« previous next »
Pages: 1 ... 4 5 [6] 7 8   Go Down

Author Topic: Speed Pony - 550 race bike recreation  (Read 49937 times)

0 Members and 17 Guests are viewing this topic.

Offline Syscrush

  • Expert
  • ****
  • Posts: 1,419
  • Sold. :(
Re: Speed Pony - 550 race bike recreation
« Reply #125 on: November 05, 2010, 05:00:22 AM »
Quote from: Tintop on November 04, 2010, 02:13:45 PM
How about a TZ750 style frame with a Water Buffalo, there are 3 engines sitting there. ;) :)
Interesting, but I couldn't live with myself running a 2-smoke, and I don't like the look of LC engines.

See what a fussy bastard I am?  ;)  But this thread is about YOUR dream bike, not mine.  BTW - does he do titanium?  I'm guessing not, that stuff's a pain to work...

Anyhow, enjoy your time in the shop this winter, I'll fire up the Duke for a ride to Bolton once it warms up again, and the beers are absolutely on me.
« Last Edit: November 05, 2010, 06:29:15 AM by Syscrush »
Logged
Life is precious: wear your f'n helmet!
There's nothing more expensive than a free bike...
FWIW, I'm not a shill for Race Tech - I've just got a thing for good suspension and the RTCE's are the most cost-effective mod for these old damping rod front ends.

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #126 on: November 05, 2010, 01:54:33 PM »
Looking forward to getting together for a ride with the GTA SOHC4 gang next spring. :)

Byron is the welder, I'll ask him about Ti, but that stuff requires very deep pockets. ;) ;D  As for a frame for your Suzuki engine, just tell him what type you want (eg TZ / Rickman / Egli ;) / Martin / Seely), and supply an engine.  Oh, and a few $'s. ;) :)

It's only about an hour+ from Brock Rd & 401 to Trenton.  So any time you would like to come down, just let me know.  Right now I usually go down on Saturdays.
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #127 on: November 17, 2010, 06:41:03 PM »
I have been spending most of my time finishing off my 550 cafe.  However the 750K3 frame is ready to be power washed, and then it's time to get in the 'build line'.  So only a small step forward, but progress.

On an other note.  The pictures of my 350/4 in the Drixton frame, has led to some orders.  Maybe a Drixton 350/4 street bike should go back on the list. ;) :)
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline Syscrush

  • Expert
  • ****
  • Posts: 1,419
  • Sold. :(
Re: Speed Pony - 550 race bike recreation
« Reply #128 on: November 18, 2010, 06:46:54 AM »
Quote from: Tintop on November 17, 2010, 06:41:03 PM
On an other note.  The pictures of my 350/4 in the Drixton frame, has led to some orders.  Maybe a Drixton 350/4 street bike should go back on the list. ;) :)
Sorry, wait, what?  Back up a step here.

You have a 350/4?

And Denis stuck it into a Drixton frame?

And there are pictures?  :o

Where are they?  Did I manage to miss 'em somehow?  ???
Logged
Life is precious: wear your f'n helmet!
There's nothing more expensive than a free bike...
FWIW, I'm not a shill for Race Tech - I've just got a thing for good suspension and the RTCE's are the most cost-effective mod for these old damping rod front ends.

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #129 on: November 18, 2010, 02:34:47 PM »
Quote from: Syscrush on November 18, 2010, 06:46:54 AM
Quote from: Tintop on November 17, 2010, 06:41:03 PM
On an other note.  The pictures of my 350/4 in the Drixton frame, has led to some orders.  Maybe a Drixton 350/4 street bike should go back on the list. ;) :)
Sorry, wait, what?  Back up a step here.
You have a 350/4?
And Denis stuck it into a Drixton frame?
And there are pictures?  :o
Where are they?  Did I manage to miss 'em somehow?  ???

They were posted in a High Performance thread Syscrush, but just for you here they are. ;) :)  As you can see some dismantling was required to get it in the 1st time.  The only change to the original design will be to change the bend postition of the two upper frame tubes (at the cam).  Slightly higher, and a bit wider.




Denis now has two confirmed, and one pending order.
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline fastbroshi

  • Puppet
  • Old Timer
  • ******
  • Posts: 2,645
Re: Speed Pony - 550 race bike recreation
« Reply #130 on: November 18, 2010, 04:11:31 PM »
  What motor was that frame originally designed to hold?  I imagine a twin of some sort?
Logged
Just call me Timmaaaaay!!!

