just aquired for free a 1981 cb900f fuel tank and swing arm. they are going to go on my 1976 CB750F. just a minor wee bit of rubbber mallet to front of seat and it fits beautifully. the swing arm is almost there....have to tape off and remove roughly 1/2 inch off right side of pivot. and have a new inner sleeve made for my original bolt...I'm not gonna try and drill the frame out to 41/64......easier to just have sleeve made. new set of bearings are ordered...roughly 20 bucks from Z1.
Now to find a good set of Harley shocks for the rear...or some of those neato remote reservoir shocks.
