« previous next »
Pages: [1]   Go Down

Author Topic: Sport bike tail section on these CB's  (Read 2253 times)

0 Members and 1 Guest are viewing this topic.

Offline DaytonGuy

  • Enthusiast
  • **
  • Posts: 231
Sport bike tail section on these CB's
« on: February 16, 2010, 01:54:05 PM »
Anyone fit a more modern sport bike tail section on a cb?  Any pics? 
Logged

Offline mgbgt89

  • Hot Shot
  • ***
  • Posts: 562
Re: Sport bike tail section on these CB's
« Reply #1 on: February 16, 2010, 02:00:52 PM »
Haha.. I just made one last night, sort of.

It's a stock F tail section. I removed everything under it. Trunk, fender, grab rail, tail light, turn signals. I filled the hole with a CBR600 tail light, and finished the underside in sheet metal. I'll post some pictures in a bit.
Logged

Offline mgbgt89

  • Hot Shot
  • ***
  • Posts: 562
Re: Sport bike tail section on these CB's
« Reply #2 on: February 16, 2010, 02:12:10 PM »
I know its not a whole sportbike tail, but it cleaned up the rear of the bike a ton. I plan on wiring up the 2 bulbs as left and right signals also.








It still needs tunneled a bit behind the tail light so it sits flush over the frame rails, thats tonights project.
« Last Edit: February 16, 2010, 02:14:33 PM by mgbgt89 »
Logged

Offline DaytonGuy

  • Enthusiast
  • **
  • Posts: 231
Re: Sport bike tail section on these CB's
« Reply #3 on: February 16, 2010, 02:54:50 PM »
That looks pretty sweet.  Nice and clean.  Thanks
Logged

Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: Sport bike tail section on these CB's
« Reply #4 on: February 16, 2010, 03:00:05 PM »
I don't think anyone's done it completely yet...

I'm working on it.... and so is DollarBill. Look for his Yellowjacket project. He has pictures of just a minor mock-up.

I don't have squat to show. :'(
Logged
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,485
Re: Sport bike tail section on these CB's
« Reply #5 on: February 16, 2010, 03:52:30 PM »
Hardly modern, but you did say more modern right?  ;D

How about an 85 Interceptor tail/seat/fender grafted on a CB550.


« Last Edit: February 16, 2010, 03:54:38 PM by bwaller »
Logged

Offline mgbgt89

  • Hot Shot
  • ***
  • Posts: 562
Re: Sport bike tail section on these CB's
« Reply #6 on: February 16, 2010, 04:22:00 PM »
Now that's pretty cool!
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Sport bike tail section on these CB's
« Reply #7 on: February 16, 2010, 07:37:30 PM »
Somewhere on the site is a picture of a 750/4 with a late model Ducati rear on it, i think it is in Greece or Italy...

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,348
Re: Sport bike tail section on these CB's
« Reply #8 on: February 17, 2010, 07:03:34 PM »
Don't forget the guy who was putting the CB919 (hornet) tank on his 550....
http://forums.sohc4.net/index.php?topic=53358.0

Quote from: dickc on December 09, 2009, 08:38:39 AM
I know it's been a while guys but I have been road racing a lemons car and it took most of my time and $$$. Well winter is hear and I am on the bike. I want to have it ready for the little sturgis rally.



I got the tail and seat from a cbr600rr. I have moved all the electrics under the tank. They fit very nice. I have a scooter battery that I will be mounting under the passenger seat that I just won on ebay. I need to clean off all the mounting tabs on the frame.




Logged

Offline JZEROE

  • Enthusiast
  • **
  • Posts: 164
Re: Sport bike tail section on these CB's
« Reply #9 on: February 17, 2010, 07:39:35 PM »
Sacrilege!
Logged
'75 CB400F
'76 CB750K - Project Freebike

Offline HavocTurbo

  • Angry little bastard of an
  • Old Timer
  • ******
  • Posts: 3,739
  • Can you tell?
Re: Sport bike tail section on these CB's
« Reply #10 on: February 17, 2010, 07:49:57 PM »
Logged
'48 HD Panhead - Exxon Valdez
'78 CB550K - Fokker CB.3
'78 Honda CB750K - Mavrik
'80 Yamaha XS850G - Kanibalistik
09 XL883L - No Name

coheed

  • Guest
Re: Sport bike tail section on these CB's
« Reply #11 on: February 17, 2010, 10:34:16 PM »
Quote from: JZEROE on February 17, 2010, 07:39:35 PM
Sacrilege!
Atleast he's brand loyal. LOL   :P
Logged

Offline JZEROE

  • Enthusiast
  • **
  • Posts: 164
Re: Sport bike tail section on these CB's
« Reply #12 on: February 18, 2010, 07:28:33 PM »
Just seems a shame to make an old bike look like a new bike. Probably cost less to just buy a new one, right?
Logged
'75 CB400F
'76 CB750K - Project Freebike

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,348
Re: Sport bike tail section on these CB's
« Reply #13 on: February 18, 2010, 07:43:24 PM »
The way I see it eventually all of the old stock seats will be worn out and gone, tanks eventually rust too, lots of original parts are getting hard to find.  New parts sources are always a good thing, is there really a difference between building a custom tank or a custom seat and sourcing one from a newer bike?  It's all personal taste that's being debated here.  I prefer to ride my own bike rather than argue what should or shouldn't happen to someone else's.

Logged

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,485
Re: Sport bike tail section on these CB's
« Reply #14 on: February 18, 2010, 07:54:19 PM »
Quote from: JZEROE on February 18, 2010, 07:28:33 PM
Just seems a shame to make an old bike look like a new bike. Probably cost less to just buy a new one, right?

You're as right as you want to be.

In my situation this thing was a basket case with no seat, and turned into one of the most comfortable bikes I've ever ridden. The way I look at it I saved an old bike, no shame in that.

For the purist in you my 750 & 400 both are very much stock looking.
Logged

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
Re: Sport bike tail section on these CB's
« Reply #15 on: February 18, 2010, 08:21:48 PM »
i'd feel bad about all the modifcations i've done to my k4, if it were actually all original. k4 frame, k6 motor, k5 swingarm and rear wheel, f0 fork sliders and front wheel, k3 tank.
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894

Offline JZEROE

  • Enthusiast
  • **
  • Posts: 164
Re: Sport bike tail section on these CB's
« Reply #16 on: February 19, 2010, 07:48:24 AM »
Yeah, saving an old CB is definitely good thing, and I'm sooo far from being a purist. I firmly believe that motorcycling is all about doing your own thing—both on the road and in the shop. It's just that the mid-70's (before I was born, BTW), is, in my opinion, the high point of the motorcycle aesthetic.
Logged
'75 CB400F
'76 CB750K - Project Freebike

Offline gerhed

  • Master
  • *****
  • Posts: 1,801
Re: Sport bike tail section on these CB's
« Reply #17 on: February 19, 2010, 07:53:08 AM »
Quote from: DaytonGuy on February 16, 2010, 01:54:05 PM
Anyone fit a more modern sport bike tail section on a cb?  Any pics? 
I used the tail section from a Kawa H2

pic attached
Logged
Rides: 75 CB750F, 48 Indian Chief, 67 Triumph TR6, 63Honda CA95
          83 XL600R in CB360 Frame
          3-wheel electric tilting cycle
Pages: [1]   Go Up
« previous next »