« previous next »
Pages: [1]   Go Down

Author Topic: engine seized  (Read 7646 times)

0 Members and 2 Guests are viewing this topic.

Offline northwestdrew

  • Full Member
  • *
  • Posts: 20
engine seized
« on: January 13, 2010, 10:27:16 AM »
Hello from the frozen region of northwest Indiana, ran across this product in a sailing magazine. I dont know if it works but it has a money back guarantee, called engine release supposed to dissolve corrosion and free up sized pistons. see it at www.enginerelease.com   
« Last Edit: September 10, 2011, 08:59:13 PM by Gordon »
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: engine sized
« Reply #1 on: January 13, 2010, 10:32:05 AM »
I wonder if it works better, or is any different than ATF and Acetone?
Logged

Offline vanillagorilla

  • When did I become a
  • Hot Shot
  • ***
  • Posts: 710
    • The ole Facebook Profile...
Re: engine sized
« Reply #2 on: January 13, 2010, 11:54:54 AM »
"Developed by NATO"???
Logged
1978 CB750K 1976 Z1 2 Trail 90s

Offline Gaucho

  • Enthusiast
  • **
  • Posts: 116
Re: engine sized
« Reply #3 on: January 18, 2010, 06:58:14 AM »
"Use an impact gun on the flywheel bolt to free the engine" ???
I think I'll pass.
Logged

Offline DavePhipps

  • Expert
  • ****
  • Posts: 1,150
  • Reading the entire Hi-Perf forum
    • Hillside Technology
Re: engine sized
« Reply #4 on: March 08, 2011, 08:55:13 PM »
Those shose are great at freeing up engines!!!!
Not developed by NATO though.
Someone made the shoe spam go away.
« Last Edit: March 10, 2011, 06:02:27 PM by DavePhipps »
Logged
Bikes:
90 FZR600 RA
74 CB550k
78 GL1000
72 CB500K

Offline mrbreeze

  • Not your average
  • Really Old Timer ...
  • *******
  • Posts: 5,902
  • Shut up when you're talkin' to me!!
Re: engine sized
« Reply #5 on: March 08, 2011, 09:09:54 PM »
 I'm gettin' mutha fokin' tired of these mutha fokin' shoes...............(offtake from Snakes On A Plane) ;D ;D
Logged
MEMBER # 257
Fool me once..shame on you. Fool me twice..I'm kickin' your a$$......

Offline trav

  • Full Member
  • *
  • Posts: 10
Re: engine sized
« Reply #6 on: March 20, 2011, 07:01:45 PM »
Not a thing wrong with an impact gun/wrench if you know what you are about.  It's simply dynamic torque.

Quote from: Gaucho on January 18, 2010, 06:58:14 AM
"Use an impact gun on the flywheel bolt to free the engine" ???
I think I'll pass.


Sent from my iPhone using Tapatalk
Logged

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: engine sized
« Reply #7 on: September 10, 2011, 07:16:00 PM »
Quote from: northwestdrew on January 13, 2010, 10:27:16 AM
Hello from the frozen region of northwest Indiana, ran across this product in a sailing magazine. I dont know if it works but it has a money back guarantee, called engine release supposed to dissolve corrosion and free up sized pistons. see it at www.enginerelease.com

That should be engine seized NOT sized.
Logged

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,314
  • So, what do ya wanna talk about today?
Re: engine sized
« Reply #8 on: September 10, 2011, 07:19:45 PM »
Quote from: lucky on September 10, 2011, 07:16:00 PM
That should be engine seized NOT sized.

I thought maybe it's so cold in the frozen north of Indiana that the engine might have shrunk? ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline pencil9

  • Full Member
  • *
  • Posts: 13
Re: engine seized
« Reply #9 on: January 09, 2014, 08:39:57 PM »
THREE FOOT BREAKER BAR on the end of the rotor bolt, rocked back and forth,
(after using your favorite penetrating compound in the cylinder of course!) has worked wonderfully for me.   Often without even taking the motor apart.    Just squirt PB or whatever in the plug holes, let 'er sit 4 a spell, the commence to rock
the crank back and forth carefully.
Logged

tyler

  • Guest
Re: engine seized
« Reply #10 on: May 24, 2015, 03:22:27 AM »
Marvel mystery oil is the best. I broke loose a 85 VF500 engine that had been in the elements for a long time. Secret is the mint. Great for aluminum cleaning.
Logged

Offline Lucky K0

  • Retired Sailor
  • Full Member
  • *
  • Posts: 12
Re: engine seized
« Reply #11 on: June 19, 2015, 03:51:34 PM »
I have diesel in my cylinders now and am fixing to get some Marvel Mystery Oil for the next round...  I have tried to kick it in neutral and to rock it back and forth while in 4th and 5th gear with no joy.  Remember I am a novice new to this motor and be nice when I ask this question?

Where exactly would I put a breaker bar or impact wrench? 
Logged
Cheers,  Blake

"Life's tough, it's tougher when you're stupid." John Wayne

Offline Vinhead1957

  • Expert
  • ****
  • Posts: 1,196
Re: engine seized
« Reply #12 on: June 19, 2015, 04:54:23 PM »
No where! Let the stuff do it's thing.   ATF and mystery oil.  And rock it as you have in gear. Patience will stop you from breaking stuff.   
Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,910
  • Bought her new 4/75
Re: engine seized
« Reply #13 on: June 19, 2015, 07:19:10 PM »
If it's frozen due to a little rust then use your lube and rock it, breaker bar on the crank, etc. If it's damaged from jacked up pistons, valves, rods etc then open it up.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Redline it

  • Hot Shot
  • ***
  • Posts: 561
  • thread killer
Re: engine seized
« Reply #14 on: August 21, 2015, 11:15:36 PM »
Quote from: Jerry Rxman Griffin aka MuthaF'er on June 19, 2015, 07:19:10 PM
If it's frozen due to a little rust then use your lube and rock it, breaker bar on the crank, etc. If it's damaged from jacked up pistons, valves, rods etc then open it up.

Exactly, or learn the hard way. A little off motor types, had a nice GM250ci that got a 4 year rain drip through the flame arrestor air cleaner bolt. not much water in the pan, drained it, removed the head. No nut on harmonic balance pulley, so, after marvel and atf for 2 weeks (only 2 cylinders had rust,) used a 4x4 and 20lb sledge on those 2 pistons thinking I'm going to have to waste those and maybe hone the rusted cylinders...I quit after 3 4x4's were shredded, I could barely get pistons beat down from tdc to bdc hard as I could hit it (with a 20lb sledge?)  but you'd have to watch a time lapse video to actually see it move. Crankshaft, camshaft or distributor shaft has to be massively swelled up. Those pistons are beyond tough.
Logged

Offline lvhbugman

  • Full Member
  • *
  • Posts: 1
Re: engine seized
« Reply #15 on: September 22, 2015, 07:28:46 AM »
I just started to deconstruct my F2 engine and the #1 and #4 pistons were seized in the jugs. I filled the cylinders with PB blaster and tapped on the head with a rubber mallet and a block of wood so as not to damage the fins. I repeated this every few hours for about three days.

What I think ultimately did the trick was to wedge a long heavy digging bar under the edge of the block, using a block of wood as a fulcrum, and pushing the block up off the piston heads. There was some creaking and groaning (me and the engine, lol) but it finally came free. The hardest part was figuring out how to apply the right amount of force in the right direction, and this worked very well.

Logged
Pages: [1]   Go Up
« previous next »