« previous next »
Pages: [1]   Go Down

Author Topic: front brake on drag bars... no room  (Read 1762 times)

0 Members and 1 Guest are viewing this topic.

Offline jbrick28

  • Full Member
  • *
  • Posts: 48
  • ell yeah
front brake on drag bars... no room
« on: March 23, 2010, 01:28:41 PM »
i put drag bars on my 750 and i have the tubes pushed through the trees a little and was wondering if there was a different front brake lever i could use that would take up less room so i dont have to take the bikes front end back to stock height.
Logged
just cause i talk slow dont mean im stupid

Offline Laminar

  • Retsam
  • Master
  • *****
  • Posts: 1,632
Re: front brake on drag bars... no room
« Reply #1 on: March 23, 2010, 02:28:33 PM »
Is the lever the problem, or is it the master cylinder?
Logged

Offline jbrick28

  • Full Member
  • *
  • Posts: 48
  • ell yeah
Re: front brake on drag bars... no room
« Reply #2 on: March 24, 2010, 04:41:19 AM »
Quote from: Laminar on March 23, 2010, 02:28:33 PM
Is the lever the problem, or is it the master cylinder?
its the master. it would work fine if i raised the front end where its supposed to be but im too damn short and im trying to lower it as much as possible.
Logged
just cause i talk slow dont mean im stupid

traveler

  • Guest
Re: front brake on drag bars... no room
« Reply #3 on: March 24, 2010, 04:44:23 AM »
push the throttle housing out.

~Joe
Logged

Offline KB02

  • Take it easy there, Sonny, I'm an
  • Old Timer
  • ******
  • Posts: 3,760
Re: front brake on drag bars... no room
« Reply #4 on: March 24, 2010, 05:32:26 AM »
I wish I could find a picture of it, but I (okay, my Dad did it) built little bar extenders for the clip ons that I got for my 750F1 cafe bike. It brought the master out far enough that it cleared everything. I then replaced the MC with an aftermarket one and that gave a bunch more room, too.
Logged
1978 CB750K Project
2000 Ducati ST2
...and a pedal bike

Join the AMA today!!

My project thread Part I: K8 Project "Parts Bike"
My project thread Part II: Finishing (yeah, right) touches on Project "Parts Bike"

Offline wingman

  • Enthusiast
  • **
  • Posts: 113
Re: front brake on drag bars... no room
« Reply #5 on: March 24, 2010, 05:48:49 AM »
I had the same problem with the 350f - I am super short and eventually had to switch to different handlebars.

Wingman
Logged
1972 CB350F - Who needs TV?  I have a motorcycle in my living room! http://forums.sohc4.net/index.php?topic=67528.0

Offline bikerbart

  • Master
  • *****
  • Posts: 1,579
Re: front brake on drag bars... no room
« Reply #6 on: March 24, 2010, 06:57:07 AM »
drag bars are really bad for your wrists.You will see after about 45 min of riding.Puts them at an angle that isnt natural.you will see.
Logged
its better to regret something you have done,than something you havent.Except playing with explosives.

Offline 75cb550 (kyle)

  • so you're calling me a
  • Hot Shot
  • ***
  • Posts: 592
  • KEEP YOUR BOOGER HOOK OFF THE BANG SWITCH
    • My Album
Re: front brake on drag bars... no room
« Reply #7 on: March 24, 2010, 07:05:12 AM »
we originally put some drag bars on the goldwing bobber. once we have everything mounted it looked to cramped and we had clearance issues with tank. he ended up using my stock CB550 bars and i used his stock GL1000 bars. the swap pretty nice. he just pulled the stock CB bars farther back. of course that wont work with yours. so i guess im just rambling on.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: front brake on drag bars... no room
« Reply #8 on: March 24, 2010, 07:27:25 AM »
Shorten your tubes, or shorten the stock MC.

You can exrend the bar a bit too (under the throttle housing)
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way
Pages: [1]   Go Up
« previous next »