« previous next »
Pages: 1 [2]   Go Down

Author Topic: making a custom fiberglass seatpan  (Read 9201 times)

0 Members and 3 Guests are viewing this topic.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,289
  • So, what do ya wanna talk about today?
Re: making a custom fiberglass seatpan
« Reply #25 on: March 25, 2006, 02:27:27 PM »
Quote from: paulages on March 24, 2006, 02:17:35 PM
terry,
me thinks thou does protest too much...?? ;)

Oh no, this forum is full of them! It's like waking up facedown with a hangover on Brokeback Mountain! Man that Bighorn beer make my butt hurt!!!! ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Frankenkit

  • Industrial Strength
  • Really Old Timer ...
  • *******
  • Posts: 6,525
  • 2012 CBR250R, 72 CL350, Member #4600
Re: making a custom fiberglass seatpan
« Reply #26 on: March 25, 2006, 03:59:19 PM »
Quote from: Terry in Australia on March 25, 2006, 02:27:27 PM
Quote from: paulages on March 24, 2006, 02:17:35 PM
terry,
me thinks thou does protest too much...?? ;)

Oh no, this forum is full of them! It's like waking up facedown with a hangover on Brokeback Mountain! Man that Bighorn beer make my butt hurt!!!! ;D

Ha!  Terry, from the jokes on the humor board, I dare say you have no need to fear wakin
 up facedown on Brokeback Mt.   b/c not even the Bighorn beer could make ya pretty enough for the Brokeback boys... ;D

Logged
"Moderation in all things - especially moderation. Too much moderation is excessive. The occasional excess is all part of living the moderate life."
2012 CBR250R "Black Betty"
1980 CB650c- (sold) Delilah
1973 CL350- Lola?
Quote from: The_Crippler on July 19, 2010, 07:58:02 PM
Sweet, bubbly, Buddha - Say it ain't so!!!
Stuff for sale

Offline Jonesy

  • Shop Rat
  • Old Timer
  • ******
  • Posts: 2,648
  • "Damn! These HM300 Pipes Are Expensive!!!"
Re: making a custom fiberglass seatpan
« Reply #27 on: March 25, 2006, 05:17:08 PM »
Quote from: Kitsune84 on March 25, 2006, 03:59:19 PM
...not even the Bighorn beer could make ya pretty enough for the Brokeback boys... ;D

From the "Humor board" posts, I thought it was the sheep he had to worry about.... ;D :D
Logged
"Every time I start thinking the world is all bad, then I start seeing people out there having a good time on motorcycles; it makes me take another look." -Steve McQueen

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,289
  • So, what do ya wanna talk about today?
Re: making a custom fiberglass seatpan
« Reply #28 on: March 26, 2006, 01:45:12 AM »
Quote from: Kitsune84 on March 25, 2006, 03:59:19 PM
Quote from: Terry in Australia on March 25, 2006, 02:27:27 PM
Quote from: paulages on March 24, 2006, 02:17:35 PM
terry,
me thinks thou does protest too much...?? ;)

Oh no, this forum is full of them! It's like waking up facedown with a hangover on Brokeback Mountain! Man that Bighorn beer make my butt hurt!!!! ;D

Ha!  Terry, from the jokes on the humor board, I dare say you have no need to fear wakin
 up facedown on Brokeback Mt.   b/c not even the Bighorn beer could make ya pretty enough for the Brokeback boys... ;D

Man, you know how to hurt a man's feelings mate, you saying I'm too ugly to be attractive to a gay cowboy? I'm devastated!  ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline paulages

  • Old Timer
  • ******
  • Posts: 3,876
  • 1976 cb735
    • DOOMTOWN RIDERS P.R.M.C.
Re: making a custom fiberglass seatpan
« Reply #29 on: May 03, 2006, 12:49:41 PM »
okay, here are some finished seat pictures. in the end: 3 layers of glass, resin body filler, then polyester glazing putty. haven't upholstered yet, but it is mounted and padded with waterproof foam.

the hinge was made utilizing the stock hinge point on the frame. with the help of my blacksmith friend, we welded a corresponding diameter tube to a flat bar, which became the mounting frame for the seat. i used washers to raise the seat just off of the frame and to level it.


