Author Topic: looking for filters (Read 2146 times)

Loki · « **on:** February 16, 2010, 05:43:55 PM »

ok im online looking at the sites i know i can buy filters, but i kinda like the horn filter, cant find any of course, but what kinds are out there and what would you guys said would be the best type of pod filters to buy?

Old Scrambler · « **Reply #1 on:** February 16, 2010, 06:10:21 PM »

My opinion is the larger oval-shaped pods will tend to reduce the surging at steady speed problems some (most) riders will encounter.

Loki · « **Reply #2 on:** February 16, 2010, 06:21:13 PM »

id also love sites aswell

george · « **Reply #3 on:** February 16, 2010, 07:00:11 PM »

I use K&N oval pods on my K8,of course went thru the re-jetting process. Here is a link, I actually measured my carb throats and went to the K&N website, got the P/N and then had O'reilly auto parts special order them. I think it was a bit cheaper, they are expensive but they should last forever. Here is a pic on my K8.
George

http://www.oldbikebarn.com/K-N-oval-elements-with-rubber-end-caps-RU-2454?sc=12&category=52302

http://www.knfilters.com/

Loki · « **Reply #4 on:** February 16, 2010, 07:23:04 PM »

ya those are nice, but damn they're expensive! are the oval shaped pods better for any resin? i like the horn pods but cant find where to buy them.

george · « **Reply #5 on:** February 16, 2010, 07:30:10 PM »

I don't know if oval is better, seems like more surface area , I just didn't want round like everyone else !

What exactly is a horn pod ? Maybe I can help locate

Loki · « **Reply #6 on:** February 16, 2010, 07:33:00 PM »

im naming it wrong, im looking for it but nothing is showing up....

Loki · « **Reply #7 on:** February 16, 2010, 07:33:41 PM »

it kinda looks like the end of a trumpet on each of your carbs

wdhewson · « **Reply #8 on:** February 16, 2010, 07:34:50 PM »

If the filter is reasonably free flowing, then the air intake should not be upset, with the possible exception of WOT where the flow characteristics might get challenged.

george · « **Reply #9 on:** February 16, 2010, 07:35:17 PM »

Velocity stacks !
stand by I'll link you up

Loki · « **Reply #10 on:** February 16, 2010, 07:35:57 PM »

kinda look like this............nice thanks

george · « **Reply #11 on:** February 16, 2010, 07:36:31 PM »

These are SWEET

http://www.steeldragonperformance.com/products_2.html

Loki · « **Reply #12 on:** February 16, 2010, 07:37:49 PM »

those are damn nice!!!...but are they good for everyday use......or should i be leaning towards the norm...

george · « **Reply #13 on:** February 16, 2010, 07:41:18 PM »

Here's Carpy's I used to run em all the time with only a wire mesh screen , today I want better filtration, that's why I like K&N

http://www.cb750cafe.com/parts.php?id=45

Loki · « **Reply #14 on:** February 16, 2010, 07:47:54 PM »

ya theyre not as nice as the other ones, but when it comes to performance, practicality,and all that jazz, would it be better to go with a pod filter?

george · « **Reply #15 on:** February 16, 2010, 07:56:17 PM »

Ok here is the whole pod vs air box thread, only about 65 pages, some hate pods , some love em. Check it out ! Are you using synthetic oil ?

http://forums.sohc4.net/index.php?action=search2

george · « **Reply #16 on:** February 16, 2010, 07:58:53 PM »

My Bad do search "pods vs air box "

http://forums.sohc4.net/index.php?topic=20869.0

Loki · « **Reply #17 on:** February 16, 2010, 08:01:45 PM »

i was told not to use synthetic oil....... the old seals might not take to it or something?

george · « **Reply #18 on:** February 16, 2010, 08:04:32 PM »

Quote from: Rubber-Ducky on February 16, 2010, 08:01:45 PM

i was told not to use synthetic oil....... the old seals might not take to it or something?

I was stepping on a slippery subject, again my bad, let's tackle the pods and the all balls then we can deal with oil !

Loki · « **Reply #19 on:** February 16, 2010, 08:18:33 PM »

lol, no problem, and thanks for the help so far. im really just look ing for something thats looks good, like the velocity stems, but if that not as practical then im go with pods, .......affordable pods. lol ( i dont like the cone shape ones)

Loki · « **Reply #20 on:** February 17, 2010, 05:05:37 AM »

are there any better types/affordable ones? i think spending 200 on a set of four is a little to much.

Loki · « **Reply #21 on:** February 18, 2010, 04:52:43 PM »

ok so here are a few more affordable ones what are everyone's thoughts>? are the pancake ones better? or is it just fine to go with cone filters? anyones have or seen better ones?

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=230438274866&ssPageName=STRK:MEWAX:IT

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170424970904&ssPageName=STRK:MEWAX:IT

News:

Author Topic: looking for filters (Read 2146 times)

wdhewson