« previous next »
Pages: 1 ... 34 35 [36] 37 38 ... 42   Go Down

Author Topic: 1977 cb750f2 (915cc)  (Read 240740 times)

0 Members and 7 Guests are viewing this topic.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: 1977 cb750f2 (915cc)
« Reply #875 on: October 22, 2013, 08:26:35 PM »
Nope
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: 1977 cb750f2 (915cc)
« Reply #876 on: October 22, 2013, 08:36:54 PM »
Quote from: cgarbe on October 22, 2013, 01:35:24 PM
Really! That surprises me...is there much vibration on the muffler end at high revs?
Not as much as a rowdy twin. On a four it works well without a rear bracket.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: 1977 cb750f2 (915cc)
« Reply #877 on: October 26, 2013, 07:31:38 AM »
cb750 is correct,  not attachment to the bike except the head on the Yamiya and similar exhaust.
Quote from: cgarbe on October 22, 2013, 12:48:42 PM
tweakin:

I know you now have the Kerker on your bike, but how did the Yamiya exhaust attach to the bike for support? I'm thinking about buying the same exact exhaust as you did for my 1978 Honda cb750f and I couldn't see how it actually was supported. Do you have any pics of that?

Awesome bike man!

Chris
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: 1977 cb750f2 (915cc)
« Reply #878 on: November 03, 2013, 05:26:52 PM »
So after my second Dyna 2000 crapped out on me I decided to move away from it.  Issues start to come up 2X after being stuck in traffic during warm weather. like the pick ups fail in high heat.  I am going to give the Pamco a try since I have read many positive reviews and first hand knowledge from BrandEn.  I should have listened to you after my first gave out B! 

Messing around with the 915 gave me new found motivation I lost after starting to dirtbike again, so I decided to make some small cosmetic changes.  Went back to the MotoGP pipe again wanting to try out the new design.  After seeing BrandEn's in person, it made me miss the stainless pipe I originally had.  Also have some smoothed machined aluminum points / clutch covers and smaller black headlight in the mail.




I am not getting rid of the Kerker, but will be nice to have options.
« Last Edit: November 03, 2013, 05:28:45 PM by tweakin »
Logged

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: 1977 cb750f2 (915cc)
« Reply #879 on: November 03, 2013, 06:03:50 PM »
Quote from: tweakin on November 03, 2013, 05:26:52 PM
So after my second Dyna 2000 crapped out on me I decided to move away from it.  Issues start to come up 2X after being stuck in traffic during warm weather. like the pick ups fail in high heat.  I am going to give the Pamco a try since I have read many positive reviews and first hand knowledge from BrandEn.  I should have listened to you after my first gave out B! 

I swapped out my Dyna for a Pamco too.
Been very pleased with the Pamco performance so far.
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,591
  • Gusto mo titi ko?
    • project
Re: 1977 cb750f2 (915cc)
« Reply #880 on: November 03, 2013, 06:09:21 PM »
what issues are you having with the dyna?  i am kinda interested in it if you want to get rid of it...
Logged

Offline CB750R

  • Hot Shot
  • ***
  • Posts: 609
  • 77 CB750F
Re: 1977 cb750f2 (915cc)
« Reply #881 on: November 03, 2013, 06:12:20 PM »
Howdy, must say I've read a great deal of the progress on your bike and it looks and sounds like quite a nice machine! 

I'm in the midst of refreshing my 77 f2, and would like to hear your opinion on the motowerks vs yamiya vs kerker systems.   

It sounds like the motowerks doesn't work with the f's extra cooling puck for the oil filter? How did you plumb the oil cooler if that's the case?

Yamiya vs motowerks? Sound fit finish impressions? 

