« previous next »
Pages: [1]   Go Down

Author Topic: CR carbs question  (Read 1110 times)

0 Members and 1 Guest are viewing this topic.

traveler

  • Guest
CR carbs question
« on: July 22, 2010, 07:26:05 PM »
Ok, my CR carbs have arrived, and I have a question that I hope some of you may be able to help with.  Each carb has a 90 degree elbow fitting coming off of it, and the fuel tube going between the carbs has a T-fitting that is there as well.

Now....I'm guessing the T- fitting going between the carbs is the fuel inlet from the tank....and the individual fittings are overflows?

Please help!

~Joe
« Last Edit: July 22, 2010, 08:57:23 PM by traveler »
Logged

Offline Silverback

  • Hot Shot
  • ***
  • Posts: 388
Re: CR carbs question
« Reply #1 on: July 22, 2010, 07:36:22 PM »
You sir, are correct!
Logged
Chris
"It's hard to define soul. You get it in art. You get it in music, and occasionally you get it in machinery."
78 CB750F racer
78 CB750F stock
75 CB750K Baby Blue Sold (She was a great bike!)
71 CB750K (rusty rod)
77 cb550F Sold :(  Bought it Back :)
Basket case 73 CB750, 77 CB750F (Building now)
01 Aprilia Falco
76 kz400
96 BMW K1100LT

traveler

  • Guest
Re: CR carbs question
« Reply #2 on: July 22, 2010, 08:58:04 PM »
cool.  thanks.
Logged

Offline GammaFlat

  • Master
  • *****
  • Posts: 1,565
  • humanitas, qualitas, quantitas and velocitas
Re: CR carbs question
« Reply #3 on: July 22, 2010, 09:36:24 PM »
I'm sure this question has been asked before... do the CR carbs have the same spigot sizes and locations... so that the stock airbox would fit them? 
Logged
K6
K7 
Suzuki GN400 - Ignition fixed!
03 KLR650 - Doesn't do anything very well but.. well.. does everything.

traveler

  • Guest
Re: CR carbs question
« Reply #4 on: July 23, 2010, 02:02:11 PM »
I'm being told no....

~Joe
Logged
Pages: [1]   Go Up
« previous next »