Logged
paul
SOHC4 member #1050

1974 CB550 (735cc)
1976 CB550 (590cc) road racer
1973 CB750K3
1972 NORTON Commando Combat
1996 KLX650 R

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: making a custom fiberglass seatpan
« Reply #30 on: May 03, 2006, 01:08:35 PM »
Looks good man.
Logged

Offline ProTeal55

  • Old Timer
  • ******
  • Posts: 4,887
  • Est1968.com
    • Joe's Barbershop Chicago
Re: making a custom fiberglass seatpan
« Reply #31 on: May 03, 2006, 01:15:00 PM »
How much you charging for those bad boys ???
Logged
Joe a.k.a ProTeal55 a.k.a JoeyCocks a.k.a Maker of Friends

Offline clarkjh

  • Expert? If only.
  • Expert
  • ****
  • Posts: 1,385
  • Surely and Samson are now Co-habitating
Re: making a custom fiberglass seatpan
« Reply #32 on: May 03, 2006, 02:45:25 PM »
Cool

James
Logged
SOHC/4 #3328
SOHC/4 Gallery: http://www.sohc4.us/gallery/v/members/personal/clarkjh/
1974 CB550, 40000 Miles
1980 GL1100, 102789 KM - Back on the road after a complete engine rebuild. 
*** Why, oh why, is it always head gaskets with me?***

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: making a custom fiberglass seatpan
« Reply #33 on: May 03, 2006, 04:09:41 PM »
Very nice! This is the sort of thing that comes to mind when I think of the creative and imaginative efforts I've seen from members.  ;)
Logged
We'll all be someone else's PO some day.

Offline cben750f0

  • nothin draws attention like a classic bike!!
  • Master
  • *****
  • Posts: 1,612
  • '75 CB750F0 Gladstone NQLD OZ
Re: making a custom fiberglass seatpan
« Reply #34 on: May 04, 2006, 12:46:19 AM »
man thats a top effort!!!... congrats... you must be happy with it...peace
Logged
you are never to old, to act like a kid... be safe
funny thing,chasing someone down hill on a bike 30 years older than theirs..
he said \\\\\\\'it was like watching a 250kg unguided weapon getting stuck up you bum\\\\\\\ http://www.bikepics.com/members/trixtrem/

Offline paulages

  • Old Timer
  • ******
  • Posts: 3,876
  • 1976 cb735
    • DOOMTOWN RIDERS P.R.M.C.
Re: making a custom fiberglass seatpan
« Reply #35 on: May 04, 2006, 01:21:55 AM »
i'll be happy when i get a good paint job on it. i shot too dry in a couple of places, and because of poor lighting i couldn't see the orange peel until i had it into good light. not so much on the seatpan as the tank, but i didn't want to put too much energy into either clearcoat until i had the basecoat sorted out well. it does have a few coats of clear on it, but it doesn't really shine yet.

sits under my ass just fine... ;D
« Last Edit: March 18, 2007, 09:23:53 PM by paulages »
Logged
paul
SOHC4 member #1050

1974 CB550 (735cc)
1976 CB550 (590cc) road racer
1973 CB750K3
1972 NORTON Commando Combat
1996 KLX650 R

Offline paulages

  • Old Timer
  • ******
  • Posts: 3,876
  • 1976 cb735
    • DOOMTOWN RIDERS P.R.M.C.
Re: making a custom fiberglass seatpan
« Reply #36 on: March 18, 2007, 09:25:19 PM »
i hotlinked this to someone asking about my seat, and realized that i never posted finished pictures. i'll edit the original post to contain them, so the step-by-step is all in one place.
Logged
paul
SOHC4 member #1050

1974 CB550 (735cc)
1976 CB550 (590cc) road racer
1973 CB750K3
1972 NORTON Commando Combat
1996 KLX650 R

chrisf

  • Guest
Re: making a custom fiberglass seatpan
« Reply #37 on: March 19, 2007, 05:48:00 AM »
Hi Paul:

How did you attach the fabric to the bottom of the seat? I too moulded my own seat and haven't figured out how I will attach the suede.

--Thanks, Chris
Logged

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: making a custom fiberglass seatpan
« Reply #38 on: March 19, 2007, 09:30:06 AM »
Wait till you see Pauls new aluminum seat :)
Logged
No.

Offline paulages

  • Old Timer
  • ******
  • Posts: 3,876
  • 1976 cb735
    • DOOMTOWN RIDERS P.R.M.C.
Re: making a custom fiberglass seatpan
« Reply #39 on: March 19, 2007, 10:09:00 AM »
i attached i kind of crudely, actually, but it seems to be working pretty well. i made eyelets, and laced it up like a boot.

