« previous next »
Pages: [1]   Go Down

Author Topic: just making sure before i drop this head off at the machine shop monday  (Read 525 times)

0 Members and 1 Guest are viewing this topic.

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
just making sure before i drop this head off at the machine shop monday
« on: March 13, 2010, 08:26:35 PM »
i am dropping my 75 750f head at the machine shop monday am to get .020 milled off the deck surface as long as none of the folks that know these bikes better than me say it's ok.
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,938
  • Bought her new 4/75
Re: just making sure before i drop this head off at the machine shop monday
« Reply #1 on: March 13, 2010, 10:22:27 PM »
Why that number? I think mine have been milled .010 and .009. Check with Mike. He had both of mine done.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline bucky katt

  • Old Timer
  • ******
  • Posts: 4,564
  • i am a pastafarian!
    • facebook
Re: just making sure before i drop this head off at the machine shop monday
« Reply #2 on: March 13, 2010, 10:43:56 PM »
ya know. i've asked him before, twice maybe. my memory sucks, i dont even remember where i wrote the numbers down  :P i'm just looking for a little more compression to go with the 77 750f cam i'm installing.
Logged
Of all God's creatures there is only one that cannot be made the slave of the lash. That one is the cat. If man could be crossed with the cat it would improve man, but it would deteriorate the cat.
Mark Twain - Notebook, 1894
Pages: [1]   Go Up
« previous next »