Author Topic: 500 rear brake  (Read 700 times)

0 Members and 1 Guest are viewing this topic.

Offline KurtK

  • Full Member
  • *
  • Posts: 60
500 rear brake
« on: January 25, 2010, 06:46:08 AM »
I ordered new brake pads from E bay for my 500.  I did see that some folks had some problems with aftermarket brakes...and sure enough these brakes were about 1/8" to wide on both the side that goes around the post and on the cam side.  I had to grind them down to make them fit.  If I had bought the brakes from Honda would I have been better off?

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,044
  • CB500 Number 1000036
Re: 500 rear brake
« Reply #1 on: January 25, 2010, 09:12:16 AM »
The rear brake shoes for the 450 and 500 twin plus the 500 and 550 four are all the same even tho' the brake plates and cams vary. Sounds like you got some wrong or incorrectly finished ones. I found Vesrah are Ok
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!