« previous next »
Pages: [1]   Go Down

Author Topic: CB550 shift drum retaining bracket looks bent, badly?  (Read 940 times)

0 Members and 1 Guest are viewing this topic.

Offline cb550fcafe

  • Hot Shot
  • ***
  • Posts: 298
    • KDI Cycles
CB550 shift drum retaining bracket looks bent, badly?
« on: February 03, 2010, 04:34:38 am »
I'm tearing down a 76 CB550F for rebuild, I found the shift drum retainer badly bent. So I took another 550 apart and found the same thing, just alot less bent. So is this normal? Or is there something I need to take a closer look at?
Logged

Offline steam-powered man

  • Not the eggman, Not the walrus, I am the
  • Hot Shot
  • ***
  • Posts: 591
  • Where are you going? I was going to make Espresso
Re: CB550 shift drum retaining bracket looks bent, badly?
« Reply #1 on: February 03, 2010, 10:30:28 am »
just checked my 76cb550k retainer, not bent as much.  the nearby threaded insert moves in/out just a bit.  the retainer seems to limit this movement to about 1/32 proud of the case.     
bobp
Logged
searching for a dr350se

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: CB550 shift drum retaining bracket looks bent, badly?
« Reply #2 on: February 03, 2010, 04:00:08 pm »
That end of the retainer prevents the shifter fork shaft from coming out of the case. It should be straight but as shoemaniii said does not touch the shaft .
Logged
Pages: [1]   Go Up
« previous next »