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #131 on: November 18, 2010, 04:41:56 PM »
Quote from: fastbroshi on November 18, 2010, 04:11:31 PM
  What motor was that frame originally designed to hold?  I imagine a twin of some sort?

Originally it was designed for the Honda 350/450/500 twins.  Denis has also built a couple for the Yamaha 650 twin.  For that application, because of the tall engine, there is a cavity in the bottom of the tank. ;)
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline Syscrush

  • Expert
  • ****
  • Posts: 1,419
  • Sold. :(
Re: Speed Pony - 550 race bike recreation
« Reply #132 on: November 18, 2010, 07:18:52 PM »
Thanks for sharing those pics!  My wallet just bit my junk and flew out of my pocket.  :o

Down, boy! Down!   ;D
Logged
Life is precious: wear your f'n helmet!
There's nothing more expensive than a free bike...
FWIW, I'm not a shill for Race Tech - I've just got a thing for good suspension and the RTCE's are the most cost-effective mod for these old damping rod front ends.

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #133 on: November 21, 2010, 04:11:09 PM »
The 350 was on the list of projects.  Still thinking a 350/4 Drixton street bike would make a nice bit of kit, as they say.
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline cdoggy81

  • Enthusiast
  • **
  • Posts: 174
Re: Speed Pony - 550 race bike recreation
« Reply #134 on: November 21, 2010, 07:02:46 PM »
subscribed :)
Logged

Offline SF

  • Hot Shot
  • ***
  • Posts: 527
  • I burn gas very well
Re: Speed Pony - 550 race bike recreation
« Reply #135 on: November 25, 2010, 12:46:06 PM »
WOW another thread!! this bike has to be the best kept secret....when the frames are available I'll have to dig a little deeper.I have another 550 motor that needs a home ;D. I met Robbie 2-3 times back in the Rocket days, my bro hung around there with those guys. How is Robbie? does he still have that eddy replica?
Logged
92 wr250 sold
98 zx6r sold
04 zx10r
73 cb350 twin
75 cb550f
75 cb550f
72 r5c
rgid springer bobber project

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #136 on: November 25, 2010, 01:20:12 PM »
Quote from: SF on November 25, 2010, 12:46:06 PM
WOW another thread!! this bike has to be the best kept secret....when the frames are available I'll have to dig a little deeper.I have another 550 motor that needs a home ;D. I met Robbie 2-3 times back in the Rocket days, my bro hung around there with those guys. How is Robbie? does he still have that eddy replica?

Robbie is still Robbie, Rocket is still at the old location, and the Kawi is in the 'showroom'.

The frame build will start to move forward very shortly, and I'll post lots of pictures then.  I have been concentrating on finishing my 550 cafe, and Denis has been busy filling orders.  A client in Oz ordered an H2R frame, then turned around and also ordered a TZ750 one. :o  So that set things back a bit. ;)
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Speed Pony - 550 race bike recreation
« Reply #137 on: November 25, 2010, 04:07:57 PM »
TT you have far too much on your hands there mate, better send half that stuff to me in Aus...... ;D

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #138 on: November 25, 2010, 05:10:33 PM »
Quote from: retro rocket on November 25, 2010, 04:07:57 PM
TT you have far too much on your hands there mate, better send half that stuff to me in Aus...... ;D
Mick

They say we are in for a very cold winter this year.  I wonder if I could declare a frame as 'carry on'? ;) ;D
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Speed Pony - 550 race bike recreation
« Reply #139 on: November 25, 2010, 05:24:29 PM »
Quote from: Tintop on November 25, 2010, 05:10:33 PM
Quote from: retro rocket on November 25, 2010, 04:07:57 PM
TT you have far too much on your hands there mate, better send half that stuff to me in Aus...... ;D
Mick

They say we are in for a very cold winter this year.  I wonder if I could declare a frame as 'carry on'? ;) ;D

HAHA, i like the way you think mate but i bet customs doesn't..... ;D

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #140 on: November 25, 2010, 06:02:43 PM »
Quote from: retro rocket on November 25, 2010, 05:24:29 PM
Quote from: Tintop on November 25, 2010, 05:10:33 PM
Quote from: retro rocket on November 25, 2010, 04:07:57 PM
TT you have far too much on your hands there mate, better send half that stuff to me in Aus...... ;D
Mick

They say we are in for a very cold winter this year.  I wonder if I could declare a frame as 'carry on'? ;) ;D

