearings are new, tires are new, sprocket is good... anything else i should be looking for??? thanks! oh ya 73 cb500

Offline Industrial Cafe

  • Like a well oiled
  • Really Old Timer ...
  • *******
  • Posts: 6,372
  • [Brian] I've got something to say about that!
    • Undead Asphalt
Re: so i've got my back wheel off...
« Reply #1 on: December 25, 2009, 10:20:26 PM »
check the brake shoes and the drum condition.
I've had the stopping material separate from the aluminum backer on one end of the shoe.
everything I say is pure speculation and
I have no idea what I'm talking about  ._.


                                    Marla              .:71CB750:.CAFE

Offline gane

  • Gane
  • Enthusiast
  • **
  • Posts: 198
Re: so i've got my back wheel off...
« Reply #2 on: December 26, 2009, 11:36:26 AM »
Rim for true, spokes for frozen/ uniform tightness, rust build-up/pitting. center spacer for presence & tauntness, cush drive to hub spacer for presence. shoes for lining/cracks. brake cam for clean/lube/wear.brake panel for proper bolt/washers/nut cotter. stay arm for same.