Logged
paul
SOHC4 member #1050

1974 CB550 (735cc)
1976 CB550 (590cc) road racer
1973 CB750K3
1972 NORTON Commando Combat
1996 KLX650 R

Offline MrFry

  • Enthusiast
  • **
  • Posts: 224
    • T-Fry.com <--Under Construction
Re: making a custom fiberglass seatpan
« Reply #40 on: March 19, 2007, 10:12:46 AM »
Quote from: mlinder on March 19, 2007, 09:30:06 AM
Wait till you see Pauls new aluminum seat :)
do tell!
Logged

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: making a custom fiberglass seatpan
« Reply #41 on: March 19, 2007, 10:15:27 AM »
Quote from: MrFry on March 19, 2007, 10:12:46 AM
Quote from: mlinder on March 19, 2007, 09:30:06 AM
Wait till you see Pauls new aluminum seat :)
do tell!
It looks tits, er, looks great so far.
Logged
No.

chrisf

  • Guest
Re: making a custom fiberglass seatpan
« Reply #42 on: March 19, 2007, 10:33:58 AM »
Quote
i attached i kind of crudely, actually, but it seems to be working pretty well. i made eyelets, and laced it up like a boot.

That was my plan as well. It's good to see it's working out.

--Thanks, Chris
Logged

Offline MrFry

  • Enthusiast
  • **
  • Posts: 224
    • T-Fry.com <--Under Construction
Re: making a custom fiberglass seatpan
« Reply #43 on: March 19, 2007, 12:00:35 PM »
Quote from: mlinder on March 19, 2007, 10:15:27 AM
Quote from: MrFry on March 19, 2007, 10:12:46 AM
Quote from: mlinder on March 19, 2007, 09:30:06 AM
Wait till you see Pauls new aluminum seat :)
do tell!
It looks tits, er, looks great so far.

any pictures/instructions?
i'd much rather go aluminum/steel than fiberglass
Logged

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: making a custom fiberglass seatpan
« Reply #44 on: March 19, 2007, 02:42:23 PM »
Quote from: MrFry on March 19, 2007, 12:00:35 PM
Quote from: mlinder on March 19, 2007, 10:15:27 AM
Quote from: MrFry on March 19, 2007, 10:12:46 AM
Quote from: mlinder on March 19, 2007, 09:30:06 AM
Wait till you see Pauls new aluminum seat :)
do tell!
It looks tits, er, looks great so far.

any pictures/instructions?
i'd much rather go aluminum/steel than fiberglass


I'm sure he'll post pics as it progresses. I don't want to put anything forward, it's Pauls baby.
Suffice to say it is shaping up to be a really nice seat.
Logged
No.

Offline paulages

  • Old Timer
  • ******
  • Posts: 3,876
  • 1976 cb735
    • DOOMTOWN RIDERS P.R.M.C.
Re: making a custom fiberglass seatpan
« Reply #45 on: March 19, 2007, 05:04:32 PM »
i'll post pictures when it's ready. i've been taking a metal shaping class, offered at a local community college. the instructor is one of these old-school hot-rod body builders. he's 70, and part of a dying breed of sheet-metal craftsman. billy and i were the only 2 people to sign up for the course. anyway, the cowl is almost done and i just have to weld the seat part to it. i've made all of the tools i need to make more and start trying to make tanks, but still have to build the english wheel. anyway, fiberglass is easier...
Logged
paul
SOHC4 member #1050

1974 CB550 (735cc)
1976 CB550 (590cc) road racer
1973 CB750K3
1972 NORTON Commando Combat
1996 KLX650 R

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: making a custom fiberglass seatpan
« Reply #46 on: April 23, 2008, 06:40:30 AM »
Paul

What did you do/use for the latch?

FJ
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline paulages

  • Old Timer
  • ******
  • Posts: 3,876
  • 1976 cb735
    • DOOMTOWN RIDERS P.R.M.C.
Re: making a custom fiberglass seatpan
« Reply #47 on: April 23, 2008, 10:46:10 AM »
Quote from: FunJimmy on April 23, 2008, 06:40:30 AM
Paul

What did you do/use for the latch?

FJ

what latch?  ;)

Logged
paul
SOHC4 member #1050

1974 CB550 (735cc)
1976 CB550 (590cc) road racer
1973 CB750K3
1972 NORTON Commando Combat
1996 KLX650 R

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: making a custom fiberglass seatpan
« Reply #48 on: April 23, 2008, 01:56:12 PM »
Thought so.
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0
Pages: 1 [2]   Go Up
« previous next »