« previous next »
Pages: 1 [2]   Go Down

Author Topic: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)  (Read 8730 times)

0 Members and 1 Guest are viewing this topic.

Offline kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,160
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #25 on: May 24, 2010, 02:48:36 PM »
SENT...the nice lady at the post office said you should look for it on Thursday. 

She didn't say it would arrive on Thursday, just that you could look for it.   

glad I could help, kerry.
Logged
intrigued by the wail...seduced by the scream.

Offline Kevin400F

  • Hot Shot
  • ***
  • Posts: 600
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #26 on: May 24, 2010, 02:57:03 PM »
I use 5.8mm ID x 1.9mm cross-section O-rings.
Logged

Offline midnightrider

  • Out of the SOHC4 world for a while...
  • Enthusiast
  • **
  • Posts: 154
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #27 on: May 26, 2010, 09:07:55 AM »
You're a saint, Kerry.  Thanks.
Logged
1972 CB350 Four - "The Green Hornet"
http://forums.sohc4.net/index.php?topic=84975.0


I love being alive and I will be the best man I possibly can; I will take love wherever I find it and offer it to everyone who will take it... seek knowledge from those wiser and teach those who wish to learn from me.
-- Duane Allman's epitaph

Offline midnightrider

  • Out of the SOHC4 world for a while...
  • Enthusiast
  • **
  • Posts: 154
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #28 on: June 02, 2010, 05:47:43 PM »
Quote from: kerryb on May 24, 2010, 02:48:36 PM
SENT...the nice lady at the post office said you should look for it on Thursday. 

She didn't say it would arrive on Thursday, just that you could look for it.   

glad I could help, kerry.

Awesome job, Kerry!  The fuel pipe you made works great!

Thank you so much; you're a lifesaver.


Logged
1972 CB350 Four - "The Green Hornet"
http://forums.sohc4.net/index.php?topic=84975.0


I love being alive and I will be the best man I possibly can; I will take love wherever I find it and offer it to everyone who will take it... seek knowledge from those wiser and teach those who wish to learn from me.
-- Duane Allman's epitaph

Offline BlitzAttack

  • Full Member
  • *
  • Posts: 2
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #29 on: September 02, 2014, 02:22:15 PM »
Well looks like I have two of these that are broken just like yours. Anybody have any leads on where you can find these? I dont have access to a mill so I cant make anymore.

Thanks
Logged

Offline harisuluv

  • Master
  • *****
  • Posts: 2,009
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #30 on: September 02, 2014, 02:31:52 PM »
I have been making them for awhile.  I sell them for $40 shipped a pair.

Logged

Offline BlitzAttack

  • Full Member
  • *
  • Posts: 2
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #31 on: September 02, 2014, 03:23:04 PM »
PM sent

Thanks
Logged

Offline saha6818

  • Full Member
  • *
  • Posts: 25
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #32 on: August 01, 2015, 06:01:38 PM »
Bump! I'm rebuilding a CB350F for my girlfriend, and one of these little dongles is broken. I made another out of a vinyl spacer, and it holds, but I'm concerned that the gas will eventually eat the vinyl. I messaged harisuluv with no response after a few days (time is tight). Does anyone have a source? eBay doesn't seem to do much volume with these. There's a set listed now, and I'll probably move on that soon. Does anyone know a source? The many other parts I've needed were a breeze finding.

THANKS!
Logged

Offline harisuluv

  • Master
  • *****
  • Posts: 2,009
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #33 on: August 01, 2015, 07:19:28 PM »
Don't see a PM, sure you sent it?  I don't really make them anymore, but I have a few spare OEM ones.
Logged

Offline Black Betty

  • Full Member
  • *
  • Posts: 1
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #34 on: August 21, 2015, 11:30:10 AM »
Does anyone still make or have extras of these fuel pipes by chance?  :-\ One of mine just snapped in half cause it was so dry rotted. Need one but would love to replace all.
Logged

Offline kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,160
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #35 on: August 23, 2015, 01:57:52 PM »
Did you check with harrisulov?  If he doesn't have one I could make some more.  Let me know.

Logged
intrigued by the wail...seduced by the scream.

Offline przjohn

  • Expert
  • ****
  • Posts: 948
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #36 on: August 23, 2015, 02:56:06 PM »
Quote from: harisuluv on September 02, 2014, 02:31:52 PM
I have been making them for awhile.  I sell them for $40 shipped a pair.

That is good to know as last time I had to pay the Ebay ransom for a few.
Logged
I like poetry, long walks on the beach, and poking at dead things with a stick.

Offline tycmitchell

  • Full Member
  • *
  • Posts: 10
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #37 on: August 29, 2015, 10:29:35 AM »
Quote from: kerryb on August 23, 2015, 01:57:52 PM
Did you check with harrisulov?  If he doesn't have one I could make some more.  Let me know.
I could use a set.  One of mine seemed to be leaking and I managed to easily snap that sucker in half.  Maybe a good cleaning and rebuild is a better idea.  Might have to contact harisulov.  My carbs are pretty rough.

Sent from my HTCONE using Tapatalk
« Last Edit: August 29, 2015, 11:13:43 AM by tycmitchell »
Logged

Offline TheSkids

  • Full Member
  • *
  • Posts: 3
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #38 on: August 11, 2020, 10:49:05 PM »
Another CB400F with a broken Fuel Pipe. The PO snapped it and tried fixing with JB Weld and then glued the pieces into the carbs 🤦‍♂️. Any leads anyone? I know it’s a long shot since this was 10 years ago.
Logged

Offline TheSkids

  • Full Member
  • *
  • Posts: 3
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #39 on: August 11, 2020, 11:00:53 PM »
Actually i just read that PETG is gas and chemical resistant. I guess i will try 3D printing a new fuel pipe until 4into1 gets more aluminum ones in stock.
Logged

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,184
  • CB500 Number 1000036
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #40 on: August 12, 2020, 12:54:02 AM »
You may find that the "odd" metric size is an exact imperial size, worth cross checking
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline TheSkids

  • Full Member
  • *
  • Posts: 3
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #41 on: August 12, 2020, 11:01:12 AM »
I did a quick design and print and it appears to work. Fits snug. I had to print it horizontally to maximize the strength of the piece, so its not the prettiest. If it holds up well, I will post the .STL file so anyone else with this problem can print their own. Obviously the best solution will be to buy aluminum fittings when they get back in stock on 4into1.com
Logged

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,855
Re: Carb Leak between #2 and #1 - broken "fuel pipe" (plastic fuel connection)
« Reply #42 on: August 12, 2020, 11:33:26 AM »
dayyyyyyyum.......you know I have a leak about that same spot on my 350F.

carbs are coming off again for umpteenth time.
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.
Pages: 1 [2]   Go Up
« previous next »