« previous next »
Pages: [1]   Go Down

Author Topic: exhaust baffle question  (Read 924 times)

0 Members and 1 Guest are viewing this topic.

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
exhaust baffle question
« on: November 09, 2010, 01:23:21 PM »
i bought a 4 to 1 exhaust and i found out afterwards it does not have a baffle so measured the size of the inner diameter of the pipe and it is 1.85 inches and the only sizes that i have been able to find was 1.5, 1.75, and 2 inch baffles. which size do i need to get and how should i install it?
Logged
“Experience is the name every one gives to their mistakes.” Oscar Wilde

Offline orkid1989

  • Hot Shot
  • ***
  • Posts: 344
  • “Life is too important to be taken seriously.”
Re: exhaust baffle question
« Reply #1 on: November 09, 2010, 02:44:58 PM »
actually cancel the measurement of 1.85. i took the pipe off and measured where the headers connected to the tip/muffler and it is 2 inches. my question now is which baffle should i get and also should i wrap it in fiberglass for a better sound?
Logged
“Experience is the name every one gives to their mistakes.” Oscar Wilde

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,358
Re: exhaust baffle question
« Reply #2 on: November 09, 2010, 06:13:10 PM »
Have a look at http://www.crc2onlinecatalog.com/baffles.htm

Maybe make a phone call? their number is on the homepage http://www.crc2onlinecatalog.com/index.html

I'd wrap a baffle for better sound only after hearing it on my bike unwrapped.
Logged
Pages: [1]   Go Up
« previous next »