« previous next »
Pages: [1]   Go Down

Author Topic: Cleanng oil pickup screen.  (Read 2387 times)

0 Members and 1 Guest are viewing this topic.

Saml01

  • Guest
Cleanng oil pickup screen.
« on: February 25, 2010, 08:00:00 PM »
What is the accepted practice when it comes to taking care of these things?

I am really averse to taking off the right case cover because its messy, might necessitate a new gasket or permatex and generally looks like a pita.

Last oil change, the oil was free from any metal particulate, and looking down the fill hole into the sump, it looks clean.
Bike has 12k miles and im wondering if I should bother with it.
Logged

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,609
Re: Cleanng oil pickup screen.
« Reply #1 on: February 26, 2010, 06:04:09 AM »
What bike???
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline Kframe

  • Hot Shot
  • ***
  • Posts: 579
  • Life is good!
Re: Cleanng oil pickup screen.
« Reply #2 on: February 26, 2010, 08:58:30 AM »
Yeah what bike?
On the 550 I think the screen is up under the oil pan.
-K
Logged
2007 Triumph Bonneville T100, ARK'd, Pods, TOR's, Napoleon's, Innovate G5 Air/Fuel Gauge, Ignition Relocation by D9, Stebel Nautilus, Avon Roadriders
1984 Honda Shadow VT700c, Stock
1974 Honda CB550K, In rehab
1986 Honda Helix

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,609
Re: Cleanng oil pickup screen.
« Reply #3 on: February 26, 2010, 09:16:12 AM »
Quote from: Kframe on February 26, 2010, 08:58:30 AM
Yeah what bike?
On the 550 I think the screen is up under the oil pan.
-K

Same on the 750K.
Logged
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Saml01

  • Guest
Re: Cleanng oil pickup screen.
« Reply #4 on: February 26, 2010, 11:22:31 AM »
Quote from: Johnie on February 26, 2010, 06:04:09 AM
What bike???

My apologies, thought I put in my sig.

74 CB360.
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: Cleanng oil pickup screen.
« Reply #5 on: February 26, 2010, 12:28:57 PM »
Quote from: Saml01 on February 25, 2010, 08:00:00 PM
I am really averse to taking off the right case cover because its messy, might necessitate a new gasket or permatex and generally looks like a pita.

What is the accepted practice when it comes to taking care of these things?

Take it to a motor cycle shop and pay them to do it for you.
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Saml01

  • Guest
Re: Cleanng oil pickup screen.
« Reply #6 on: February 26, 2010, 01:04:03 PM »
Quote from: TwoTired on February 26, 2010, 12:28:57 PM
Quote from: Saml01 on February 25, 2010, 08:00:00 PM
I am really averse to taking off the right case cover because its messy, might necessitate a new gasket or permatex and generally looks like a pita.

What is the accepted practice when it comes to taking care of these things?

Take it to a motor cycle shop and pay them to do it for you.

I can do it myself, I just want to know if its due or can I ignore it for another oil change.
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Cleanng oil pickup screen.
« Reply #7 on: February 26, 2010, 01:16:05 PM »
Quote from: Saml01 on February 26, 2010, 01:04:03 PM
Quote from: TwoTired on February 26, 2010, 12:28:57 PM
Quote from: Saml01 on February 25, 2010, 08:00:00 PM
I am really averse to taking off the right case cover because its messy, might necessitate a new gasket or permatex and generally looks like a pita.

What is the accepted practice when it comes to taking care of these things?

Take it to a motor cycle shop and pay them to do it for you.

I can do it myself, I just want to know if its due or can I ignore it for another oil change.
I don't know of any bike that has cleaning of the oil pump pickup screen as a regular maintenance item.  Good idea I suppose, but not necessary. You should clean the centrifugal (dixie cup) filter. We cheat on those by taking off the round cover (Prop the bike to the left a tad so noting runs out) Take the lid off the dixie cup, fish around in there with a rag on a screwdriver until its clean, put the lid back on and the cover. Piece of cake.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Saml01

  • Guest
Re: Cleanng oil pickup screen.
« Reply #8 on: February 26, 2010, 02:30:16 PM »
Quote from: MCRider on February 26, 2010, 01:16:05 PM
Quote from: Saml01 on February 26, 2010, 01:04:03 PM
Quote from: TwoTired on February 26, 2010, 12:28:57 PM
Quote from: Saml01 on February 25, 2010, 08:00:00 PM
I am really averse to taking off the right case cover because its messy, might necessitate a new gasket or permatex and generally looks like a pita.

