« previous next »
Pages: [1]   Go Down

Author Topic: In need of a centerstand  (Read 1320 times)

0 Members and 1 Guest are viewing this topic.

Offline King_Panther13

  • Full Member
  • *
  • Posts: 49
In need of a centerstand
« on: May 09, 2010, 04:59:03 PM »
 Hello all,

 My bike is a bit of a hodge-podge. 1981 (or so I think) nighthawk wheels and front end, and a 1973 CB500 frame (with a '78 CB550 engine, but that's off of the point).

 I did a lot of googling for a centerstand, but could not find anything. I'm wondering what other centerstand models will fit the 1973 CB500 frame (With the different wheels, if they make a difference at all). Also I have a 4-1 Kerker exhaust system, which I doubt will make a difference, but it doesn't hurt to toss that in there.

 A new sidestand wouldn't hurt either, the current one was homemade by the PO...it's a long piece of metal with a socket welded to the end. It works great (better than a normal stand imo) but it looks tacky as hell, and sometimes doesn't want to stay up.
Logged

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: In need of a centerstand
« Reply #1 on: May 09, 2010, 06:59:39 PM »
Quote from: King_Panther13 on May 09, 2010, 04:59:03 PM
Hello all,

 My bike is a bit of a hodge-podge. 1981 (or so I think) nighthawk wheels and front end, and a 1973 CB500 frame (with a '78 CB550 engine, but that's off of the point).

 I did a lot of googling for a centerstand, but could not find anything. I'm wondering what other centerstand models will fit the 1973 CB500 frame (With the different wheels, if they make a difference at all). Also I have a 4-1 Kerker exhaust system, which I doubt will make a difference, but it doesn't hurt to toss that in there.

 A new sidestand wouldn't hurt either, the current one was homemade by the PO...it's a long piece of metal with a socket welded to the end. It works great (better than a normal stand imo) but it looks tacky as hell, and sometimes doesn't want to stay up.

You can use motogrid to do a parts look up like that.  I looked up a K2 (don't know if that's your bike or not for sure) and here's what came up:
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline Wtrdog

  • Full Member
  • *
  • Posts: 43
Re: In need of a centerstand
« Reply #2 on: June 15, 2010, 12:35:57 PM »
i have a center stand that I believe is for a 76 CB550.  If it fits (need to know what measurements you need) i'll take $30 plus shipping.  i can take a pic of it next to my 76 so you can get an idea.  Let me know
Logged

Offline Wtrdog

  • Full Member
  • *
  • Posts: 43
Re: In need of a centerstand
« Reply #3 on: June 15, 2010, 01:28:02 PM »
Pics

Logged

Offline cgancos

  • Full Member
  • *
  • Posts: 60
    • Flickr Page
Re: In need of a centerstand
« Reply #4 on: June 15, 2010, 02:53:10 PM »
Actually, I might have one from that exact frame, so if Wtrdog's doesn't work, I could dig mine out.
Logged
Pages: [1]   Go Up
« previous next »