Thanks.
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: 1977 cb750f2 (915cc)
« Reply #882 on: November 03, 2013, 07:32:33 PM »
I am looking forward to trying out the Pamco, fingers crossed for no issues.
Quote from: FunJimmy on November 03, 2013, 06:03:50 PM
Quote from: tweakin on November 03, 2013, 05:26:52 PM
So after my second Dyna 2000 crapped out on me I decided to move away from it.  Issues start to come up 2X after being stuck in traffic during warm weather. like the pick ups fail in high heat.  I am going to give the Pamco a try since I have read many positive reviews and first hand knowledge from BrandEn.  I should have listened to you after my first gave out B! 

I swapped out my Dyna for a Pamco too.
Been very pleased with the Pamco performance so far.
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: 1977 cb750f2 (915cc)
« Reply #883 on: November 03, 2013, 07:33:17 PM »
Quote from: Medyo Bastos on November 03, 2013, 06:09:21 PM
what issues are you having with the dyna?  i am kinda interested in it if you want to get rid of it...
pick ups melt down internally, would not think of selling them.  sorry...
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: 1977 cb750f2 (915cc)
« Reply #884 on: November 03, 2013, 07:36:13 PM »
Yes, clearance issues with the F2, not enough spacing.  I am using a spin on filter that is tapped to run an oil cooler.  The Yamiya and Kerker work fine with the standard F2 set up.  I just like the stainless finish of the MotoGP pipe, but will also be holding on to the Kerker.  The Yamiya finish isn't the best IMO, chromex finish isn't very durable.
Quote from: CB750R on November 03, 2013, 06:12:20 PM
Howdy, must say I've read a great deal of the progress on your bike and it looks and sounds like quite a nice machine! 

I'm in the midst of refreshing my 77 f2, and would like to hear your opinion on the motowerks vs yamiya vs kerker systems.   

It sounds like the motowerks doesn't work with the f's extra cooling puck for the oil filter? How did you plumb the oil cooler if that's the case?

Yamiya vs motowerks? Sound fit finish impressions? 

Thanks.
Logged

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: 1977 cb750f2 (915cc)
« Reply #885 on: November 03, 2013, 08:45:28 PM »
Looks great man, I am sure you will be happy with the Pamco.
Logged

Offline SOHC Digger

  • I'm not an
  • Expert
  • ****
  • Posts: 1,171
Re: 1977 cb750f2 (915cc)
« Reply #886 on: November 04, 2013, 05:01:37 AM »
I don't know how I missed this build up until now.  Excellent bike, Man!!!  Well done!
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: 1977 cb750f2 (915cc)
« Reply #887 on: November 04, 2013, 08:17:08 AM »
Quote from: SOHC Digger on November 04, 2013, 05:01:37 AM
I don't know how I missed this build up until now.  Excellent bike, Man!!!  Well done!

Quote from: brandEn on November 03, 2013, 08:45:28 PM
Looks great man, I am sure you will be happy with the Pamco.

Thanks fella's.   B- I guess coming up and seeing the new build did motivate me again.   Felt great getting back into the shop this weekend.
Logged

Offline cgarbe

  • Enthusiast
  • **
  • Posts: 213
Re: 1977 cb750f2 (915cc)
« Reply #888 on: November 04, 2013, 10:53:48 AM »
where can I get the MotoGP pipes? Love the look of them!
Logged
1975 Honda CB400F
1978 Honda CB750F

Offline CB750R

  • Hot Shot
  • ***
  • Posts: 609
  • 77 CB750F
Re: 1977 cb750f2 (915cc)
« Reply #889 on: November 04, 2013, 12:36:40 PM »
The shop is motogp werks. They have a project gallery, and if you email them
 I just did they have one left in stock. I'm going to hold off for now as my stock header still works and looks fine. And I can change my oil with it on.

Red@motogpwerks.com  the guys name is Chris.

Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: 1977 cb750f2 (915cc)
« Reply #890 on: November 04, 2013, 02:42:38 PM »
Interesting This is taken off Chris's ebay shop....

