Author Topic: 1981 Master Cylinder onto 1972?  (Read 614 times)

0 Members and 2 Guests are viewing this topic.

Offline Mat

  • Full Member
  • *
  • Posts: 15
1981 Master Cylinder onto 1972?
« on: June 19, 2010, 05:57:10 PM »
I'm rebuilding a 1972 cb750 from the ground up. The master cylinder has problems and I found one from a 1981 cb750K on eBay, and was wondering if they are interchangeable. Does the 1981 have a large enough reservoir for stock 1972 brakes? Thanks, Mat

Offline 333

  • Time for change
  • Really Old Timer ...
  • *******
  • Posts: 7,557
  • Mail List Member #162 - Call me Stan
Re: 1981 Master Cylinder onto 1972?
« Reply #1 on: June 19, 2010, 06:17:29 PM »
More like too large.  Without looking, doesn't the '81 have dual discs?  Or dual pistons?  Maybe both?
Go metric, every inch of the way!

CB350F0  "Scrouching Tiger"
CT70K0    "Sneezing Poodle"

www.alexandriaseaport.org

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: 1981 Master Cylinder onto 1972?
« Reply #2 on: June 19, 2010, 06:19:31 PM »
The reservoir is not the issue. Either has enough. The level goes down over time, you top it off.

The piston ratio is the issue. hard to say till you try it. Is it a 2 brake cylinder going on a 1 brake bike? Might seem a little harsh. If they were both 1 brake bikes, should be OK.
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,351
Re: 1981 Master Cylinder onto 1972?
« Reply #3 on: June 19, 2010, 07:01:12 PM »
It'll work but it may be a very differently operating system after you install the 81 m/c

Could be more sensitive, could be less.  Be sure you can get a rebuild kit for it before you buy, ebay is a clearinghouse for junk these days and some sellers are less than honest but remail within ebay's rules.

-A