« previous next »
Pages: [1]   Go Down

Author Topic: Another side cover repiar  (Read 3478 times)

0 Members and 1 Guest are viewing this topic.

Offline Tom in Newcastle......Ontario

  • Hot Shot
  • ***
  • Posts: 522
  • Newcastle Ontario
Another side cover repiar
« on: April 19, 2010, 05:49:11 pm »
Saw this on my neighbors cm200 Twinstar.......should work on alot of covers if you have enough material to epoxy to....might have to grind a bevel on the alan screw to have a bit of a lead in
Logged
1978 cb 550k......stock,my first re-build


Loud pipes suck.......

If you buy something.........pay for it !
If you sell something .......ship it !
If you say you are going to do something......do it !
If you have a question about something......ask it !
When the seller answers ........let him know whether you still want it or not !
If you receive something .....let the seller know you got it !
If you get something and are happy/un happy with it .....let the giver/seller know !
If you have any kind of issue,shipping/receiving/quality/price/shipping charges etc !
Communicate

Offline BeSeeingYou

  • Old Timer
  • ******
  • Posts: 3,913
Re: Another side cover repiar
« Reply #1 on: April 20, 2010, 10:26:42 am »
Is that allen screw used in place of a broken tab?  Good idea.  If you want to be able to remove it just give the screw a shot of WD40 before you set it in the epoxy and back it out after hardening and you will have cast in place threads.
« Last Edit: April 21, 2010, 08:07:04 pm by srust58 »
Logged

Offline Tex

  • Full Member
  • *
  • Posts: 28
Re: Another side cover repiar
« Reply #2 on: June 14, 2010, 06:53:20 pm »
Thanks I was tring to think of a way to fix my side covers and now I can thanks again guys ;)
Logged
Pages: [1]   Go Up
« previous next »