Author Topic: CB750 K3 AIRBOX TABS MISSING - NEED DIMENSIONS.  (Read 756 times)

0 Members and 1 Guest are viewing this topic.

Offline cbdog

  • Full Member
  • *
  • Posts: 6
CB750 K3 AIRBOX TABS MISSING - NEED DIMENSIONS.
« on: July 24, 2010, 01:48:02 AM »
I have just taken possession of a CB750 K3 that I intend on cleaning up over the next few months. My problem is that the tabs that the airbox attaches too have been crudely cut off. I can make them at work, but would like some dimensions so I can get as close as possible to their original size and function. Any help/pictures/dimensions/traced originals etc would be greatly appreciated. ::)

Offline Duke McDukiedook

  • Space Force 6 Star General
  • Really Old Timer ...
  • *******
  • Posts: 12,690
  • Wish? Did somebody say wish?
Re: CB750 K3 AIRBOX TABS MISSING - NEED DIMENSIONS.
« Reply #1 on: July 24, 2010, 08:24:02 AM »
Some pics or drawings showing exactly what dims you need would help everyone immensely.
"Well, Mr. Carpetbagger. We got somethin' in this territory called the Missouri boat ride."   Josey Wales

"It's Baltimore, gentlemen. The gods will not save you." Ervin Burrell

CB750 K3 crat | (2) 1986 VFR750F

Offline tgtint

  • Full Member
  • *
  • Posts: 77
Re: CB750 K3 AIRBOX TABS MISSING - NEED DIMENSIONS.
« Reply #2 on: July 24, 2010, 08:48:07 AM »
I think this is what you need... this is a 73' CB750... haven't had my coffee yet and I'm not that precise but this should get you close to where you need to be. 



1973 CB750

Offline cbdog

  • Full Member
  • *
  • Posts: 6
Re: CB750 K3 AIRBOX TABS MISSING - NEED DIMENSIONS.
« Reply #3 on: July 24, 2010, 11:47:14 PM »
Thanks tgtint!!!
Sorry I wasn't specific with my question Dookiedook, but Tgtint has hit the nail on the head.
Tgtint you are a great help.
The only measurement  I need to confirm now, is from the centre of the bolt hole to the bottom of the tab. I know I can get close but if you can help with this last dimension I would feel a lot happier.
Thanks again for the prompt reply!