« previous next »
Pages: [1]   Go Down

Author Topic: Ideas for an empty spot...  (Read 1289 times)

0 Members and 1 Guest are viewing this topic.

Offline Jarhead12

  • Full Member
  • *
  • Posts: 70
Ideas for an empty spot...
« on: July 24, 2010, 12:30:13 PM »
Ok so i'm putting a different light on the back of my bike and i'm deciding not to chop the fender because it seems to get when down here and i would rather not have a mud splash up my back. So there is the mounting point for the old light that will be left in the open. Any ideas of what to do with it?

The holes are 2 inches apart



Logged

Offline vern401

  • Enthusiast
  • **
  • Posts: 115
Re: Ideas for an empty spot...
« Reply #1 on: July 24, 2010, 03:32:39 PM »
Custom mounted turn lights?
Plate mount.
Logged
1972 SL350
1978 750F SS
1979 XC500 Custom
1991 ZX600C4 Ninja
1982 KZ550C-3

Offline tgtint

  • Full Member
  • *
  • Posts: 77
Re: Ideas for an empty spot...
« Reply #2 on: July 24, 2010, 03:40:30 PM »
  ;D
Logged
1973 CB750

Offline vern401

  • Enthusiast
  • **
  • Posts: 115
Re: Ideas for an empty spot...
« Reply #3 on: July 24, 2010, 03:51:30 PM »
Not a bad idea
Logged
1972 SL350
1978 750F SS
1979 XC500 Custom
1991 ZX600C4 Ninja
1982 KZ550C-3

Offline Flying J

  • Old Timer
  • ******
  • Posts: 3,386
Re: Ideas for an empty spot...
« Reply #4 on: July 24, 2010, 07:17:22 PM »
you can actually get that light for your bike
Logged

Offline vern401

  • Enthusiast
  • **
  • Posts: 115
Re: Ideas for an empty spot...
« Reply #5 on: July 24, 2010, 07:31:03 PM »
Not a bad idea as a secondary tail light.
Logged
1972 SL350
1978 750F SS
1979 XC500 Custom
1991 ZX600C4 Ninja
1982 KZ550C-3

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,114
  • Sunny Central Florida
Re: Ideas for an empty spot...
« Reply #6 on: July 24, 2010, 09:05:34 PM »
What kind of bike are you talking about? The holes shown in the picture of your fender are similar to the holes in my fender that attach the fender to the frame (CB750K8). The tail light holes on the K8 750 do not have near the stamping in the fender at the mounting location as shown in your picture.
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Jarhead12

  • Full Member
  • *
  • Posts: 70
Re: Ideas for an empty spot...
« Reply #7 on: July 24, 2010, 09:19:09 PM »
this isnt where it attaches to the frame. These are the secondary holes for the backlight mount
Logged
Pages: [1]   Go Up
« previous next »