Author Topic: 1976 CB750F project. DARKSIDE (Read 27208 times)

bluesmoke69 · « **on:** August 14, 2010, 06:33:51 PM »

Here are some pictures of my bike.]

bluesmoke69 · « **Reply #1 on:** August 14, 2010, 06:53:19 PM »

Sorry computer hates me.LOL

Doctor_D · « **Reply #2 on:** August 15, 2010, 04:06:36 PM »

Hard to tell from the small pics, but it looks like a clean bike. Good luck.

bluesmoke69 · « **Reply #3 on:** August 22, 2010, 09:36:33 PM »

Started to get some work done.

bluesmoke69 · « **Reply #4 on:** August 26, 2010, 10:08:27 PM »

I made a soda blaster last weekend with the information I found here on the forum. I found some blasting material at Menard's called black blast. It worked very well in the clear tote for removing heavy paint on brake calipers that I am now polishing.

tweakin · « **Reply #5 on:** August 27, 2010, 04:39:17 AM »

Looking good bluesmoke69. The soda blaster will really help to clean up old snotty parts.

bluesmoke69 · « **Reply #6 on:** September 02, 2010, 05:40:33 PM »

Getting some work done. Working on turn signals, and head stock bearings.

bluesmoke69 · « **Reply #7 on:** September 02, 2010, 05:46:31 PM »

More pictures

bluesmoke69 · « **Reply #8 on:** September 02, 2010, 06:02:37 PM »

More pictures.

bluesmoke69 · « **Reply #9 on:** September 02, 2010, 06:04:21 PM »

Pictures of triple tree being cut down.

smpls70 · « **Reply #10 on:** September 02, 2010, 06:08:26 PM »

Quote from: bluesmoke69 on September 02, 2010, 06:02:37 PM

More pictures.

That looks real nice!!!!!!!!Where in MN are you ?

bluesmoke69 · « **Reply #11 on:** September 02, 2010, 06:38:23 PM »

Coon Rapids.

bluesmoke69 · « **Reply #12 on:** September 03, 2010, 10:09:13 AM »

More photos.

bluesmoke69 · « **Reply #13 on:** September 03, 2010, 10:10:35 AM »

New clip on to go with newly polished triple tree.

bluesmoke69 · « **Reply #14 on:** September 09, 2010, 10:05:01 PM »

Got bike back together but had some exhaust leaks so the pipes will have to come off this weekend. Will install some new round copper washer. The bike sounded like a drag bike with open headers from the exhaust leak. Hope to get some riding in before the snow flies.

Retro Rocket · « **Reply #15 on:** September 09, 2010, 11:54:04 PM »

Nice looking bike mate, i like the cut of that seat..

Mick

traveler · « **Reply #16 on:** September 10, 2010, 03:32:06 AM »

nice work. neat bike.

bluesmoke69 · « **Reply #17 on:** November 28, 2010, 12:16:48 AM »

It getting cold out!! Got to ride her a few times, but not firing on # 1 cylinder all the time think it is a carb. issue. Time to due a total tear down to address a few issues like rust on frame and some wiring issues. Will post pictures as I slowly go. You know how that job and school get in the way!! LMAO

Stev-o · « **Reply #18 on:** November 28, 2010, 09:56:45 AM »

Quote from: bluesmoke69 on September 03, 2010, 10:09:13 AM

More photos.

Did you polish or buy? Looks great, I want to do mine.

bluesmoke69 · « **Reply #19 on:** November 28, 2010, 11:26:09 AM »

Polished most of parts on buffing wheel from harbor freight. I used to work in a grinding and polishing shop. It not really that had just have to take your time, you can due it. Thanks for your kind words.

bluesmoke69 · « **Reply #20 on:** December 28, 2010, 05:35:43 PM »

What kind of torque wrench do you most of you guy use?

lofton05 · « **Reply #21 on:** December 28, 2010, 06:59:22 PM »

Use a Craftsman Beam Torque Wrench. Got it from sears for under 30 bucks.

bluesmoke69 · « **Reply #22 on:** December 29, 2010, 12:38:55 AM »

Thanks for your reply !!

tweakin · « **Reply #23 on:** December 29, 2010, 05:40:35 AM »

Same here.

Quote from: lofton05 on December 28, 2010, 06:59:22 PM

Use a Craftsman Beam Torque Wrench. Got it from sears for under 30 bucks.

bluesmoke69 · « **Reply #24 on:** December 29, 2010, 08:19:47 PM »

Going to make a foam mold for new seat plan this week. Anybody have a solo seat for single riding, and another seat so the wife or girlfriend can ride. Thinking of make a Fiberglass seat two diffrent molds one single and the other double. Thanks for any thoughts.

News:

Author Topic: 1976 CB750F project. DARKSIDE (Read 27208 times)

traveler