What is the accepted practice when it comes to taking care of these things?

Take it to a motor cycle shop and pay them to do it for you.

I can do it myself, I just want to know if its due or can I ignore it for another oil change.
I don't know of any bike that has cleaning of the oil pump pickup screen as a regular maintenance item.  Good idea I suppose, but not necessary. You should clean the centrifugal (dixie cup) filter. We cheat on those by taking off the round cover (Prop the bike to the left a tad so noting runs out) Take the lid off the dixie cup, fish around in there with a rag on a screwdriver until its clean, put the lid back on and the cover. Piece of cake.

What round cover? All I got is a whole crank case cover.
Logged

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Re: Cleanng oil pickup screen.
« Reply #9 on: February 26, 2010, 05:50:37 PM »
Quote from: Saml01 on February 26, 2010, 02:30:16 PM
What round cover? All I got is a whole crank case cover.


That's correct - 360's do not have the round cover he speaks of....
Logged
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Cleanng oil pickup screen.
« Reply #10 on: February 26, 2010, 06:23:00 PM »
Quote from: tbpmusic on February 26, 2010, 05:50:37 PM
Quote from: Saml01 on February 26, 2010, 02:30:16 PM
What round cover? All I got is a whole crank case cover.


That's correct - 360's do not have the round cover he speaks of....

Ooops my bad. I was thinking of the 350. Looks like you need to pull that cover. Your manual should recomend service intervals. But since that's the only way into the filter, I'd say every other oil change or once a year, whichever is more. But that's just me and I've already been wrong once.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Saml01

  • Guest
Re: Cleanng oil pickup screen.
« Reply #11 on: February 26, 2010, 09:07:39 PM »
Recommended service interval is 6k miles on the filter and pickup screen.

I dont know if the previous owner did anything but it seems as though the engine was out of the bike.
Logged

Offline TomC

  • Hot Shot
  • ***
  • Posts: 325
Re: Cleanng oil pickup screen.
« Reply #12 on: February 27, 2010, 06:19:53 AM »
Hi Saml01
     If it were me I would do it the next time I changed the oil. Then I would know what things look like. If all is well maybe the 6k service interval is OK. If You have to clean out a lot of crud. I would clean it out again sooner that 6k.
     TomC in Ohio
Quote from: Saml01 on February 26, 2010, 09:07:39 PM
Recommended service interval is 6k miles on the filter and pickup screen.

I dont know if the previous owner did anything but it seems as though the engine was out of the bike.

Logged
TomC in Ohio
76 CB750 F1 Daily Rider
76 CB550 stalled project
76 CB400F Injured Reserve

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,044
  • CB500 Number 1000036
Re: Cleanng oil pickup screen.
« Reply #13 on: March 01, 2010, 09:03:55 AM »
6K is correct for cleaning out the centrifugal filter and the pick up screen. Get a new clutch cover gasket and take the permatex in your right hand and either :-
(1) Dump it in the trash or
(2) throw as far away a possible .

If you use that anywhere on the 360 you will end up needing a new head and cam cover along with cam and followers
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline Green550F

  • Hot Shot
  • ***
  • Posts: 340
  • Nothing is as cool as that which you made.
Re: Cleanng oil pickup screen.
« Reply #14 on: March 01, 2010, 06:05:02 PM »
++++ Get real gaskets!

Silicone is ok in some cases but, a good gasket is unbeatable!
350/360 gasket sets are fairly cheap. Real cheap compared to doing it over!
Logged
93 Kawasaki Voyager XII
70 Honda CL350 Cafe
Pages: [1]   Go Up
« previous next »