Topic: Turn signal Wiring HELP!!!!!!!!!!!!!!!

[fletcha221]

I'm selling my 1973 cb350f, and the buyer wants me to put signals back on it, I found the stock winker and relay. The winker has 2 prongs, and is a small rectangle. The relay is round and has 2 prongs. The wiring diagram shows 3 wires going to the winker (green, black, and grey). However, it only has 2 prongs? Also, where does the relay go? It is not pictured in the diagram. I'm really at a loss here guys, any help would be much appreciated.

Kind Regards,

-Christian

[jessezm]

The black and gray wires plug into the relay, and the green goes to your frame ground.

[fletcha221]

What about the winker? hahaha I have the round relay, then a rectangle winker???

[fletcha221]

ANYONE? I'm LOST!

[Gordon]

There should only be one component associated with the blinkers.

[fletcha221]

I had 2 harnesses..........one off a 73, one was a 74, was one year a Round relay, and the other a rectangle?

[IndyFour]

Often times people will replace the original rectangle Honda flasher when it dies with a round one simply because they are easily obtainable at the auto parts store for a few dollars.  The one with the round flasher/relay was probably replaced at some point.

[fletcha221]

Thanks guys! I'll let you know when I catch myself on fire! weeeeeeeeeeeeeeeee