« previous next »
Pages: [1]   Go Down

Author Topic: How to rake a Honda  (Read 1812 times)

0 Members and 1 Guest are viewing this topic.

Offline D

  • Full Member
  • *
  • Posts: 26
  • 1979 CM185T, 1981 cb650c
How to rake a Honda
« on: March 14, 2010, 11:08:13 PM »
so i am wanting to rake my 650, I have been looking for a pre-made raked triple tree but haven't came across one yet. Also I haven't found much info here on raking bikes, did i overlook anyting any and all help is appreciated
thanks
dan
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: How to rake a Honda
« Reply #1 on: March 14, 2010, 11:13:06 PM »
There is no way in the world i would use raked clamps, they throw your trail out { often into negative trail} and can be extremely dangerous, probably why you can't buy any....  Rake the frame, it is a hell of a lot safer.. If done properly that is..

Mick

Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Jordan

  • Hot Shot
  • ***
  • Posts: 433
  • What a Long strange trip it's been
Re: How to rake a Honda
« Reply #2 on: March 15, 2010, 06:44:53 AM »
there is a site called chopperbuilders handbook there you will anything and everything you ever wanted to know about this kind of stuff.
Logged

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: How to rake a Honda
« Reply #3 on: March 15, 2010, 07:17:26 AM »
There is a Honda Chopper site, you may find what you are looking for there. It is a good site.
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline D

  • Full Member
  • *
  • Posts: 26
  • 1979 CM185T, 1981 cb650c
Re: How to rake a Honda
« Reply #4 on: March 15, 2010, 05:47:18 PM »
i will look into all those sites and post related info here, thanks for all the replys  ;D
Logged

Offline junkyardjon

  • Full Member
  • *
  • Posts: 34
Re: How to rake a Honda
« Reply #5 on: March 15, 2010, 06:18:56 PM »
Quote from: BobbyR on March 15, 2010, 07:17:26 AM
There is a Honda Chopper site, you may find what you are looking for there. It is a good site.

that site is for SOHC 750's only. if you post it's for a 650, it WILL be deleted.

raked tree's are for correcting trail, not for the raked out look. you will have neg trail. i know cause i've done it and ended up with -4 trail on a sohc 750. that's from a 10/10 setup.

the way i rake stock necks is, cut right behind the neck and wedge it. first i put a piece between the bottom of the neck and the gusset then insert the wedge.
Logged
Pages: [1]   Go Up
« previous next »