« previous next »
Pages: [1]   Go Down

Author Topic: 350f float bowl 'gasket'  (Read 743 times)

0 Members and 1 Guest are viewing this topic.

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,810
  • bike in a box
350f float bowl 'gasket'
« on: March 29, 2010, 04:00:06 AM »
This overhaul kit shows an o-ring that must be for fitting in  the rim of the float bowl. (duh?)

Anyone know what size it is?  I know that by trying them all there is probably one (or four) around , and I have the upper gaskets already, so why buy a kit with all the perfectly usable  parts I have collected?

« Last Edit: March 29, 2010, 04:03:52 AM by poor boi »
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline Kevin400F

  • Hot Shot
  • ***
  • Posts: 600
Re: 350f float bowl 'gasket'
« Reply #1 on: March 29, 2010, 04:21:46 AM »
I use 2mm Buna-N O-ring cord, laid in the groove and cut to fit, with the ends bonded with cyanoacrylate (regular "super glue").  If you need a length of cord, or some bowl gasket rings made as described, let me know.
Logged
Pages: [1]   Go Up
« previous next »