Author Topic: Will a 81 CB650 exhaust fit a 76 CB550F? Can someone measure their exhaust?  (Read 1948 times)

0 Members and 1 Guest are viewing this topic.

Granitsky

  • Guest
I am looking for an exhaust for my CB550F 76, and I found one from an 81 CB650 for $30. Would it fit? Probably just a 1/2 inch off or something eh?  Could any of you measure the distance between 1st and 4th header pipes on their CB650?

Thanks
« Last Edit: January 12, 2006, 02:43:26 PM by Granitsky »

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
CL to CL is about 10 7/8.  Just using a tape.  The inner two cyls angle inwards and the outer two angle out.



             Terry
18 grand and 18 miles dont make you a biker

Granitsky

  • Guest
anyone used a MAC exhaust?
« Reply #2 on: January 12, 2006, 07:09:15 PM »
Thanks. I am away from my bike right now but it measured about 12 1/8" from outer edge to outer edge. I hope it works, otherwise I will go for an exhaust from

 http://www.motorcycle-exhaust.com

They have the MAC exhaust for 184.99. I hope it works well. Anyone used that?

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
I have 2 sets and like them.   




               Terry
18 grand and 18 miles dont make you a biker

Offline fishtoft

  • Full Member
  • *
  • Posts: 38
The 650 block is I believe slightly taller than the 550 about .5", don't know if this would effect the pipes, worth further investigation maybe. ???

Offline volz1fsu

  • Enthusiast
  • **
  • Posts: 104
For $30 I can't see how you could go wrong. Could always sell them again for that price.