Quote
WE JUST BROUGHT OUT MOTOWORKS EXHAUST COMPANY SO ALL BENDING NOW IS DONE IN HOUSE

http://www.ebay.com/itm/HONDA-CB550-500-CB500-CB-500-K-F-EXHAUST-STAINLESS-MOTOGPWERKS-CAFE-RACER-SOHC-/111205759499?pt=Motorcycles_Parts_Accessories&hash=item19e4613a0b
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline CB750R

  • Hot Shot
  • ***
  • Posts: 609
  • 77 CB750F
Re: 1977 cb750f2 (915cc)
« Reply #891 on: November 04, 2013, 05:34:20 PM »
I wonder if we ask nicely, if the next batch can be made with a bit more clearance for the oil filter housing!

Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: 1977 cb750f2 (915cc)
« Reply #892 on: November 04, 2013, 09:36:10 PM »
Quote from: CB750R on November 04, 2013, 05:34:20 PM
I wonder if we ask nicely, if the next batch can be made with a bit more clearance for the oil filter housing!

Doesn't really bother me but thats not as silly as it sounds for the guys that don't like removing the pipes... ;D ;)   You can only ask and he can only say no.... :P
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: 1977 cb750f2 (915cc)
« Reply #893 on: November 05, 2013, 06:02:50 AM »
Quote from: Retro Rocket on November 04, 2013, 09:36:10 PM
Quote from: CB750R on November 04, 2013, 05:34:20 PM
I wonder if we ask nicely, if the next batch can be made with a bit more clearance for the oil filter housing!

Doesn't really bother me but thats not as silly as it sounds for the guys that don't like removing the pipes... ;D ;)   You can only ask and he can only say no.... :P

He will say no... ;D :P  Kind of like asking an artist to change the color of his paining.
Logged

Offline wannabridin

  • Patience made me a
  • Master
  • *****
  • Posts: 2,237
  • -Garrett
    • 1976 CB750K, under construction:
Re: 1977 cb750f2 (915cc)
« Reply #894 on: November 05, 2013, 10:17:06 AM »
Who did the uholstery on your seat?  I must have missed that one...
Logged
1976 CB750K, currently under construction:
http://forums.sohc4.net/index.php?topic=64468.0

-And if you don't do it this year, you'll be one year older when you do...

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: 1977 cb750f2 (915cc)
« Reply #895 on: November 05, 2013, 10:38:21 AM »
Quote from: wannabridin on November 05, 2013, 10:17:06 AM
Who did the uholstery on your seat?  I must have missed that one...
Mac's in Ballard (Seattle) WA did it.  More than happy with the results.
Logged

Offline Kemp

  • Hot Shot
  • ***
  • Posts: 261
Re: 1977 cb750f2 (915cc)
« Reply #896 on: November 05, 2013, 12:23:12 PM »
I had the same problem with my Dyna S on a CB550 build. The pick up for cyl 1&4 would fail once the motor got hot. This Dyna was almost new when it failed.
Logged

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: 1977 cb750f2 (915cc)
« Reply #897 on: November 10, 2013, 03:59:37 PM »
Switched over to Pamco from dyna 2000 and added a relay to the coils and added the stainless Moto GP pipe.  Runs great and super strong, hopefully no more failing pickups.  Still getting a bit of smoke when I get on it a bit (5000rpms in video)  any suggestions to the cause?  Just added new valve seals, compression is great and runs strong.


cb750 915 with Moto GP pipe

Also swapped to a black headlight, old one was chrome, what do you think?



Logged

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: 1977 cb750f2 (915cc)
« Reply #898 on: November 10, 2013, 04:02:21 PM »
What headlight is that? Looks way better. Sounds awesome!
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: 1977 cb750f2 (915cc)
« Reply #899 on: November 10, 2013, 04:43:18 PM »
Looks and sounds great, the little puff of smoke could just be fuel Tweakin, was the bike warm..?  I don't think i would be too worried about it ...
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.
Pages: 1 ... 34 35 [36] 37 38 ... 42   Go Up
« previous next »