« previous next »
Pages: [1]   Go Down

Author Topic: buying sprockets cb750  (Read 737 times)

0 Members and 2 Guests are viewing this topic.

Offline 73nancy

  • Enthusiast
  • **
  • Posts: 149
buying sprockets cb750
« on: March 09, 2010, 08:09:48 PM »
ok guys looking at buying some new sprockets for my cafe project. i have already bought a ek x-ring chain now its time to buy sprockets. ive been thinking of running 17t front stock 48t rear. maily because i dont ride on the highway much. my question is where is a good place to buy sprockets. i dont want to get junk ones something quality. probally going for steel just cause its not a racer and all. if any body can tell me where they bought theres that would be great thanks
Logged
k1 cb750 cafe racer (aka Helter Skelter)
k6 cb750 stock daily rider project
k3 cb750 race bike 911 big bore, alum rods, 13:1, race cam other goodies

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: buying sprockets cb750
« Reply #1 on: March 09, 2010, 08:15:15 PM »
I usually get JT sprockets.  Z1 Enterprises sells them, as do many other bike parts places. 
Logged

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: buying sprockets cb750
« Reply #2 on: March 10, 2010, 05:10:01 AM »
Quote from: Gordon on March 09, 2010, 08:15:15 PM
I usually get JT sprockets.  Z1 Enterprises sells them, as do many other bike parts places. 

+1 same as Gordon -Z1 has fast shipping as well.
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,090
  • Sunny Central Florida
Re: buying sprockets cb750
« Reply #3 on: March 10, 2010, 05:19:41 AM »
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline 73nancy

  • Enthusiast
  • **
  • Posts: 149
Re: buying sprockets cb750
« Reply #4 on: March 10, 2010, 08:27:39 AM »
ok thanks guys just wanted to make sure i was buying a good brand for the ol'cb
Logged
k1 cb750 cafe racer (aka Helter Skelter)
k6 cb750 stock daily rider project
k3 cb750 race bike 911 big bore, alum rods, 13:1, race cam other goodies

Offline Inigo Montoya

  • Master
  • *****
  • Posts: 1,855
Re: buying sprockets cb750
« Reply #5 on: March 10, 2010, 10:49:36 AM »
Got some from mawonline.com and they were a good price. I cant remember if they were jt or sunstar though.
just another option.
Logged
Pages: [1]   Go Up
« previous next »