HAHA, i like the way you think mate but i bet customs doesn't..... ;D

Mick

OK then, I'll say its a prosthetic for my injured hand. :D :D   Bet those scanners go nuts though. ;)

Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline joshuanagao

  • Enthusiast
  • **
  • Posts: 104
Re: Speed Pony - 550 race bike recreation
« Reply #141 on: November 30, 2010, 01:28:39 PM »
TT-
This build is absolutely SICK!  I can't wait to see the finished product.  Keep up the amazing work!
Logged

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #142 on: November 30, 2010, 02:16:01 PM »
Quote from: joshuanagao on November 30, 2010, 01:28:39 PM
TT-
This build is absolutely SICK!  I can't wait to see the finished product.  Keep up the amazing work!

Thanks.  Unfortunately Denis has had to have a minor operation, so things are on hold for a couple of weeks.
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #143 on: December 09, 2010, 12:42:21 PM »
Quick update for those interested in the Drixton 350/4 frame.  The 1st one just came off the frame table, still work needed (engine mounts ect.), but I know how you love pictures. ;) :)



Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Speed Pony - 550 race bike recreation
« Reply #144 on: December 09, 2010, 02:14:56 PM »
Very nice...

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #145 on: December 09, 2010, 04:07:25 PM »
Quote from: retro rocket on December 09, 2010, 02:14:56 PM
Very nice...
Mick

There are times I shouldn't go into that shop. ;)  It's can be worse than the Inspiration Thread for creating that 'I want it, I want it' feeling. ;D
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline HalfFastMoto

  • Full Member
  • *
  • Posts: 68
Re: Speed Pony - 550 race bike recreation
« Reply #146 on: December 10, 2010, 04:40:29 PM »
Sweet   ;D
Logged
-brad

Better HalfFast than HalfA$$ed
The appropriate number of bikes is "1" more!

Offline SF

  • Hot Shot
  • ***
  • Posts: 527
  • I burn gas very well
Re: Speed Pony - 550 race bike recreation
« Reply #147 on: December 11, 2010, 08:04:02 AM »
TT what tyre/rim sizes did speed pony use then? It would be interesting to do a comp from then and now...
Logged
92 wr250 sold
98 zx6r sold
04 zx10r
73 cb350 twin
75 cb550f
75 cb550f
72 r5c
rgid springer bobber project

Offline Tintop

  • Old Timer
  • ******
  • Posts: 3,965
Re: Speed Pony - 550 race bike recreation
« Reply #148 on: December 11, 2010, 03:29:19 PM »
Quote from: SF on December 11, 2010, 08:04:02 AM
TT what tyre/rim sizes did speed pony use then? It would be interesting to do a comp from then and now...

The rims I have for it are the same size as used.  The originals were 18" TZ750 DID's.  I am using an Akront 'Red Label' WM3 (2.15") on the front, and a NOS Akront 'Green Label' WM6 (3.5") on the rear.  The hubs are SOHC 750, the rear being a drilled F disk setup.  The front wheel I have is complete, with black powder coated Buchanan SS spokes.  However both the hub and rim need refinishing, so it will come apart at some point.  The rear assembly is already polished, just needs new bearings, and the disk is ready.  The MC & caliper are in good condition, but will get rebuild kits.  The rim is as new, never been mounted, just need to order the spokes.  If I can get the front apart without damaging the powder coat, I'll do the rears to match.  Otherwise I'll strip the fronts and go with plain SS f / r.
Logged
1977 CB550/4 Cafe - Speed Warrior / BOTM 03/11
1980 CB750F (project)
Whittaker GBF Vintage Racing Sidecar (XS750 power) - ITG / 151's / CMR Racing Products (SOLD)
1976 CB400 SS - stock / BOTM 04/11 (SOLD)
1973 CB750 K - basket case (SOLD)
77 CB550 Cafe build
550/750 Filter Thread
Sidecar Rebuild Thread

Offline HedNut

  • Underwater Basket Weaving
  • Expert
  • ****
  • Posts: 844
  • CB750...A Two-wheeled hellcat from Planet Kickass
Re: Speed Pony - 550 race bike recreation
« Reply #149 on: December 12, 2010, 07:12:22 AM »
Quote from: Tintop on December 09, 2010, 12:42:21 PM
Quick update for those interested in the Drixton 350/4 frame.  The 1st one just came off the frame table, still work needed (engine mounts ect.), but I know how you love pictures. ;) :)





That's HOT!
Logged
Pages: 1 ... 4 5 [6] 7 8   Go Up
« previous next »