« previous next »
Pages: [1]   Go Down

Author Topic: Does NE1 Make/Sell/Have 4 Into 2 Headers?  (Read 1281 times)

0 Members and 1 Guest are viewing this topic.

Old_Beater

  • Guest
Does NE1 Make/Sell/Have 4 Into 2 Headers?
« on: February 02, 2006, 08:22:25 PM »
Can you fit a 4 into 2 header exhaust setup on a '76 CB750? :-\

What kind of cans would you use or can I go straight pipe? ;D
Logged

Offline jdpas29

  • Hot Shot
  • ***
  • Posts: 251
  • my bike is 100% sandcast!!
    • My band = white bread
Re: Does NE1 Make/Sell/Have 4 Into 2 Headers?
« Reply #1 on: February 02, 2006, 08:25:05 PM »
i have 4 into 2s on my 78 750.. i'm pretty sure it can be done on yours.  MAC is the most common brand for replacements on these bikes.
Logged
cars are gay.

Old_Beater

  • Guest
Re: Does NE1 Make/Sell/Have 4 Into 2 Headers?
« Reply #2 on: February 02, 2006, 08:28:03 PM »
Do they have a website?

What are they're prices like?
Logged

Offline 6adan

  • Hot Shot
  • ***
  • Posts: 421
Re: Does NE1 Make/Sell/Have 4 Into 2 Headers?
« Reply #3 on: February 03, 2006, 05:27:02 AM »
Look on Ebay or Dennis Kirk has them. Dannie
Logged
1970 CB750 JDM,1975 GL1000, 1979 GL1000, 1979 CBX, 1995 GL1500, 2000 GL1500CT Valkyrie, 2008 GL1800 Trike.

Old_Beater

  • Guest
Re: Does NE1 Make/Sell/Have 4 Into 2 Headers?
« Reply #4 on: February 07, 2006, 10:14:41 PM »
Anyone else? :-\
Logged

Offline Cvillechopper

  • Is just pretending to be an
  • Expert
  • ****
  • Posts: 1,184
  • If not for my failures I'd never know my limits
Re: Does NE1 Make/Sell/Have 4 Into 2 Headers?
« Reply #5 on: February 08, 2006, 09:50:21 AM »
I made some using the top 6 inches of the stock pipes and heading to the local exhaust shop for their trash pieces.  They don't look perfect, but mine is a rat bike so it's a good fit.  Once you find the pipes you'll be looking for jets to make her run right.  Find a friend with a welder and go to town :)

Logged
It is the mark of an educated mind to be able to entertain a thought without accepting it.  Aristotle

Old_Beater

  • Guest
Re: Does NE1 Make/Sell/Have 4 Into 2 Headers?
« Reply #6 on: February 08, 2006, 05:25:18 PM »
I own a mig welder but I want CHROME! :P


So after market is my only option.
Logged
Pages: [1]   Go Up
« previous next »