Author Topic: Racing project with MARTIN frame for 500 HONDA Four (Read 31822 times)

GEORGES · « **on:** February 04, 2010, 01:25:38 AM »

I found a MARTIN frame four 500 HONDA four, not easy because no more 10 were built

One 500 Four MARTIN and nude frame.

The engine of Benelli sei is a copy of the 500 Four Honda with two cylinder more, i always said that it's possible to put the six in a frame for four.

New pics of projects after because i must resize them.

cb1100rb · « **Reply #1 on:** February 04, 2010, 02:15:07 AM »

Joli !

GEORGES · « **Reply #2 on:** February 04, 2010, 04:27:59 AM »

Current works

, summer kitchen warmer than the garage here it's winter

Ecosse · « **Reply #3 on:** February 04, 2010, 10:49:01 AM »

either you're not married or have the best spouse anyone could hope for.

i have the picture of the black 500 but didn't think to post; while scanning the 'net i came across a french forum and saw that you were there. clearly, and understandably, you have more images and leads than i.

love those pix of the benelli bare frame. any of engine details?

btw: always thought a cr750 faired honda would look great in french racing ~~blue~~ bleu.

ColinMc · « **Reply #4 on:** February 04, 2010, 11:53:47 AM »

Quote from: Ecosse on February 04, 2010, 10:49:01 AM

either you're not married or have the best spouse anyone could hope for.

+ 1 BILLION! lol

That motor never looked wider than in that frame, curious to see where this goes though...good luck!

GEORGES · « **Reply #5 on:** February 04, 2010, 01:38:59 PM »

Dear ECOSSE and COLIN, i don't know if i all understand, for the project take a date in few weeks i have few engine of Benelli sei, i think that i'll put a 750 in the frame (same size than 900), because it's more speddy to climb in regime engine, for the black 500 Martin it's possible to have other pictures if you want, but now the biker brake the Honda engine and put a Benelli 500 in the frame.

Excuse me for my langage but english it's hard for me

If you have need some french question ask me.

Ecosse · « **Reply #6 on:** February 04, 2010, 01:59:41 PM »

so you HAVE benelli motors? could you take detail pictures of the motor in and outside? very curious!

so envious. i thought you were building a replica with honda power.

do benelli and honda motors have same mounting points?

have you made these frames?

sorry but my questions are never ending.

GEORGES · « **Reply #7 on:** February 04, 2010, 02:05:28 PM »

Yes 500 Honda four and BENELLI 500 four, 750 six and 900 six have excatcly the same monting point.

For the engine i'll send you pics.

turboguzzi · « **Reply #8 on:** February 04, 2010, 02:11:07 PM »

georges,

if you need a rider for the 500 in a VMA championnat race, just let me know..... Milano is near

That 500 is too good looking!

TG

GEORGES · « **Reply #9 on:** February 04, 2010, 02:11:36 PM »

I have pics on my other computer, i'll send to morow

Ecosse · « **Reply #10 on:** February 04, 2010, 02:14:24 PM »

comment sont-disponibilité des pièces pour moteurs Benelli?

J'utilise un traducteur de site Web de ce texte afin de me pardonner si cela n'a aucun sens. $:-\$

GEORGES · « **Reply #11 on:** February 04, 2010, 02:18:08 PM »

Hello Turboguzzi,

My italian Benelli bikes aren't a race bike, they are only a spécial motorcycle lonely and i hope lovely, the Benelli sei never win a once off victory on the circus, even JOEY DUNLOP failled

but i love them

GEORGES · « **Reply #12 on:** February 04, 2010, 02:21:05 PM »

To Ecosse,

Very difficult and expensive to find, a lot of searches on the web or stock exchange

Ecosse · « **Reply #13 on:** February 04, 2010, 02:29:01 PM »

d'être clair: est le 500 noir vôtre?

J'ai posté cette moto sur ce forum que j'aime "châssis de la colonne vertébrale" de motocycles.

est votre réservoir en fibre de verre?

Je vais transmettre tout i informations peuvent creuser sur ces "Honda italien».

to be clear: is the black 500 yours?

i've posted that bike on this forum as i love "spine frame" motorcycles.

is your tank fiberglass?

i will pass along any information i can dig up about these "italian hondas".

(thanks for the benelli engine diagram!)

GEORGES · « **Reply #14 on:** February 04, 2010, 02:35:48 PM »

no, it's not my bike and don't like tanker to much short, the escape to low and the gold frame, but somebody like that he want

I'll found other pics for you.

turboguzzi · « **Reply #15 on:** February 04, 2010, 02:49:24 PM »

so who owns the 500?

that escape (exhaust) can be fixed, you know

cavebear · « **Reply #16 on:** February 04, 2010, 08:38:32 PM »

Georges,

I i am starting to build a Moto Martin backbone frame chassis # 350 for a CB 750. Any information from you or the forum would be appreciated. The first thing to do is to covert the backbone to oil in fame, capacity about 1 gallon. Next I haven't found a suitable gas tank for the bike and would like to know the tank measurment such as width, length and height and how much gas can it hold and is it made out of fiberglass? And do you have a tank like that for sale?
To be clear i am talking about the gas tank on the bike on the kitchen table
Thanks,
Mike

GEORGES · « **Reply #17 on:** February 04, 2010, 11:58:53 PM »

Hello Cavebear,

You have a lovely frame, it's the same génération of my, if i understand and it's not easy for me you have need a gaz tank and oil tank.

I haven't to sail, but i can give you adresses to find in France.

[attachment deleted by admin]

GEORGES · « **Reply #18 on:** February 05, 2010, 12:26:56 AM »

More pics

GEORGES · « **Reply #19 on:** February 05, 2010, 01:08:20 AM »

For frame Egli or Martin

cavebear · « **Reply #20 on:** February 05, 2010, 01:20:24 AM »

Georges, Grandes photos ! Oui si vous avez des sources pour des pièces en France que je voudrais savoir qui elles sont ainsi je peux entrer en contact avec elles. Pour des démarreurs j'ai besoin d'un siège, d'un réservoir de gaz, d'un réservoir de stockage de pétrole et d'un capot de carénage. Merci,

Mike

GEORGES · « **Reply #21 on:** February 05, 2010, 02:58:09 AM »

Hello dear friends,

You can see theses parts on

http://fandecaferacer2009.forumactif.com/

But you have need to make a free inscription and a présentation.

The builder can do everythinks you want, spécial tank or spécial oil tank for 750 Four.

Egli, MARTIN, JAPAUTO

He make parts of the standard frame too.

He made my tank and my seet you can see on my MARTIN frame.

I hope you'll find that you want.

GEORGES · « **Reply #22 on:** February 05, 2010, 03:01:32 AM »

For Cavebear

look in

http://pilleboue.free.fr/

year 1977 catalog

GEORGES · « **Reply #23 on:** February 05, 2010, 04:54:51 AM »

For Ecosse

GEORGES · « **Reply #24 on:** February 05, 2010, 05:00:28 AM »

A very lovely MARTIN 500 four

News:

Author Topic: Racing project with MARTIN frame for 500 HONDA Four (Read 31822 times)