« previous next »
Pages: [1]   Go Down

Author Topic: CL350 bottom end question  (Read 1014 times)

0 Members and 1 Guest are viewing this topic.

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
CL350 bottom end question
« on: April 30, 2010, 11:18:41 AM »
Anyone know if there is any difference between bottom ends of the 72 (3xxxxxx - 4xxxxxx) and the 73 (5xxxxxx) cl/cb350's?
Logged
No.

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Re: CL350 bottom end question
« Reply #1 on: April 30, 2010, 02:19:43 PM »
What part(s) specifically, Mark??
Logged
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: CL350 bottom end question
« Reply #2 on: April 30, 2010, 02:22:08 PM »
Everything beneath the jugs. :)
Logged
No.

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Re: CL350 bottom end question
« Reply #3 on: April 30, 2010, 02:34:19 PM »
I believe it's all the same - I think they may have changed the logo on the alternator cover, that's about it.
In fact, some of the tranny parts are shared with CB500/550F......
Logged
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: CL350 bottom end question
« Reply #4 on: April 30, 2010, 03:00:05 PM »
OK, good news.

Thank ya.
Logged
No.

Pages: [1]   Go Up
« previous next »